bmesh_marking.cc File Reference

#include <cstddef>
#include "MEM_guardedalloc.h"
#include "DNA_scene_types.h"
#include "BLI_listbase.h"
#include "BLI_math_vector.h"
#include "BLI_task.h"
#include "bmesh.hh"
#include "bmesh_structure.hh"
#include "bmesh_private.hh"

Go to the source code of this file.

Classes
struct	SelectionCountChunkData
struct	SelectionFlushChunkData

Functions
void	BM_mesh_select_mode_clean_ex (BMesh *bm, const short selectmode)
	Select Mode Clean.
void	BM_mesh_select_mode_clean (BMesh *bm)
void	BM_mesh_deselect_flush (BMesh *bm)
void	BM_mesh_select_flush (BMesh *bm)
void	BM_vert_select_set (BMesh *bm, BMVert *v, const bool select)
	Select Vert.
void	BM_edge_select_set (BMesh *bm, BMEdge *e, const bool select)
	Select Edge.
void	BM_face_select_set (BMesh *bm, BMFace *f, const bool select)
	Select Face.
void	BM_mesh_select_mode_set (BMesh *bm, int selectmode)
static int	bm_mesh_flag_count (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool test_for_enabled)
int	BM_mesh_elem_hflag_count_enabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)
int	BM_mesh_elem_hflag_count_disabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)
void	BM_elem_select_set (BMesh *bm, BMElem *ele, const bool select)
void	BM_mesh_active_face_set (BMesh *bm, BMFace *f)
int	BM_mesh_active_face_index_get (BMesh *bm, bool is_sloppy, bool is_selected)
int	BM_mesh_active_edge_index_get (BMesh *bm)
int	BM_mesh_active_vert_index_get (BMesh *bm)
BMFace *	BM_mesh_active_face_get (BMesh *bm, const bool is_sloppy, const bool is_selected)
BMEdge *	BM_mesh_active_edge_get (BMesh *bm)
BMVert *	BM_mesh_active_vert_get (BMesh *bm)
BMElem *	BM_mesh_active_elem_get (BMesh *bm)
void	BM_editselection_center (BMEditSelection *ese, float r_center[3])
void	BM_editselection_normal (BMEditSelection *ese, float r_normal[3])
void	BM_editselection_plane (BMEditSelection *ese, float r_plane[3])
static BMEditSelection *	bm_select_history_create (BMHeader *ele)
bool	_bm_select_history_check (BMesh *bm, const BMHeader *ele)
bool	_bm_select_history_remove (BMesh *bm, BMHeader *ele)
void	_bm_select_history_store_notest (BMesh *bm, BMHeader *ele)
void	_bm_select_history_store_head_notest (BMesh *bm, BMHeader *ele)
void	_bm_select_history_store (BMesh *bm, BMHeader *ele)
void	_bm_select_history_store_head (BMesh *bm, BMHeader *ele)
void	_bm_select_history_store_after_notest (BMesh *bm, BMEditSelection *ese_ref, BMHeader *ele)
void	_bm_select_history_store_after (BMesh *bm, BMEditSelection *ese_ref, BMHeader *ele)
void	BM_select_history_clear (BMesh *bm)
void	BM_select_history_validate (BMesh *bm)
bool	BM_select_history_active_get (BMesh *bm, BMEditSelection *ese)
GHash *	BM_select_history_map_create (BMesh *bm)
void	BM_select_history_merge_from_targetmap (BMesh *bm, GHash *vert_map, GHash *edge_map, GHash *face_map, const bool use_chain)
void	BM_mesh_elem_hflag_disable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)
void	BM_mesh_elem_hflag_enable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)
void	BM_mesh_elem_hflag_disable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)
void	BM_mesh_elem_hflag_enable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)
static void	vert_flush_hide_set (BMVert *v)
static void	edge_flush_hide_set (BMEdge *e)
void	BM_vert_hide_set (BMVert *v, const bool hide)
void	BM_edge_hide_set (BMEdge *e, const bool hide)
void	BM_face_hide_set (BMFace *f, const bool hide)
void	_bm_elem_hide_set (BMesh *bm, BMHeader *head, const bool hide)
Recounting total selection.
static void	recount_totsels_range_vert_func (void *, MempoolIterData *iter, const TaskParallelTLS *__restrict tls)
static void	recount_totsels_range_edge_func (void *, MempoolIterData *iter, const TaskParallelTLS *__restrict tls)
static void	recount_totsels_range_face_func (void *, MempoolIterData *iter, const TaskParallelTLS *__restrict tls)
static void	recount_totsels_reduce (const void *__restrict, void *__restrict chunk_join, void *__restrict chunk)
static TaskParallelMempoolFunc	recount_totsels_get_range_func (BMIterType iter_type)
static int	recount_totsel (BMesh *bm, BMIterType iter_type)
static void	recount_totvertsel (BMesh *bm)
static void	recount_totedgesel (BMesh *bm)
static void	recount_totfacesel (BMesh *bm)
static void	recount_totsels (BMesh *bm)
static bool	recount_totsels_are_ok (BMesh *bm)
BMesh helper functions for selection & hide flushing.
static bool	bm_vert_is_edge_select_any_other (const BMVert *v, const BMEdge *e_first)
static bool	bm_vert_is_edge_visible_any (const BMVert *v)
static bool	bm_edge_is_face_select_any_other (BMLoop *l_first)
static bool	bm_edge_is_face_visible_any (const BMEdge *e)
Select mode flush selection
static void	bm_mesh_select_mode_flush_vert_to_edge_iter_fn (void *, MempoolIterData *iter, const TaskParallelTLS *__restrict tls)
static void	bm_mesh_select_mode_flush_edge_to_face_iter_fn (void *, MempoolIterData *iter, const TaskParallelTLS *__restrict tls)
static void	bm_mesh_select_mode_flush_reduce_fn (const void *__restrict, void *__restrict chunk_join, void *__restrict chunk)
static void	bm_mesh_select_mode_flush_vert_to_edge (BMesh *bm)
static void	bm_mesh_select_mode_flush_edge_to_face (BMesh *bm)
void	BM_mesh_select_mode_flush_ex (BMesh *bm, const short selectmode, eBMSelectionFlushFLags flags)
	Select Mode Flush.
void	BM_mesh_select_mode_flush (BMesh *bm)
Non Flushing Versions Element Selection
void	BM_edge_select_set_noflush (BMesh *bm, BMEdge *e, const bool select)
void	BM_face_select_set_noflush (BMesh *bm, BMFace *f, const bool select)

Detailed Description

Selection routines for bmesh structures. This is actually all old code ripped from editmesh_lib.c and slightly modified to work for bmesh's. This also means that it has some of the same problems.... something that that should be addressed eventually.

Definition in file bmesh_marking.cc.

Function Documentation

_bm_elem_hide_set()

void _bm_elem_hide_set	(	BMesh *	bm,
		BMHeader *	head,
		const bool	hide )

Definition at line 1488 of file bmesh_marking.cc.

References bm, BM_EDGE, BM_edge_hide_set(), BM_edge_select_set(), BM_FACE, BM_face_hide_set(), BM_face_select_set(), BM_VERT, BM_vert_hide_set(), BM_vert_select_set(), BMESH_ASSERT, and BMHeader::htype.

_bm_select_history_check()

bool _bm_select_history_check	(	BMesh *	bm,
		const BMHeader *	ele )

Definition at line 1048 of file bmesh_marking.cc.

References BLI_findptr(), bm, and offsetof.

_bm_select_history_remove()

bool _bm_select_history_remove	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1053 of file bmesh_marking.cc.

References BLI_findptr(), BLI_freelinkN(), bm, and offsetof.

_bm_select_history_store()

void _bm_select_history_store	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1076 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_notest.

_bm_select_history_store_after()

void _bm_select_history_store_after	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele )

Definition at line 1096 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_after_notest.

_bm_select_history_store_after_notest()

void _bm_select_history_store_after_notest	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele )

Definition at line 1090 of file bmesh_marking.cc.

References BLI_insertlinkafter(), bm, and bm_select_history_create().

_bm_select_history_store_head()

void _bm_select_history_store_head	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1083 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_head_notest.

_bm_select_history_store_head_notest()

void _bm_select_history_store_head_notest	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1070 of file bmesh_marking.cc.

References BLI_addhead(), bm, and bm_select_history_create().

_bm_select_history_store_notest()

void _bm_select_history_store_notest	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1064 of file bmesh_marking.cc.

References BLI_addtail(), bm, and bm_select_history_create().

BM_edge_hide_set()

void BM_edge_hide_set	(	BMEdge *	e,
		const bool	hide )

Definition at line 1424 of file bmesh_marking.cc.

References BLI_assert, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, BMLoop::f, BMLoop::radial_next, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

bm_edge_is_face_select_any_other()

bool bm_edge_is_face_select_any_other ( BMLoop * l_first )

static

Definition at line 197 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, BMLoop::f, and BMLoop::radial_next.

Referenced by BM_face_select_set().

bm_edge_is_face_visible_any()

bool bm_edge_is_face_visible_any ( const BMEdge * e )

static

Definition at line 226 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_HIDDEN, e, BMLoop::f, and BMLoop::radial_next.

Referenced by edge_flush_hide_set().

BM_edge_select_set()

void BM_edge_select_set	(	BMesh *	bm,
		BMEdge *	e,
		bool	select )

Select Edge.

Changes selection state of a single edge in a mesh.

Definition at line 538 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), e, i, SCE_SELECT_VERTEX, select, and v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), BM_face_select_set(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_clean_ex(), BM_mesh_select_mode_set(), bm_vert_connect_select_history(), do_lasso_select_mesh__doSelectEdge_pass0(), do_lasso_select_mesh__doSelectEdge_pass1(), do_mesh_box_select__doSelectEdge_pass0(), do_mesh_box_select__doSelectEdge_pass1(), edbm_add_edge_face_exec__tricky_extend_sel(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_edges(), edbm_intersect_select(), edbm_polybuild_transform_at_cursor_invoke(), edbm_region_to_loop_exec(), edbm_rip_edge_invoke(), edbm_ripsel_deselect_helper(), edbm_select_by_pole_count_exec(), edbm_select_linked_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), edbm_select_non_manifold_exec(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_sharp_edges_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), edgering_select(), edgetag_set_cb(), knife_make_cuts(), knife_make_face_cuts(), mesh_circle_doSelectEdge(), mouse_mesh_shortest_path_edge(), similar_edge_select_exec(), uv_hide_exec(), uvedit_edge_select_disable(), and uvedit_edge_select_enable().

BM_edge_select_set_noflush()

void BM_edge_select_set_noflush	(	BMesh *	bm,
		BMEdge *	e,
		const bool	select )

Definition at line 657 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, and select.

Referenced by BM_face_select_set(), and bm_vert_collapse_edge_and_merge().

BM_editselection_center()

void BM_editselection_center	(	BMEditSelection *	ese,
		float	r_center[3] )

Generic way to get data from an BMEditSelection type These functions were written to be used by the Modifier widget when in Rotate about active mode, but can be used anywhere.

• BM_editselection_center
• BM_editselection_normal
• BM_editselection_plane

Definition at line 938 of file bmesh_marking.cc.

References BM_EDGE, BM_FACE, BM_face_calc_center_median(), BM_VERT, BMVert::co, copy_v3_v3(), BMEditSelection::ele, BMEditSelection::htype, mid_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by BM_editselection_plane(), blender::ed::object::calc_active_center_for_editmode(), blender::ed::transform::transform_convert_mesh_islands_calc(), and uv_map_transform_center().

BM_editselection_normal()

void BM_editselection_normal	(	BMEditSelection *	ese,
		float	r_normal[3] )

Definition at line 954 of file bmesh_marking.cc.

References add_v3_v3v3(), BM_EDGE, BM_FACE, BM_VERT, BMVert::co, copy_v3_v3(), cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, BMFace::no, BMVert::no, normalize_v3(), sub_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by blender::ed::transform::getTransformOrientation_ex(), and blender::ed::transform::transform_convert_mesh_islands_calc().

BM_editselection_plane()

void BM_editselection_plane	(	BMEditSelection *	ese,
		float	r_plane[3] )

Calculate a plane that is right angles to the edge/vert/faces normal also make the plane run along an axis that is related to the geometry, because this is used for the gizmos Y axis.

Definition at line 982 of file bmesh_marking.cc.

References BM_EDGE, BM_edge_is_boundary(), BM_editselection_center(), BM_FACE, BM_face_calc_tangent_auto(), BM_VERT, BMVert::co, cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, BMEdge::l, BMLoop::next, BMVert::no, normalize_v3(), BMEditSelection::prev, sub_v3_v3v3(), BMLoop::v, BMEdge::v1, and BMEdge::v2.

Referenced by blender::ed::transform::getTransformOrientation_ex(), and blender::ed::transform::transform_convert_mesh_islands_calc().

BM_elem_select_set()

void BM_elem_select_set	(	BMesh *	bm,
		BMElem *	ele,
		bool	select )

Note

use BM_elem_flag_test(ele, BM_ELEM_SELECT) to test selection

by design, this will not touch the editselection history stuff

Definition at line 818 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_edge_select_set(), BM_FACE, BM_face_select_set(), BM_VERT, BM_vert_select_set(), BMElem::head, BMHeader::htype, and select.

Referenced by BM_elem_select_copy(), BM_mesh_elem_hflag_disable_test(), BM_mesh_elem_hflag_enable_test(), BMO_slot_buffer_hflag_disable(), BMO_slot_buffer_hflag_enable(), bpy_bm_elem_hflag_set(), bpy_bm_elem_select_set(), edbm_extrude_ex(), EDBM_mesh_reveal(), edbm_select_by_attribute_exec(), walker_deselect_nth(), and walker_select().

BM_face_hide_set()

void BM_face_hide_set	(	BMFace *	f,
		const bool	hide )

Definition at line 1453 of file bmesh_marking.cc.

References BLI_assert, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, BMLoop::e, edge_flush_hide_set(), BMFace::head, BMHeader::htype, BMLoop::next, BMLoop::v, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

BM_face_select_set()

void BM_face_select_set	(	BMesh *	bm,
		BMFace *	f,
		bool	select )

Select Face.

Changes selection state of a single face in a mesh.

Note

This allows a temporarily invalid state - where for eg an edge bay be de-selected, but an adjacent face remains selected.

Rely on BM_mesh_select_mode_flush to correct these cases.

Note

flushing based on mode, see #46494

use BM_edge_select_set_noflush, vertex flushing is handled last.

Definition at line 578 of file bmesh_marking.cc.

References BLI_assert, bm, bm_edge_is_face_select_any_other(), BM_edge_select_set(), BM_edge_select_set_noflush(), BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), BMLoop::e, BMFace::head, BMHeader::htype, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_VERTEX, select, and BMLoop::v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), bm_face_split_by_edges(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_set(), do_lasso_select_mesh__doSelectFace(), do_mesh_box_select__doSelectFace(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_faces(), EDBM_deselect_by_material(), edbm_extrude_discrete_faces(), edbm_loop_to_region_exec(), edbm_mod_weighted_strength_exec(), edbm_polybuild_transform_at_cursor_invoke(), edbm_select_by_pole_count_exec(), edbm_select_face_by_sides_exec(), EDBM_select_interior_faces(), edbm_select_linked_exec(), edbm_select_linked_flat_faces_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_similar_region_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), facetag_set_cb(), mesh_circle_doSelectFace(), similar_face_select_exec(), uv_hide_exec(), uvedit_edge_select_disable(), uvedit_edge_select_enable(), uvedit_face_select_disable(), uvedit_face_select_enable(), uvedit_uv_select_disable(), and uvedit_uv_select_enable().

BM_face_select_set_noflush()

void BM_face_select_set_noflush	(	BMesh *	bm,
		BMFace *	f,
		const bool	select )

Definition at line 679 of file bmesh_marking.cc.

References BLI_assert, bm, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BMFace::head, BMHeader::htype, and select.

BM_mesh_active_edge_get()

BMEdge * BM_mesh_active_edge_get

(

BMesh *

bm

)

Definition at line 899 of file bmesh_marking.cc.

References bm, BM_EDGE, BMEditSelection::ele, and BMEditSelection::htype.

Referenced by BM_mesh_active_edge_index_get(), BM_mesh_region_match(), blender::draw::mesh_render_data_create(), and uv_shortest_path_pick_invoke().

BM_mesh_active_edge_index_get()

int BM_mesh_active_edge_index_get

(

BMesh *

bm

)

Definition at line 847 of file bmesh_marking.cc.

References bm, BM_elem_index_get, BM_mesh_active_edge_get(), and e.

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

BM_mesh_active_elem_get()

BMElem * BM_mesh_active_elem_get

(

BMesh *

bm

)

Definition at line 925 of file bmesh_marking.cc.

References bm, and BMEditSelection::ele.

Referenced by deselect_nth_active(), edbm_elem_active_elem_or_face_get(), edbm_preselect_or_active(), and blender::ed::mesh::set_attribute::mesh_set_attribute_invoke().

BM_mesh_active_face_get()

BMFace * BM_mesh_active_face_get	(	BMesh *	bm,
		const bool	is_sloppy,
		const bool	is_selected )

Definition at line 859 of file bmesh_marking.cc.

References bm, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACES_OF_MESH, BM_ITER_MESH, BMEditSelection::ele, BMEditSelection::htype, and BMEditSelection::prev.

Referenced by BM_mesh_active_face_index_get(), BM_select_history_active_get(), deselect_nth_active(), ED_space_image_auto_set(), ED_uvedit_get_aspect(), EDBM_uv_active_face_get(), blender::draw::mesh_render_data_create(), uv_shortest_path_pick_exec(), and uv_shortest_path_pick_invoke().

BM_mesh_active_face_index_get()

int BM_mesh_active_face_index_get	(	BMesh *	bm,
		bool	is_sloppy,
		bool	is_selected )

Definition at line 841 of file bmesh_marking.cc.

References bm, BM_elem_index_get, and BM_mesh_active_face_get().

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

BM_mesh_active_face_set()

void BM_mesh_active_face_set	(	BMesh *	bm,
		BMFace *	f )

Definition at line 836 of file bmesh_marking.cc.

References bm.

Referenced by EDBM_select_pick(), mouse_mesh_loop(), mouse_mesh_shortest_path_face(), mouse_mesh_uv_shortest_path_face(), and uv_mouse_select_multi().

BM_mesh_active_vert_get()

BMVert * BM_mesh_active_vert_get

(

BMesh *

bm

)

Definition at line 912 of file bmesh_marking.cc.

References bm, BM_VERT, BMEditSelection::ele, and BMEditSelection::htype.

Referenced by BM_mesh_active_vert_index_get(), ED_mesh_active_dvert_get_em(), edbm_fill_grid_prepare(), edbm_select_axis_exec(), blender::ed::transform::getTransformOrientation_ex(), blender::draw::mesh_render_data_create(), and uv_shortest_path_pick_invoke().

BM_mesh_active_vert_index_get()

int BM_mesh_active_vert_index_get

(

BMesh *

bm

)

Definition at line 853 of file bmesh_marking.cc.

References bm, BM_elem_index_get, BM_mesh_active_vert_get(), and v.

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

BM_mesh_deselect_flush()

void BM_mesh_deselect_flush

(

BMesh *

bm

)

Mode independent de-selection flush (up/down).

Definition at line 442 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_ITER_MESH, BM_select_history_validate(), e, BMLoop::f, BMLoop::radial_next, and recount_totsels().

Referenced by bpy_bmesh_select_flush(), ED_uvedit_select_sync_flush(), EDBM_deselect_flush(), EDBM_selectmode_convert(), uv_mouse_select_loop_generic_multi(), and uv_select_linked_multi().

BM_mesh_elem_hflag_count_disabled()

int BM_mesh_elem_hflag_count_disabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 810 of file bmesh_marking.cc.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

BM_mesh_elem_hflag_count_enabled()

int BM_mesh_elem_hflag_count_enabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 802 of file bmesh_marking.cc.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

BM_mesh_elem_hflag_disable_all()

void BM_mesh_elem_hflag_disable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 1360 of file bmesh_marking.cc.

References bm, and BM_mesh_elem_hflag_disable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_bisect_plane(), BM_mesh_calc_edge_groups_as_arrays(), BM_mesh_esubdivide(), BM_mesh_intersect(), BM_mesh_region_match(), BM_mesh_wireframe(), bmo_bevel_exec(), bmo_bisect_plane_exec(), bmo_edgenet_fill_exec(), bmo_face_attribute_fill_exec(), bmo_holes_fill_exec(), bmo_inset_individual_exec(), bmo_inset_region_exec(), bmo_offset_edgeloops_exec(), bmo_split_edges_exec(), bmo_subdivide_edgering_exec(), bmo_triangulate_exec(), bmo_wireframe_exec(), bridge_loop_pair(), build_hull(), cylinder_project_exec(), blender::ed::sculpt_paint::face_set::delete_geometry(), do_lasso_select_mesh_uv(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_bridge_tag_boundary_edges(), edbm_delete_edgeloop_exec(), edbm_delete_loose_exec(), EDBM_flag_disable_all(), edbm_intersect_select(), edbm_loop_to_region_exec(), edbm_offset_edgeloop_exec(), EDBM_op_call_and_selectf(), edbm_region_to_loop_exec(), edbm_select_linked_flat_faces_exec(), edbm_split_exec(), edbm_wireframe_exec(), geometry_extract_apply(), geometry_extract_tag_face_set(), geometry_extract_tag_masked_faces(), hull_merge_triangles(), knifeproject_exec(), mesh_separate_loose(), mesh_separate_material(), mesh_separate_selected(), mesh_separate_tagged(), mesh_symmetry_snap_exec(), multires_unsubdivide_prepare_original_bmesh_for_extract(), multires_unsubdivide_single_level(), multires_unsubdivide_to_basemesh(), skin_fix_hole_no_good_verts(), skin_smooth_hulls(), slice_paint_mask(), smart_uv_project_calculate_project_normals(), blender::ed::transform::special_aftertrans_update__mesh(), sphere_project_exec(), blender::ed::sculpt_paint::symmetrize_exec(), unsubdivide_build_base_mesh_from_tags(), blender::ed::sculpt_paint::trim::update_normals(), uv_box_select_exec(), uv_circle_select_exec(), uv_select_edgering(), uv_select_faceloop(), uv_select_flush_from_tag_loop(), uv_select_more_less(), uv_select_overlap(), and blender::ed::object::vgroup_mirror().

BM_mesh_elem_hflag_disable_test()

void BM_mesh_elem_hflag_disable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test )

Definition at line 1237 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_select_history_clear(), BM_VERT, BM_VERTS_OF_MESH, i, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_disable_all().

BM_mesh_elem_hflag_enable_all()

void BM_mesh_elem_hflag_enable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 1369 of file bmesh_marking.cc.

References bm, and BM_mesh_elem_hflag_enable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_calc_path_region_edge(), BM_mesh_calc_path_region_face(), BM_mesh_calc_path_uv_region_face(), BM_mesh_edgesplit(), BM_mesh_separate_faces(), bmo_inset_region_exec(), EDBM_flag_enable_all(), EDBM_mesh_knife(), slice_paint_mask(), unsubdivide_build_base_mesh_from_tags(), and blender::ed::sculpt_paint::trim::update_normals().

BM_mesh_elem_hflag_enable_test()

void BM_mesh_elem_hflag_enable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test )

Definition at line 1306 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_VERT, BM_VERTS_OF_MESH, i, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_enable_all(), edbm_delete_edgeloop_exec(), edbm_edge_rotate_selected_exec(), edbm_remove_doubles_exec(), knifeproject_exec(), mesh_separate_selected(), and uv_reveal_exec().

bm_mesh_flag_count()

int bm_mesh_flag_count ( BMesh * bm, const char htype, const char hflag, const bool respecthide, const bool test_for_enabled )

static

counts number of elements with flag enabled/disabled

Definition at line 756 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_test, BM_elem_flag_test_bool, BM_ELEM_HIDDEN, BM_FACE, BM_FACES_OF_MESH, BM_ITER_MESH, BM_VERT, and BM_VERTS_OF_MESH.

Referenced by BM_mesh_elem_hflag_count_disabled(), and BM_mesh_elem_hflag_count_enabled().

BM_mesh_select_flush()

void BM_mesh_select_flush

(

BMesh *

bm

)

Mode independent selection flush (up/down).

Definition at line 474 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, e, BMLoop::next, recount_totsels(), and BMLoop::v.

Referenced by BM_mesh_esubdivide(), bpy_bmesh_select_flush(), ED_uvedit_select_sync_flush(), EDBM_select_flush(), uv_mouse_select_loop_generic_multi(), uv_select_similar_edge_exec(), uv_select_similar_face_exec(), uv_select_similar_island_exec(), and uv_select_similar_vert_exec().

BM_mesh_select_mode_clean()

void BM_mesh_select_mode_clean

(

BMesh *

bm

)

Definition at line 302 of file bmesh_marking.cc.

References bm, and BM_mesh_select_mode_clean_ex().

Referenced by EDBM_select_less().

BM_mesh_select_mode_clean_ex()

void BM_mesh_select_mode_clean_ex	(	BMesh *	bm,
		short	selectmode )

Select Mode Clean.

Remove isolated selected elements when in a mode doesn't support them. eg: in edge-mode a selected vertex must be connected to a selected edge.

Note

this could be made a part of BM_mesh_select_mode_flush_ex

Definition at line 242 of file bmesh_marking.cc.

References bm, BM_edge_select_set(), BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, BM_vert_select_set(), BM_VERTS_OF_MESH, BMLoop::e, e, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_FACE, SCE_SELECT_VERTEX, and v.

Referenced by BM_mesh_select_mode_clean(), and edbm_rip_invoke__edge().

BM_mesh_select_mode_flush()

void BM_mesh_select_mode_flush

(

BMesh *

bm

)

Definition at line 435 of file bmesh_marking.cc.

References bm, BM_mesh_select_mode_flush_ex(), and BM_SELECT_LEN_FLUSH_RECALC_ALL.

Referenced by BM_mesh_select_mode_set(), bmesh_edit_end(), bpy_bmesh_select_flush_mode(), ED_uvedit_select_sync_flush(), edbm_rip_edge_invoke(), knifeproject_exec(), uv_hide_exec(), uv_mouse_select_multi(), and uv_select_linked_multi().

bm_mesh_select_mode_flush_edge_to_face()

void bm_mesh_select_mode_flush_edge_to_face ( BMesh * bm )

static

Definition at line 394 of file bmesh_marking.cc.

References BLI_parallel_range_settings_defaults(), bm, BM_FACES_OF_MESH, bm_mesh_select_mode_flush_edge_to_face_iter_fn(), bm_mesh_select_mode_flush_reduce_fn(), BM_THREAD_LIMIT, SelectionFlushChunkData::delta_selection_len, TaskParallelSettings::func_reduce, TaskParallelSettings::use_threading, TaskParallelSettings::userdata_chunk, and TaskParallelSettings::userdata_chunk_size.

Referenced by BM_mesh_select_mode_flush_ex().

bm_mesh_select_mode_flush_edge_to_face_iter_fn()

void bm_mesh_select_mode_flush_edge_to_face_iter_fn ( void * , MempoolIterData * iter, const TaskParallelTLS *__restrict tls )

static

Definition at line 336 of file bmesh_marking.cc.

References BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, SelectionFlushChunkData::delta_selection_len, BMLoop::e, and BMLoop::next.

Referenced by bm_mesh_select_mode_flush_edge_to_face().

BM_mesh_select_mode_flush_ex()

void BM_mesh_select_mode_flush_ex	(	BMesh *	bm,
		short	selectmode,
		eBMSelectionFlushFLags	flags )

Select Mode Flush.

Makes sure to flush selections 'upwards' (ie: all verts of an edge selects the edge and so on). This should only be called by system and not tool authors.

Definition at line 410 of file bmesh_marking.cc.

References BLI_assert, bm, bm_mesh_select_mode_flush_edge_to_face(), bm_mesh_select_mode_flush_vert_to_edge(), BM_select_history_validate(), BM_SELECT_LEN_FLUSH_RECALC_EDGE, BM_SELECT_LEN_FLUSH_RECALC_FACE, BM_SELECT_LEN_FLUSH_RECALC_VERT, recount_totedgesel(), recount_totfacesel(), recount_totsels_are_ok(), recount_totvertsel(), SCE_SELECT_EDGE, and SCE_SELECT_VERTEX.

Referenced by BM_mesh_select_mode_flush(), edbm_bevel_calc(), EDBM_selectmode_flush_ex(), mesh_circle_select(), and view3d_circle_select_recalc().

bm_mesh_select_mode_flush_reduce_fn()

void bm_mesh_select_mode_flush_reduce_fn ( const void * __restrict, void *__restrict chunk_join, void *__restrict chunk )

static

Definition at line 369 of file bmesh_marking.cc.

References SelectionFlushChunkData::delta_selection_len.

Referenced by bm_mesh_select_mode_flush_edge_to_face(), and bm_mesh_select_mode_flush_vert_to_edge().

bm_mesh_select_mode_flush_vert_to_edge()

void bm_mesh_select_mode_flush_vert_to_edge ( BMesh * bm )

static

Definition at line 378 of file bmesh_marking.cc.

References BLI_parallel_range_settings_defaults(), bm, BM_EDGES_OF_MESH, bm_mesh_select_mode_flush_reduce_fn(), bm_mesh_select_mode_flush_vert_to_edge_iter_fn(), BM_THREAD_LIMIT, SelectionFlushChunkData::delta_selection_len, TaskParallelSettings::func_reduce, TaskParallelSettings::use_threading, TaskParallelSettings::userdata_chunk, and TaskParallelSettings::userdata_chunk_size.

Referenced by BM_mesh_select_mode_flush_ex().

bm_mesh_select_mode_flush_vert_to_edge_iter_fn()

void bm_mesh_select_mode_flush_vert_to_edge_iter_fn ( void * , MempoolIterData * iter, const TaskParallelTLS *__restrict tls )

static

Definition at line 315 of file bmesh_marking.cc.

References BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, SelectionFlushChunkData::delta_selection_len, and e.

Referenced by bm_mesh_select_mode_flush_vert_to_edge().

BM_mesh_select_mode_set()

void BM_mesh_select_mode_set	(	BMesh *	bm,
		int	selectmode )

Select Mode Set

Sets the selection mode for the bmesh, updating the selection state.

Definition at line 703 of file bmesh_marking.cc.

References bm, BM_edge_select_set(), BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_SELECT, BM_face_select_set(), BM_FACES_OF_MESH, BM_ITER_MESH, BM_mesh_select_mode_flush(), BM_VERTS_OF_MESH, SCE_SELECT_EDGE, SCE_SELECT_FACE, and SCE_SELECT_VERTEX.

BM_select_history_active_get()

bool BM_select_history_active_get	(	BMesh *	bm,
		struct BMEditSelection *	ese )

Get the active mesh element (with active-face fallback).

Definition at line 1121 of file bmesh_marking.cc.

References bm, BM_FACE, BM_mesh_active_face_get(), BMEditSelection::ele, BMEditSelection::htype, BMEditSelection::next, and BMEditSelection::prev.

Referenced by blender::ed::object::calc_active_center_for_editmode(), edbm_rip_invoke__vert(), blender::ed::transform::getTransformOrientation_ex(), and uv_map_transform_center().

BM_select_history_clear()

void BM_select_history_clear

(

BMesh *

bm

)

Definition at line 1104 of file bmesh_marking.cc.

References BLI_freelistN(), and bm.

Referenced by BM_mesh_bm_from_me(), BM_mesh_elem_hflag_disable_test(), BM_mesh_intersect(), BM_mesh_region_match(), BPy_BMEditSel_Assign(), bpy_bmeditselseq_clear(), ED_uvedit_active_edge_loop_set(), ED_uvedit_active_vert_loop_set(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_mod_weighted_strength_exec(), edbm_rip_edge_invoke(), edbm_solidify_exec(), and edbm_vert_connect_path_exec().

bm_select_history_create()

BMEditSelection * bm_select_history_create ( BMHeader * ele )

static

Definition at line 1038 of file bmesh_marking.cc.

References BMEditSelection::ele, BMEditSelection::htype, BMHeader::htype, and MEM_callocN().

Referenced by _bm_select_history_store_after_notest(), _bm_select_history_store_head_notest(), and _bm_select_history_store_notest().

BM_select_history_map_create()

GHash * BM_select_history_map_create

(

BMesh *

bm

)

Return a map from BMVert/BMEdge/BMFace -> BMEditSelection.

Definition at line 1157 of file bmesh_marking.cc.

References BLI_ghash_insert(), BLI_ghash_ptr_new(), BLI_listbase_is_empty(), bm, and LISTBASE_FOREACH.

Referenced by bmo_extrude_discrete_faces_exec(), and bmo_extrude_vert_indiv_exec().

BM_select_history_merge_from_targetmap()

void BM_select_history_merge_from_targetmap	(	BMesh *	bm,
		GHash *	vert_map,
		GHash *	edge_map,
		GHash *	face_map,
		bool	use_chain )

Map arguments may all be the same pointer.

Definition at line 1172 of file bmesh_marking.cc.

References _FLAG_OVERLAP, BLI_assert, BLI_freelinkN(), BLI_ghash_lookup(), bm, BM_EDGE, BM_ELEM_API_FLAG_DISABLE, BM_ELEM_API_FLAG_ENABLE, BM_ELEM_API_FLAG_TEST, BM_FACE, BM_VERT, BMESH_ASSERT, LISTBASE_FOREACH, and UNLIKELY.

Referenced by bmo_weld_verts_exec().

BM_select_history_validate()

void BM_select_history_validate

(

BMesh *

bm

)

Definition at line 1109 of file bmesh_marking.cc.

References BLI_freelinkN(), bm, BM_elem_flag_test, BM_ELEM_SELECT, BMEditSelection::ele, and BMEditSelection::next.

Referenced by BM_mesh_deselect_flush(), BM_mesh_select_mode_flush_ex(), bpy_bmeditselseq_validate(), ED_uvedit_select_sync_flush(), edbm_rip_invoke__edge(), uv_hide_exec(), and uv_mouse_select_multi().

BM_vert_hide_set()

void BM_vert_hide_set	(	BMVert *	v,
		const bool	hide )

Definition at line 1398 of file bmesh_marking.cc.

References BLI_assert, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_VERT, bmesh_disk_edge_next(), BMLoop::f, BMEdge::l, BMLoop::radial_next, and v.

Referenced by _bm_elem_hide_set().

bm_vert_is_edge_select_any_other()

bool bm_vert_is_edge_select_any_other ( const BMVert * v, const BMEdge * e_first )

static

Definition at line 154 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, bmesh_disk_edge_next(), and v.

Referenced by BM_edge_select_set(), and BM_face_select_set().

bm_vert_is_edge_visible_any()

bool bm_vert_is_edge_visible_any ( const BMVert * v )

static

Definition at line 183 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_HIDDEN, bmesh_disk_edge_next(), and v.

Referenced by vert_flush_hide_set().

BM_vert_select_set()

void BM_vert_select_set	(	BMesh *	bm,
		BMVert *	v,
		bool	select )

Select Vert.

Changes selection state of a single vertex in a mesh

Definition at line 516 of file bmesh_marking.cc.

References BLI_assert, bm, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_VERT, select, and v.

Referenced by _bm_elem_hide_set(), BM_edge_select_set(), BM_elem_select_set(), BM_face_select_set(), BM_mesh_bm_from_me(), BM_mesh_select_mode_clean_ex(), do_lasso_select_mesh__doSelectVert(), do_mesh_box_select__doSelectVert(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_verts(), edbm_dupli_extrude_cursor_invoke(), edbm_edge_split_selected_verts(), edbm_polybuild_face_at_cursor_invoke(), edbm_polybuild_split_at_cursor_invoke(), edbm_polybuild_transform_at_cursor_invoke(), edbm_rip_edge_invoke(), edbm_rip_invoke__vert(), edbm_select_axis_exec(), edbm_select_by_pole_count_exec(), edbm_select_linked_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), edbm_select_non_manifold_exec(), EDBM_select_pick(), edbm_select_random_exec(), EDBM_select_swap(), edbm_select_ungrouped_exec(), EDBM_selectmode_convert(), EDBM_selectmode_set(), mesh_circle_doSelectVert(), ringsel_finish(), blender::ed::object::select_editbmesh_hook(), similar_vert_select_exec(), TEST(), uv_hide_exec(), uvedit_edge_select_disable(), uvedit_edge_select_enable(), uvedit_uv_select_disable(), uvedit_uv_select_enable(), verttag_set_cb(), and blender::ed::object::vgroup_select_verts().

edge_flush_hide_set()

void edge_flush_hide_set ( BMEdge * e )

static

Hide unless any connected elements are visible. Run this after hiding a connected face.

Definition at line 1393 of file bmesh_marking.cc.

References bm_edge_is_face_visible_any(), BM_elem_flag_set, BM_ELEM_HIDDEN, and e.

Referenced by BM_face_hide_set().

recount_totedgesel()

void recount_totedgesel ( BMesh * bm )

static

Definition at line 122 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, and recount_totsel().

Referenced by BM_mesh_select_mode_flush_ex(), and recount_totsels().

recount_totfacesel()

void recount_totfacesel ( BMesh * bm )

static

Definition at line 127 of file bmesh_marking.cc.

References bm, BM_FACES_OF_MESH, and recount_totsel().

Referenced by BM_mesh_select_mode_flush_ex(), and recount_totsels().

recount_totsel()

int recount_totsel ( BMesh * bm, BMIterType iter_type )

static

Definition at line 99 of file bmesh_marking.cc.

References BLI_parallel_range_settings_defaults(), bm, count, TaskParallelSettings::func_reduce, TaskParallelSettings::min_iter_per_thread, recount_totsels_get_range_func(), recount_totsels_reduce(), TaskParallelSettings::userdata_chunk, and TaskParallelSettings::userdata_chunk_size.

Referenced by recount_totedgesel(), recount_totfacesel(), recount_totsels_are_ok(), and recount_totvertsel().

recount_totsels()

void recount_totsels ( BMesh * bm )

static

Definition at line 132 of file bmesh_marking.cc.

References bm, recount_totedgesel(), recount_totfacesel(), and recount_totvertsel().

Referenced by BM_mesh_deselect_flush(), and BM_mesh_select_flush().

recount_totsels_are_ok()

bool recount_totsels_are_ok ( BMesh * bm )

static

Definition at line 140 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, BM_FACES_OF_MESH, BM_VERTS_OF_MESH, and recount_totsel().

Referenced by BM_mesh_select_mode_flush_ex().

recount_totsels_get_range_func()

TaskParallelMempoolFunc recount_totsels_get_range_func ( BMIterType iter_type )

static

Definition at line 82 of file bmesh_marking.cc.

References BLI_assert, BM_EDGES_OF_MESH, BM_FACES_OF_MESH, BM_VERTS_OF_MESH, ELEM, recount_totsels_range_edge_func(), recount_totsels_range_face_func(), and recount_totsels_range_vert_func().

Referenced by recount_totsel().

recount_totsels_range_edge_func()

void recount_totsels_range_edge_func ( void * , MempoolIterData * iter, const TaskParallelTLS *__restrict tls )

static

Definition at line 51 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, and count.

Referenced by recount_totsels_get_range_func().

recount_totsels_range_face_func()

void recount_totsels_range_face_func ( void * , MempoolIterData * iter, const TaskParallelTLS *__restrict tls )

static

Definition at line 62 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, and count.

Referenced by recount_totsels_get_range_func().

recount_totsels_range_vert_func()

void recount_totsels_range_vert_func ( void * , MempoolIterData * iter, const TaskParallelTLS *__restrict tls )

static

Definition at line 40 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, and count.

Referenced by recount_totsels_get_range_func().

recount_totsels_reduce()

void recount_totsels_reduce ( const void * __restrict, void *__restrict chunk_join, void *__restrict chunk )

static

Definition at line 73 of file bmesh_marking.cc.

References SelectionCountChunkData::selection_len.

Referenced by recount_totsel().

recount_totvertsel()

void recount_totvertsel ( BMesh * bm )

static

Definition at line 117 of file bmesh_marking.cc.

References bm, BM_VERTS_OF_MESH, and recount_totsel().

Referenced by BM_mesh_select_mode_flush_ex(), and recount_totsels().

vert_flush_hide_set()

void vert_flush_hide_set ( BMVert * v )

static

Hide unless any connected elements are visible. Run this after hiding a connected edge or face.

Definition at line 1384 of file bmesh_marking.cc.

References BM_elem_flag_set, BM_ELEM_HIDDEN, bm_vert_is_edge_visible_any(), and v.

Referenced by BM_edge_hide_set(), and BM_face_hide_set().