|
PAPI
5.0.1.0
|
|
PAPI
5.0.1.0
|
Go to the source code of this file.
Functions | |
| int | main (int argc, char **argv) |
| int main | ( | int | argc, |
| char ** | argv | ||
| ) |
Definition at line 16 of file api.c.
{
const int NUM_COUNTERS = 1;
int Events[] = { PAPI_TOT_INS };
long long values[NUM_COUNTERS];
float rtime, ptime, ipc, mflips, mflops;
long long ins, flpins, flpops;
int retval;
tests_quiet( argc, argv );
retval = PAPI_library_init( PAPI_VER_CURRENT );
if ( retval != PAPI_VER_CURRENT )
test_fail( __FILE__, __LINE__, "PAPI_library_init", retval );
/****** High Level API ******/
if ( !TESTS_QUIET )
printf( "Testing PAPI_num_components... " );
/* get the number of components available on the system */
retval = PAPI_num_components( );
if ( !TESTS_QUIET ) printf( "%d\n", retval );
if ( retval == 0) {
if ( !TESTS_QUIET ) printf( "No components found, skipping high level tests\n");
}
else {
if ( !TESTS_QUIET ) printf( "Testing PAPI_num_counters... " );
/* get the number of hardware counters available on the system */
retval = PAPI_num_counters( );
if ( retval != PAPI_get_cmp_opt( PAPI_MAX_HWCTRS, NULL, 0 ) )
test_fail_exit( __FILE__, __LINE__, "PAPI_num_counters", retval );
else if ( !TESTS_QUIET ) printf( "%d\n", retval );
if ( !TESTS_QUIET ) printf( "Testing PAPI_start_counters... " );
retval = PAPI_start_counters( NULL, NUM_COUNTERS ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_start_counters", retval );
retval = PAPI_start_counters( Events, 0 ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_start_counters", retval );
retval = PAPI_start_counters( Events, NUM_COUNTERS ); // start counting hardware events
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_start_counters", retval );
else if ( !TESTS_QUIET )
printf( "started PAPI_TOT_INS\n" );
if ( !TESTS_QUIET )
printf( "Testing PAPI_stop_counters... " );
retval = PAPI_stop_counters( NULL, NUM_COUNTERS ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_stop_counters", retval );
retval = PAPI_stop_counters( values, 0 ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_stop_counters", retval );
retval = PAPI_stop_counters( values, NUM_COUNTERS ); // stop counters and return current counts
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_stop_counters", retval );
else if ( !TESTS_QUIET )
printf( "stopped counting PAPI_TOT_INS\n" );
//NOTE: There are currently no checks on whether or not counter values are correct
retval = PAPI_start_counters( Events, NUM_COUNTERS ); // start counting hardware events again
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_start_counters", retval );
if ( !TESTS_QUIET )
printf( "Testing PAPI_read_counters... " );
retval = PAPI_read_counters( NULL, NUM_COUNTERS ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_read_counters", retval );
retval = PAPI_read_counters( values, 0 ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_read_counters", retval );
retval = PAPI_read_counters( values, NUM_COUNTERS ); // copy current counts to array and reset counters
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_read_counters", retval );
else if ( !TESTS_QUIET )
printf( "read PAPI_TOT_INS counts and reset counter\n" );
//NOTE: There are currently no checks on whether or not counter values are correct
if ( !TESTS_QUIET )
printf( "Testing PAPI_accum_counters... " );
retval = PAPI_accum_counters( NULL, NUM_COUNTERS ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_accum_counters", retval );
retval = PAPI_accum_counters( values, 0 ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_accum_counters", retval );
retval = PAPI_accum_counters( values, NUM_COUNTERS ); // add current counts to array and reset counters
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_accum_counters", retval );
else if ( !TESTS_QUIET )
printf( "added PAPI_TOT_INS counts and reset counter\n" );
//NOTE: There are currently no checks on whether or not counter values are correct
retval = PAPI_stop_counters( values, NUM_COUNTERS ); // stop counting hardware events
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_stop_counters", retval );
if ( !TESTS_QUIET )
printf( "Testing PAPI_ipc... " );
retval = PAPI_ipc( NULL, &ptime, &ins, &ipc ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_ipc", retval );
retval = PAPI_ipc( &rtime, NULL, &ins, &ipc ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_ipc", retval );
retval = PAPI_ipc( &rtime, &ptime, NULL, &ipc ); // pass invalid 3rd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_ipc", retval );
retval = PAPI_ipc( &rtime, &ptime, &ins, NULL ); // pass invalid 4th argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_ipc", retval );
retval = PAPI_ipc( &rtime, &ptime, &ins, &ipc ); // get instructions per cycle, real and processor time
if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_ipc", retval );
else if ( !TESTS_QUIET )
printf( "got instructions per cycle, real and processor time\n" );
//NOTE: There are currently no checks on whether or not returned values are correct
//NOTE: PAPI_flips and PAPI_flops fail if any other low-level calls have been made!
PAPI_shutdown( );
retval = PAPI_library_init( PAPI_VER_CURRENT );
if ( retval != PAPI_VER_CURRENT )
test_fail( __FILE__, __LINE__, "PAPI_library_init", retval );
if ( !TESTS_QUIET )
printf( "Testing PAPI_flips... " );
retval = PAPI_flips( NULL, &ptime, &flpins, &mflips ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flips", retval );
retval = PAPI_flips( &rtime, NULL, &flpins, &mflips ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flips", retval );
retval = PAPI_flips( &rtime, &ptime, NULL, &mflips ); // pass invalid 3rd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flips", retval );
retval = PAPI_flips( &rtime, &ptime, &flpins, NULL ); // pass invalid 4th argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flips", retval );
retval = PAPI_flips( &rtime, &ptime, &flpins, &mflips ); // get Mflips/s, real and processor time
if ( retval == PAPI_ENOEVNT )
test_warn( __FILE__, __LINE__, "PAPI_flips", retval);
else if ( retval != PAPI_OK )
test_fail_exit( __FILE__, __LINE__, "PAPI_flips", retval );
else if ( !TESTS_QUIET )
printf( "got Mflips/s, real and processor time\n" );
//NOTE: There are currently no checks on whether or not returned values are correct
PAPI_shutdown( );
retval = PAPI_library_init( PAPI_VER_CURRENT );
if ( retval != PAPI_VER_CURRENT )
test_fail( __FILE__, __LINE__, "PAPI_library_init", retval );
if ( !TESTS_QUIET )
printf( "Testing PAPI_flops... " );
retval = PAPI_flops( NULL, &ptime, &flpops, &mflops ); // pass invalid 1st argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flops", retval );
retval = PAPI_flops( &rtime, NULL, &flpops, &mflops ); // pass invalid 2nd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flops", retval );
retval = PAPI_flops( &rtime, &ptime, NULL, &mflops ); // pass invalid 3rd argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flops", retval );
retval = PAPI_flops( &rtime, &ptime, &flpops, NULL ); // pass invalid 4th argument
if ( retval != PAPI_EINVAL )
test_fail_exit( __FILE__, __LINE__, "PAPI_flops", retval );
retval = PAPI_flops( &rtime, &ptime, &flpops, &mflops ); // get Mflops/s, real and processor time
if ( retval == PAPI_ENOEVNT )
test_warn( __FILE__, __LINE__, "PAPI_flops", retval);
else if ( retval != PAPI_OK ) {
test_fail_exit( __FILE__, __LINE__, "PAPI_flops", retval ); }
else if ( !TESTS_QUIET ) {
printf( "got Mflops/s, real and processor time\n" ); }
//NOTE: There are currently no checks on whether or not returned values are correct
}
/***************************/
/****** Low Level API ******/
/***************************/
/*
int PAPI_accum(int EventSet, long long * values); // accumulate and reset hardware events from an event set
int PAPI_add_event(int EventSet, int Event); // add single PAPI preset or native hardware event to an event set
int PAPI_add_events(int EventSet, int *Events, int number); // add array of PAPI preset or native hardware events to an event set
int PAPI_assign_eventset_component(int EventSet, int cidx); // assign a component index to an existing but empty eventset
int PAPI_attach(int EventSet, unsigned long tid); // attach specified event set to a specific process or thread id
int PAPI_cleanup_eventset(int EventSet); // remove all PAPI events from an event set
int PAPI_create_eventset(int *EventSet); // create a new empty PAPI event set
int PAPI_detach(int EventSet); // detach specified event set from a previously specified process or thread id
int PAPI_destroy_eventset(int *EventSet); // deallocates memory associated with an empty PAPI event set
int PAPI_enum_event(int *EventCode, int modifier); // return the event code for the next available preset or natvie event
int PAPI_event_code_to_name(int EventCode, char *out); // translate an integer PAPI event code into an ASCII PAPI preset or native name
int PAPI_event_name_to_code(char *in, int *out); // translate an ASCII PAPI preset or native name into an integer PAPI event code
int PAPI_get_dmem_info(PAPI_dmem_info_t *dest); // get dynamic memory usage information
int PAPI_get_event_info(int EventCode, PAPI_event_info_t * info); // get the name and descriptions for a given preset or native event code
const PAPI_exe_info_t *PAPI_get_executable_info(void); // get the executable's address space information
const PAPI_hw_info_t *PAPI_get_hardware_info(void); // get information about the system hardware
const PAPI_component_info_t *PAPI_get_component_info(int cidx); // get information about the component features
int PAPI_get_multiplex(int EventSet); // get the multiplexing status of specified event set
int PAPI_get_opt(int option, PAPI_option_t * ptr); // query the option settings of the PAPI library or a specific event set
int PAPI_get_cmp_opt(int option, PAPI_option_t * ptr,int cidx); // query the component specific option settings of a specific event set
long long PAPI_get_real_cyc(void); // return the total number of cycles since some arbitrary starting point
long long PAPI_get_real_nsec(void); // return the total number of nanoseconds since some arbitrary starting point
long long PAPI_get_real_usec(void); // return the total number of microseconds since some arbitrary starting point
const PAPI_shlib_info_t *PAPI_get_shared_lib_info(void); // get information about the shared libraries used by the process
int PAPI_get_thr_specific(int tag, void **ptr); // return a pointer to a thread specific stored data structure
int PAPI_get_overflow_event_index(int Eventset, long long overflow_vector, int *array, int *number); // # decomposes an overflow_vector into an event index array
long long PAPI_get_virt_cyc(void); // return the process cycles since some arbitrary starting point
long long PAPI_get_virt_nsec(void); // return the process nanoseconds since some arbitrary starting point
long long PAPI_get_virt_usec(void); // return the process microseconds since some arbitrary starting point
int PAPI_is_initialized(void); // return the initialized state of the PAPI library
int PAPI_library_init(int version); // initialize the PAPI library
int PAPI_list_events(int EventSet, int *Events, int *number); // list the events that are members of an event set
int PAPI_list_threads(unsigned long *tids, int *number); // list the thread ids currently known to PAPI
int PAPI_lock(int); // lock one of two PAPI internal user mutex variables
int PAPI_multiplex_init(void); // initialize multiplex support in the PAPI library
int PAPI_num_hwctrs(void); // return the number of hardware counters for the cpu
int PAPI_num_cmp_hwctrs(int cidx); // return the number of hardware counters for a specified component
int PAPI_num_hwctrs(void); // for backward compatibility
int PAPI_num_events(int EventSet); // return the number of events in an event set
int PAPI_overflow(int EventSet, int EventCode, int threshold,
int flags, PAPI_overflow_handler_t handler); // set up an event set to begin registering overflows
int PAPI_perror( char *msg); // convert PAPI error codes to strings
int PAPI_profil(void *buf, unsigned bufsiz, caddr_t offset,
unsigned scale, int EventSet, int EventCode,
int threshold, int flags); // generate PC histogram data where hardware counter overflow occurs
int PAPI_query_event(int EventCode); // query if a PAPI event exists
int PAPI_read(int EventSet, long long * values); // read hardware events from an event set with no reset
int PAPI_read_ts(int EventSet, long long * values, long long *cyc);
int PAPI_register_thread(void); // inform PAPI of the existence of a new thread
int PAPI_remove_event(int EventSet, int EventCode); // remove a hardware event from a PAPI event set
int PAPI_remove_events(int EventSet, int *Events, int number); // remove an array of hardware events from a PAPI event set
int PAPI_reset(int EventSet); // reset the hardware event counts in an event set
int PAPI_set_debug(int level); // set the current debug level for PAPI
int PAPI_set_cmp_domain(int domain, int cidx); // set the component specific default execution domain for new event sets
int PAPI_set_domain(int domain); // set the default execution domain for new event sets
int PAPI_set_cmp_granularity(int granularity, int cidx); // set the component specific default granularity for new event sets
int PAPI_set_granularity(int granularity); //set the default granularity for new event sets
int PAPI_set_multiplex(int EventSet); // convert a standard event set to a multiplexed event set
int PAPI_set_opt(int option, PAPI_option_t * ptr); // change the option settings of the PAPI library or a specific event set
int PAPI_set_thr_specific(int tag, void *ptr); // save a pointer as a thread specific stored data structure
void PAPI_shutdown(void); // finish using PAPI and free all related resources
int PAPI_sprofil(PAPI_sprofil_t * prof, int profcnt, int EventSet, int EventCode, int threshold, int flags); // generate hardware counter profiles from multiple code regions
int PAPI_start(int EventSet); // start counting hardware events in an event set
int PAPI_state(int EventSet, int *status); // return the counting state of an event set
int PAPI_stop(int EventSet, long long * values); // stop counting hardware events in an event set and return current events
char *PAPI_strerror(int); // return a pointer to the error message corresponding to a specified error code
unsigned long PAPI_thread_id(void); // get the thread identifier of the current thread
int PAPI_thread_init(unsigned long (*id_fn) (void)); // initialize thread support in the PAPI library
int PAPI_unlock(int); // unlock one of two PAPI internal user mutex variables
int PAPI_unregister_thread(void); // inform PAPI that a previously registered thread is disappearing
int PAPI_write(int EventSet, long long * values); // write counter values into counters
*/
test_pass( __FILE__, NULL, 0 );
exit( 1 );
}
1.7.6.1