Translate between signed linear and Speex (Open Codec) More...

#include "asterisk.h"
#include <speex/speex.h>
#include "asterisk/translate.h"
#include "asterisk/module.h"
#include "asterisk/config.h"
#include "asterisk/utils.h"
#include "asterisk/slin.h"
#include "ex_speex.h"

Include dependency graph for codec_speex.c:

Go to the source code of this file.

Data Structures
struct	speex_coder_pvt
Defines
#define	BUFFER_SAMPLES 8000
#define	SPEEX_SAMPLES 160
#define	TYPE_HIGH 0x0
#define	TYPE_LOW 0x1
#define	TYPE_MASK 0x3
#define	TYPE_SILENCE 0x2
Functions
static void	__reg_module (void)
static void	__unreg_module (void)
static int	lin16tospeexwb_new (struct ast_trans_pvt *pvt)
static void	lintospeex_destroy (struct ast_trans_pvt *arg)
static int	lintospeex_framein (struct ast_trans_pvt pvt, struct ast_frame f)
	store input frame in work buffer
static struct ast_frame *	lintospeex_frameout (struct ast_trans_pvt *pvt)
	convert work buffer and produce output frame
static int	lintospeex_new (struct ast_trans_pvt *pvt)
static int	load_module (void)
static int	parse_config (int reload)
static int	reload (void)
static int	speex_decoder_construct (struct ast_trans_pvt pvt, const SpeexMode profile)
static int	speex_encoder_construct (struct ast_trans_pvt pvt, const SpeexMode profile, int sampling_rate)
static void	speextolin_destroy (struct ast_trans_pvt *arg)
static int	speextolin_framein (struct ast_trans_pvt pvt, struct ast_frame f)
	convert and store into outbuf
static int	speextolin_new (struct ast_trans_pvt *pvt)
static int	speexwbtolin16_new (struct ast_trans_pvt *pvt)
static int	unload_module (void)
Variables
static struct ast_module_info	__mod_info = { .name = AST_MODULE, .flags = AST_MODFLAG_DEFAULT , .description = "Speex Coder/Decoder" , .key = "This paragraph is copyright (c) 2006 by Digium, Inc. \In order for your module to load, it must return this \key via a function called \"key\". Any code which \includes this paragraph must be licensed under the GNU \General Public License version 2 or later (at your \option). In addition to Digium's general reservations \of rights, Digium expressly reserves the right to \allow other parties to license this paragraph under \different terms. Any use of Digium, Inc. trademarks or \logos (including \"Asterisk\" or \"Digium\") without \express written permission of Digium, Inc. is prohibited.\n" , .buildopt_sum = AST_BUILDOPT_SUM, .load = load_module, .unload = unload_module, .reload = reload, }
static int	abr = 0
static struct ast_module_info *	ast_module_info = &__mod_info
static int	complexity = 2
static int	dtx = 0
static int	enhancement = 0
static struct ast_translator	lin16tospeexwb
static struct ast_translator	lintospeex
static int	pp_agc = 0
static float	pp_agc_level = 8000
static int	pp_denoise = 0
static int	pp_dereverb = 0
static float	pp_dereverb_decay = 0.4
static float	pp_dereverb_level = 0.3
static int	pp_vad = 0
static int	preproc = 0
static int	quality = 3
static struct ast_translator	speextolin
static struct ast_translator	speexwbtolin16
static int	vad = 0
static int	vbr = 0
static float	vbr_quality = 4

Detailed Description

Translate between signed linear and Speex (Open Codec)

Note:: This work was motivated by Jeremy McNamara hacked to be configurable by anthm and bkw 9/28/2004

ExtRef:: The Speex library - http://www.speex.org

Definition in file codec_speex.c.

Define Documentation

#define BUFFER_SAMPLES 8000

Definition at line 81 of file codec_speex.c.

Referenced by speextolin_framein().

#define SPEEX_SAMPLES 160

Definition at line 82 of file codec_speex.c.

Referenced by speex16_sample(), and speex_sample().

#define TYPE_HIGH 0x0

Definition at line 77 of file codec_speex.c.

#define TYPE_LOW 0x1

Definition at line 78 of file codec_speex.c.

#define TYPE_MASK 0x3

Definition at line 79 of file codec_speex.c.

#define TYPE_SILENCE 0x2

Definition at line 76 of file codec_speex.c.

Function Documentation

static void __reg_module ( void ) [static]

Definition at line 521 of file codec_speex.c.

static void __unreg_module ( void ) [static]

Definition at line 521 of file codec_speex.c.

static int lin16tospeexwb_new ( struct ast_trans_pvt * pvt ) [static]

Definition at line 147 of file codec_speex.c.

References speex_encoder_construct().

{
   return speex_encoder_construct(pvt, &speex_wb_mode, 16000);
}

static void lintospeex_destroy ( struct ast_trans_pvt * arg ) [static]

Definition at line 321 of file codec_speex.c.

References speex_coder_pvt::bits, ast_trans_pvt::pvt, and speex_coder_pvt::speex.

{
   struct speex_coder_pvt *pvt = arg->pvt;
#ifdef _SPEEX_TYPES_H
   if (preproc)
      speex_preprocess_state_destroy(pvt->pp);
#endif
   speex_encoder_destroy(pvt->speex);
   speex_bits_destroy(&pvt->bits);
}

static int lintospeex_framein	(	struct ast_trans_pvt *	pvt,
		struct ast_frame *	f
	)		`[static]`

store input frame in work buffer

Definition at line 235 of file codec_speex.c.

References speex_coder_pvt::buf, ast_frame::data, ast_frame::datalen, ast_frame::ptr, ast_trans_pvt::pvt, ast_trans_pvt::samples, and ast_frame::samples.

{
   struct speex_coder_pvt *tmp = pvt->pvt;

   /* XXX We should look at how old the rest of our stream is, and if it
      is too old, then we should overwrite it entirely, otherwise we can
      get artifacts of earlier talk that do not belong */
   memcpy(tmp->buf + pvt->samples, f->data.ptr, f->datalen);
   pvt->samples += f->samples;
   return 0;
}

static struct ast_frame* lintospeex_frameout ( struct ast_trans_pvt * pvt ) [static, read]

convert work buffer and produce output frame

Definition at line 248 of file codec_speex.c.

References AST_FRAME_CNG, ast_trans_frameout(), speex_coder_pvt::bits, speex_coder_pvt::buf, ast_translator::buf_size, ast_trans_pvt::c, dtx, ast_trans_pvt::f, speex_coder_pvt::framesize, ast_frame::frametype, ast_trans_pvt::outbuf, ast_trans_pvt::pvt, ast_trans_pvt::samples, ast_frame::samples, speex_coder_pvt::silent_state, speex_coder_pvt::speex, and ast_trans_pvt::t.

{
   struct speex_coder_pvt *tmp = pvt->pvt;
   int is_speech=1;
   int datalen = 0;  /* output bytes */
   int samples = 0;  /* output samples */

   /* We can't work on anything less than a frame in size */
   if (pvt->samples < tmp->framesize)
      return NULL;
   speex_bits_reset(&tmp->bits);
   while (pvt->samples >= tmp->framesize) {
#ifdef _SPEEX_TYPES_H
      /* Preprocess audio */
      if (preproc)
         is_speech = speex_preprocess(tmp->pp, tmp->buf + samples, NULL);
      /* Encode a frame of data */
      if (is_speech) {
         /* If DTX enabled speex_encode returns 0 during silence */
         is_speech = speex_encode_int(tmp->speex, tmp->buf + samples, &tmp->bits) || !dtx;
      } else {
         /* 5 zeros interpreted by Speex as silence (submode 0) */
         speex_bits_pack(&tmp->bits, 0, 5);
      }
#else
      {
         float fbuf[1024];
         int x;
         /* Convert to floating point */
         for (x = 0; x < tmp->framesize; x++)
            fbuf[x] = tmp->buf[samples + x];
         /* Encode a frame of data */
         is_speech = speex_encode(tmp->speex, fbuf, &tmp->bits) || !dtx;
      }
#endif
      samples += tmp->framesize;
      pvt->samples -= tmp->framesize;
   }

   /* Move the data at the end of the buffer to the front */
   if (pvt->samples)
      memmove(tmp->buf, tmp->buf + samples, pvt->samples * 2);

   /* Use AST_FRAME_CNG to signify the start of any silence period */
   if (is_speech) {
      tmp->silent_state = 0;
   } else {
      if (tmp->silent_state) {
         return NULL;
      } else {
         tmp->silent_state = 1;
         speex_bits_reset(&tmp->bits);
         memset(&pvt->f, 0, sizeof(pvt->f));
         pvt->f.frametype = AST_FRAME_CNG;
         pvt->f.samples = samples;
         /* XXX what now ? format etc... */
      }
   }

   /* Terminate bit stream */
   speex_bits_pack(&tmp->bits, 15, 5);
   datalen = speex_bits_write(&tmp->bits, pvt->outbuf.c, pvt->t->buf_size);
   return ast_trans_frameout(pvt, datalen, samples);
}

static int lintospeex_new ( struct ast_trans_pvt * pvt ) [static]

Definition at line 142 of file codec_speex.c.

References speex_encoder_construct().

{
   return speex_encoder_construct(pvt, &speex_nb_mode, 8000);
}

static int load_module ( void ) [static]

Definition at line 502 of file codec_speex.c.

References AST_MODULE_LOAD_DECLINE, ast_register_translator, and parse_config().

{
   int res = 0;

   if (parse_config(0))
      return AST_MODULE_LOAD_DECLINE;

   res |= ast_register_translator(&speextolin);
   res |= ast_register_translator(&lintospeex);
   res |= ast_register_translator(&speexwbtolin16);
   res |= ast_register_translator(&lin16tospeexwb);

   return res;
}

static int parse_config ( int reload ) [static]

Definition at line 388 of file codec_speex.c.

References ast_config_destroy(), ast_config_load, ast_log(), ast_true(), ast_variable_browse(), ast_verb, CONFIG_FLAG_FILEUNCHANGED, CONFIG_STATUS_FILEINVALID, CONFIG_STATUS_FILEMISSING, CONFIG_STATUS_FILEUNCHANGED, LOG_ERROR, ast_variable::name, ast_variable::next, ast_variable::value, and var.

Referenced by load_module(), and reload().

{
   struct ast_flags config_flags = { reload ? CONFIG_FLAG_FILEUNCHANGED : 0 };
   struct ast_config *cfg = ast_config_load("codecs.conf", config_flags);
   struct ast_variable *var;
   int res;
   float res_f;

   if (cfg == CONFIG_STATUS_FILEMISSING || cfg == CONFIG_STATUS_FILEUNCHANGED || cfg == CONFIG_STATUS_FILEINVALID)
      return 0;

   for (var = ast_variable_browse(cfg, "speex"); var; var = var->next) {
      if (!strcasecmp(var->name, "quality")) {
         res = abs(atoi(var->value));
         if (res > -1 && res < 11) {
            ast_verb(3, "CODEC SPEEX: Setting Quality to %d\n",res);
            quality = res;
         } else 
            ast_log(LOG_ERROR,"Error Quality must be 0-10\n");
      } else if (!strcasecmp(var->name, "complexity")) {
         res = abs(atoi(var->value));
         if (res > -1 && res < 11) {
            ast_verb(3, "CODEC SPEEX: Setting Complexity to %d\n",res);
            complexity = res;
         } else 
            ast_log(LOG_ERROR,"Error! Complexity must be 0-10\n");
      } else if (!strcasecmp(var->name, "vbr_quality")) {
         if (sscanf(var->value, "%30f", &res_f) == 1 && res_f >= 0 && res_f <= 10) {
            ast_verb(3, "CODEC SPEEX: Setting VBR Quality to %f\n",res_f);
            vbr_quality = res_f;
         } else
            ast_log(LOG_ERROR,"Error! VBR Quality must be 0-10\n");
      } else if (!strcasecmp(var->name, "abr_quality")) {
         ast_log(LOG_ERROR,"Error! ABR Quality setting obsolete, set ABR to desired bitrate\n");
      } else if (!strcasecmp(var->name, "enhancement")) {
         enhancement = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Perceptual Enhancement Mode. [%s]\n",enhancement ? "on" : "off");
      } else if (!strcasecmp(var->name, "vbr")) {
         vbr = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: VBR Mode. [%s]\n",vbr ? "on" : "off");
      } else if (!strcasecmp(var->name, "abr")) {
         res = abs(atoi(var->value));
         if (res >= 0) {
               if (res > 0)
               ast_verb(3, "CODEC SPEEX: Setting ABR target bitrate to %d\n",res);
               else
               ast_verb(3, "CODEC SPEEX: Disabling ABR\n");
            abr = res;
         } else 
            ast_log(LOG_ERROR,"Error! ABR target bitrate must be >= 0\n");
      } else if (!strcasecmp(var->name, "vad")) {
         vad = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: VAD Mode. [%s]\n",vad ? "on" : "off");
      } else if (!strcasecmp(var->name, "dtx")) {
         dtx = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: DTX Mode. [%s]\n",dtx ? "on" : "off");
      } else if (!strcasecmp(var->name, "preprocess")) {
         preproc = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Preprocessing. [%s]\n",preproc ? "on" : "off");
      } else if (!strcasecmp(var->name, "pp_vad")) {
         pp_vad = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Preprocessor VAD. [%s]\n",pp_vad ? "on" : "off");
      } else if (!strcasecmp(var->name, "pp_agc")) {
         pp_agc = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Preprocessor AGC. [%s]\n",pp_agc ? "on" : "off");
      } else if (!strcasecmp(var->name, "pp_agc_level")) {
         if (sscanf(var->value, "%30f", &res_f) == 1 && res_f >= 0) {
            ast_verb(3, "CODEC SPEEX: Setting preprocessor AGC Level to %f\n",res_f);
            pp_agc_level = res_f;
         } else
            ast_log(LOG_ERROR,"Error! Preprocessor AGC Level must be >= 0\n");
      } else if (!strcasecmp(var->name, "pp_denoise")) {
         pp_denoise = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Preprocessor Denoise. [%s]\n",pp_denoise ? "on" : "off");
      } else if (!strcasecmp(var->name, "pp_dereverb")) {
         pp_dereverb = ast_true(var->value) ? 1 : 0;
         ast_verb(3, "CODEC SPEEX: Preprocessor Dereverb. [%s]\n",pp_dereverb ? "on" : "off");
      } else if (!strcasecmp(var->name, "pp_dereverb_decay")) {
         if (sscanf(var->value, "%30f", &res_f) == 1 && res_f >= 0) {
            ast_verb(3, "CODEC SPEEX: Setting preprocessor Dereverb Decay to %f\n",res_f);
            pp_dereverb_decay = res_f;
         } else
            ast_log(LOG_ERROR,"Error! Preprocessor Dereverb Decay must be >= 0\n");
      } else if (!strcasecmp(var->name, "pp_dereverb_level")) {
         if (sscanf(var->value, "%30f", &res_f) == 1 && res_f >= 0) {
            ast_verb(3, "CODEC SPEEX: Setting preprocessor Dereverb Level to %f\n",res_f);
            pp_dereverb_level = res_f;
         } else
            ast_log(LOG_ERROR,"Error! Preprocessor Dereverb Level must be >= 0\n");
      }
   }
   ast_config_destroy(cfg);
   return 0;
}

static int reload ( void ) [static]

Definition at line 483 of file codec_speex.c.

References AST_MODULE_LOAD_DECLINE, AST_MODULE_LOAD_SUCCESS, and parse_config().

{
   if (parse_config(1))
      return AST_MODULE_LOAD_DECLINE;
   return AST_MODULE_LOAD_SUCCESS;
}

static int speex_decoder_construct	(	struct ast_trans_pvt *	pvt,
		const SpeexMode *	profile
	)		`[static]`

Definition at line 152 of file codec_speex.c.

References speex_coder_pvt::bits, speex_coder_pvt::framesize, ast_trans_pvt::pvt, and speex_coder_pvt::speex.

Referenced by speextolin_new(), and speexwbtolin16_new().

{
   struct speex_coder_pvt *tmp = pvt->pvt;
   
   if (!(tmp->speex = speex_decoder_init(profile)))
      return -1;

   speex_bits_init(&tmp->bits);
   speex_decoder_ctl(tmp->speex, SPEEX_GET_FRAME_SIZE, &tmp->framesize);
   if (enhancement)
      speex_decoder_ctl(tmp->speex, SPEEX_SET_ENH, &enhancement);

   return 0;
}

static int speex_encoder_construct	(	struct ast_trans_pvt *	pvt,
		const SpeexMode *	profile,
		int	sampling_rate
	)		`[static]`

Definition at line 101 of file codec_speex.c.

References speex_coder_pvt::bits, speex_coder_pvt::framesize, ast_trans_pvt::pvt, speex_coder_pvt::silent_state, and speex_coder_pvt::speex.

Referenced by lin16tospeexwb_new(), and lintospeex_new().

{
   struct speex_coder_pvt *tmp = pvt->pvt;

   if (!(tmp->speex = speex_encoder_init(profile)))
      return -1;

   speex_bits_init(&tmp->bits);
   speex_bits_reset(&tmp->bits);
   speex_encoder_ctl(tmp->speex, SPEEX_GET_FRAME_SIZE, &tmp->framesize);
   speex_encoder_ctl(tmp->speex, SPEEX_SET_COMPLEXITY, &complexity);
#ifdef _SPEEX_TYPES_H
   if (preproc) {
      tmp->pp = speex_preprocess_state_init(tmp->framesize, sampling_rate);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_VAD, &pp_vad);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_AGC, &pp_agc);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_AGC_LEVEL, &pp_agc_level);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_DENOISE, &pp_denoise);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_DEREVERB, &pp_dereverb);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_DEREVERB_DECAY, &pp_dereverb_decay);
      speex_preprocess_ctl(tmp->pp, SPEEX_PREPROCESS_SET_DEREVERB_LEVEL, &pp_dereverb_level);
   }
#endif
   if (!abr && !vbr) {
      speex_encoder_ctl(tmp->speex, SPEEX_SET_QUALITY, &quality);
      if (vad)
         speex_encoder_ctl(tmp->speex, SPEEX_SET_VAD, &vad);
   }
   if (vbr) {
      speex_encoder_ctl(tmp->speex, SPEEX_SET_VBR, &vbr);
      speex_encoder_ctl(tmp->speex, SPEEX_SET_VBR_QUALITY, &vbr_quality);
   }
   if (abr)
      speex_encoder_ctl(tmp->speex, SPEEX_SET_ABR, &abr);
   if (dtx)
      speex_encoder_ctl(tmp->speex, SPEEX_SET_DTX, &dtx); 
   tmp->silent_state = 0;

   return 0;
}

static void speextolin_destroy ( struct ast_trans_pvt * arg ) [static]

Definition at line 313 of file codec_speex.c.

References speex_coder_pvt::bits, ast_trans_pvt::pvt, and speex_coder_pvt::speex.

{
   struct speex_coder_pvt *pvt = arg->pvt;

   speex_decoder_destroy(pvt->speex);
   speex_bits_destroy(&pvt->bits);
}

static int speextolin_framein	(	struct ast_trans_pvt *	pvt,
		struct ast_frame *	f
	)		`[static]`

convert and store into outbuf

Definition at line 178 of file codec_speex.c.

References ast_log(), speex_coder_pvt::bits, BUFFER_SAMPLES, ast_frame::data, ast_trans_pvt::datalen, ast_frame::datalen, speex_coder_pvt::framesize, ast_trans_pvt::i16, LOG_WARNING, ast_trans_pvt::outbuf, ast_frame::ptr, ast_trans_pvt::pvt, ast_trans_pvt::samples, and speex_coder_pvt::speex.

{
   struct speex_coder_pvt *tmp = pvt->pvt;

   /* Assuming there's space left, decode into the current buffer at
      the tail location.  Read in as many frames as there are */
   int x;
   int res;
   int16_t *dst = pvt->outbuf.i16;
   /* XXX fout is a temporary buffer, may have different types */
#ifdef _SPEEX_TYPES_H
   spx_int16_t fout[1024];
#else
   float fout[1024];
#endif

   if (f->datalen == 0) {  /* Native PLC interpolation */
      if (pvt->samples + tmp->framesize > BUFFER_SAMPLES) {
         ast_log(LOG_WARNING, "Out of buffer space\n");
         return -1;
      }
#ifdef _SPEEX_TYPES_H
      speex_decode_int(tmp->speex, NULL, dst + pvt->samples);
#else
      speex_decode(tmp->speex, NULL, fout);
      for (x=0;x<tmp->framesize;x++) {
         dst[pvt->samples + x] = (int16_t)fout[x];
      }
#endif
      pvt->samples += tmp->framesize;
      pvt->datalen += 2 * tmp->framesize; /* 2 bytes/sample */
      return 0;
   }

   /* Read in bits */
   speex_bits_read_from(&tmp->bits, f->data.ptr, f->datalen);
   for (;;) {
#ifdef _SPEEX_TYPES_H
      res = speex_decode_int(tmp->speex, &tmp->bits, fout);
#else
      res = speex_decode(tmp->speex, &tmp->bits, fout);
#endif
      if (res < 0)
         break;
      if (pvt->samples + tmp->framesize > BUFFER_SAMPLES) {
         ast_log(LOG_WARNING, "Out of buffer space\n");
         return -1;
      }
      for (x = 0 ; x < tmp->framesize; x++)
         dst[pvt->samples + x] = (int16_t)fout[x];
      pvt->samples += tmp->framesize;
      pvt->datalen += 2 * tmp->framesize; /* 2 bytes/sample */
   }
   return 0;
}

static int speextolin_new ( struct ast_trans_pvt * pvt ) [static]

Definition at line 167 of file codec_speex.c.

References speex_decoder_construct().

{
   return speex_decoder_construct(pvt, &speex_nb_mode);
}

static int speexwbtolin16_new ( struct ast_trans_pvt * pvt ) [static]

Definition at line 172 of file codec_speex.c.

References speex_decoder_construct().

{
   return speex_decoder_construct(pvt, &speex_wb_mode);
}

static int unload_module ( void ) [static]

Definition at line 490 of file codec_speex.c.

References ast_unregister_translator().

{
   int res = 0;

   res |= ast_unregister_translator(&speextolin);
   res |= ast_unregister_translator(&lintospeex);
   res |= ast_unregister_translator(&speexwbtolin16);
   res |= ast_unregister_translator(&lin16tospeexwb);

   return res;
}

Variable Documentation

struct ast_module_info __mod_info = { .name = AST_MODULE, .flags = AST_MODFLAG_DEFAULT , .description = "Speex Coder/Decoder" , .key = "This paragraph is copyright (c) 2006 by Digium, Inc. \In order for your module to load, it must return this \key via a function called \"key\". Any code which \includes this paragraph must be licensed under the GNU \General Public License version 2 or later (at your \option). In addition to Digium's general reservations \of rights, Digium expressly reserves the right to \allow other parties to license this paragraph under \different terms. Any use of Digium, Inc. trademarks or \logos (including \"Asterisk\" or \"Digium\") without \express written permission of Digium, Inc. is prohibited.\n" , .buildopt_sum = AST_BUILDOPT_SUM, .load = load_module, .unload = unload_module, .reload = reload, } [static]

Definition at line 521 of file codec_speex.c.

int abr = 0 [static]

Definition at line 64 of file codec_speex.c.

struct ast_module_info* ast_module_info = &__mod_info [static]

Definition at line 521 of file codec_speex.c.

int complexity = 2 [static]

Definition at line 59 of file codec_speex.c.

int dtx = 0 [static]

Definition at line 65 of file codec_speex.c.

Referenced by lintospeex_frameout().

int enhancement = 0 [static]

Definition at line 60 of file codec_speex.c.

struct ast_translator lin16tospeexwb [static]

Definition at line 374 of file codec_speex.c.

struct ast_translator lintospeex [static]

Definition at line 346 of file codec_speex.c.

int pp_agc = 0 [static]

Definition at line 69 of file codec_speex.c.

float pp_agc_level = 8000 [static]

Definition at line 70 of file codec_speex.c.

int pp_denoise = 0 [static]

Definition at line 71 of file codec_speex.c.

int pp_dereverb = 0 [static]

Definition at line 72 of file codec_speex.c.

float pp_dereverb_decay = 0.4 [static]

Definition at line 73 of file codec_speex.c.

float pp_dereverb_level = 0.3 [static]

Definition at line 74 of file codec_speex.c.

int pp_vad = 0 [static]

Definition at line 68 of file codec_speex.c.

int preproc = 0 [static]

Definition at line 67 of file codec_speex.c.

int quality = 3 [static]

Definition at line 58 of file codec_speex.c.

Referenced by ast_rtp_instance_set_stats_vars(), handle_request_bye(), and sip_hangup().

struct ast_translator speextolin [static]

Definition at line 332 of file codec_speex.c.

struct ast_translator speexwbtolin16 [static]

Definition at line 360 of file codec_speex.c.

int vad = 0 [static]

Definition at line 61 of file codec_speex.c.

int vbr = 0 [static]

Definition at line 62 of file codec_speex.c.

float vbr_quality = 4 [static]

Definition at line 63 of file codec_speex.c.

Asterisk developer's documentation

Data Structures

Defines

Functions

Variables

Detailed Description

Define Documentation

Function Documentation

Variable Documentation