Interface header for PRI signaling module. More...
#include "asterisk/channel.h"#include "asterisk/frame.h"#include "asterisk/event.h"#include "asterisk/ccss.h"#include <libpri.h>#include <dahdi/user.h>
Go to the source code of this file.
Data Structures | |
| struct | sig_pri_callback |
| struct | sig_pri_chan |
| struct | sig_pri_mbox |
| struct | sig_pri_span |
Defines | |
| #define | DAHDI_CHAN_MAPPING_LOGICAL 1 |
| #define | DAHDI_CHAN_MAPPING_PHYSICAL 0 |
| #define | DAHDI_OVERLAPDIAL_BOTH (DAHDI_OVERLAPDIAL_INCOMING|DAHDI_OVERLAPDIAL_OUTGOING) |
| #define | DAHDI_OVERLAPDIAL_INCOMING 2 |
| #define | DAHDI_OVERLAPDIAL_NONE 0 |
| #define | DAHDI_OVERLAPDIAL_OUTGOING 1 |
| #define | SIG_BRI (0x2000000 | DAHDI_SIG_CLEAR) |
| #define | SIG_BRI_PTMP (0X4000000 | DAHDI_SIG_CLEAR) |
| #define | SIG_PRI DAHDI_SIG_CLEAR |
| #define | SIG_PRI_AOC_GRANT_D (1 << 1) |
| #define | SIG_PRI_AOC_GRANT_E (1 << 2) |
| #define | SIG_PRI_AOC_GRANT_S (1 << 0) |
| #define | SIG_PRI_DEBUG_DEFAULT 0 |
| #define | SIG_PRI_DEBUG_INTENSE |
| #define | SIG_PRI_DEBUG_NORMAL |
| #define | SIG_PRI_MAX_CHANNELS 672 |
| #define | SIG_PRI_MAX_MWI_CONTEXT_LEN 10 |
| #define | SIG_PRI_MAX_MWI_MAILBOX_STR |
| Maximum mwi_mailbox string length. | |
| #define | SIG_PRI_MAX_MWI_MAILBOXES 8 |
| #define | SIG_PRI_MAX_MWI_MBOX_NUMBER_LEN 10 |
| #define | SIG_PRI_NUM_DCHANS 4 |
| #define | SRVST_BOTH (SRVST_NEAREND | SRVST_FAREND) |
| SRVST_BOTH is used to indicate that both sides of the channel are out-of-service. | |
| #define | SRVST_DBKEY "service-state" |
| Persistent Service State. | |
| #define | SRVST_FAREND (1 << 1) |
| SRVST_FAREND is used to indicate that the far end was taken out-of-service. | |
| #define | SRVST_INITIALIZED 0 |
| SRVST_INITIALIZED is used to indicate a channel being out-of-service The SRVST_INITIALIZED is mostly used maintain backwards compatibility but also may mean that the channel has not yet received a RESTART message. If a channel is out-of-service with this reason a RESTART message will result in the channel being put into service. | |
| #define | SRVST_NEAREND (1 << 0) |
| SRVST_NEAREND is used to indicate that the near end was put out-of-service. | |
| #define | SRVST_TYPE_OOS "O" |
| The out-of-service SERVICE state. | |
Enumerations | |
| enum | sig_pri_call_level { SIG_PRI_CALL_LEVEL_IDLE, SIG_PRI_CALL_LEVEL_SETUP, SIG_PRI_CALL_LEVEL_OVERLAP, SIG_PRI_CALL_LEVEL_PROCEEDING, SIG_PRI_CALL_LEVEL_ALERTING, SIG_PRI_CALL_LEVEL_CONNECT } |
| enum | sig_pri_law { SIG_PRI_DEFLAW = 0, SIG_PRI_ULAW, SIG_PRI_ALAW } |
| enum | sig_pri_tone { SIG_PRI_TONE_RINGTONE = 0, SIG_PRI_TONE_STUTTER, SIG_PRI_TONE_CONGESTION, SIG_PRI_TONE_DIALTONE, SIG_PRI_TONE_DIALRECALL, SIG_PRI_TONE_INFO, SIG_PRI_TONE_BUSY } |
Functions | |
| void | pri_event_alarm (struct sig_pri_span *pri, int index, int before_start_pri) |
| void | pri_event_noalarm (struct sig_pri_span *pri, int index, int before_start_pri) |
| int | pri_is_up (struct sig_pri_span *pri) |
| int | pri_maintenance_bservice (struct pri *pri, struct sig_pri_chan *p, int changestatus) |
| int | pri_send_callrerouting_facility_exec (struct sig_pri_chan *p, enum ast_channel_state chanstate, const char *destination, const char *original, const char *reason) |
| int | pri_send_keypad_facility_exec (struct sig_pri_chan *p, const char *digits) |
| int | sig_pri_answer (struct sig_pri_chan *p, struct ast_channel *ast) |
| int | sig_pri_available (struct sig_pri_chan **pvt, int is_specific_channel) |
| int | sig_pri_call (struct sig_pri_chan *p, struct ast_channel *ast, char *rdest, int timeout, int layer1) |
| int | sig_pri_cc_agent_callee_available (struct ast_cc_agent *agent) |
| Alert the caller that it is time to try recalling. | |
| void | sig_pri_cc_agent_destructor (struct ast_cc_agent *agent) |
| Destroy private data on the agent. | |
| int | sig_pri_cc_agent_init (struct ast_cc_agent *agent, struct sig_pri_chan *pvt_chan) |
| PRI CC agent initialization. | |
| int | sig_pri_cc_agent_party_b_free (struct ast_cc_agent *agent) |
| Let the caller know that the callee has become free but that the caller cannot attempt to call back because he is either busy or there is congestion on his line. | |
| void | sig_pri_cc_agent_req_rsp (struct ast_cc_agent *agent, enum ast_cc_agent_response_reason reason) |
| Response to a CC request. | |
| int | sig_pri_cc_agent_start_monitoring (struct ast_cc_agent *agent) |
| Begin monitoring a busy device. | |
| int | sig_pri_cc_agent_start_offer_timer (struct ast_cc_agent *agent) |
| Start the offer timer. | |
| int | sig_pri_cc_agent_status_req (struct ast_cc_agent *agent) |
| Request the status of the agent's device. | |
| int | sig_pri_cc_agent_stop_offer_timer (struct ast_cc_agent *agent) |
| Stop the offer timer. | |
| int | sig_pri_cc_agent_stop_ringing (struct ast_cc_agent *agent) |
| Request for an agent's phone to stop ringing. | |
| int | sig_pri_cc_monitor_cancel_available_timer (struct ast_cc_monitor *monitor, int *sched_id) |
| Cancel the running available timer. | |
| void | sig_pri_cc_monitor_destructor (void *monitor_pvt) |
| Destroy PRI private data on the monitor. | |
| int | sig_pri_cc_monitor_req_cc (struct ast_cc_monitor *monitor, int *available_timer_id) |
| Request CCSS. | |
| int | sig_pri_cc_monitor_status_rsp (struct ast_cc_monitor *monitor, enum ast_device_state devstate) |
| Status response to an ast_cc_monitor_status_request(). | |
| int | sig_pri_cc_monitor_suspend (struct ast_cc_monitor *monitor) |
| Suspend monitoring. | |
| int | sig_pri_cc_monitor_unsuspend (struct ast_cc_monitor *monitor) |
| Unsuspend monitoring. | |
| void | sig_pri_chan_alarm_notify (struct sig_pri_chan *p, int noalarm) |
| Notify new alarm status. | |
| void | sig_pri_chan_delete (struct sig_pri_chan *doomed) |
| Delete the sig_pri private channel structure. | |
| struct sig_pri_chan * | sig_pri_chan_new (void *pvt_data, struct sig_pri_callback *callback, struct sig_pri_span *pri, int logicalspan, int channo, int trunkgroup) |
| void | sig_pri_cli_show_channels (int fd, struct sig_pri_span *pri) |
| void | sig_pri_cli_show_channels_header (int fd) |
| void | sig_pri_cli_show_span (int fd, int *dchannels, struct sig_pri_span *pri) |
| void | sig_pri_cli_show_spans (int fd, int span, struct sig_pri_span *pri) |
| int | sig_pri_digit_begin (struct sig_pri_chan *pvt, struct ast_channel *ast, char digit) |
| void | sig_pri_extract_called_num_subaddr (struct sig_pri_chan *p, const char *rdest, char *called, size_t called_buff_size) |
| Extract the called number and subaddress from the dial string. | |
| void | sig_pri_fixup (struct ast_channel *oldchan, struct ast_channel *newchan, struct sig_pri_chan *pchan) |
| int | sig_pri_hangup (struct sig_pri_chan *p, struct ast_channel *ast) |
| int | sig_pri_indicate (struct sig_pri_chan *p, struct ast_channel *chan, int condition, const void *data, size_t datalen) |
| void | sig_pri_init_pri (struct sig_pri_span *pri) |
| int | sig_pri_is_chan_available (struct sig_pri_chan *pvt) |
| Determine if a private channel structure is available. | |
| int | sig_pri_load (const char *cc_type_name) |
| Load the sig_pri submodule. | |
| struct ast_channel * | sig_pri_request (struct sig_pri_chan *p, enum sig_pri_law law, const struct ast_channel *requestor, int transfercapability) |
| void | sig_pri_set_alarm (struct sig_pri_chan *p, int in_alarm) |
| int | sig_pri_start_pri (struct sig_pri_span *pri) |
| void | sig_pri_stop_pri (struct sig_pri_span *pri) |
| Stop PRI span. | |
| void | sig_pri_unload (void) |
| Unload the sig_pri submodule. | |
Variables | |
| static const char | dahdi_db [] = "dahdi/registry" |
| The AstDB family. | |
Detailed Description
Interface header for PRI signaling module.
Definition in file sig_pri.h.
Define Documentation
| #define DAHDI_CHAN_MAPPING_LOGICAL 1 |
Definition at line 167 of file sig_pri.h.
Referenced by process_dahdi(), and sig_pri_start_pri().
| #define DAHDI_CHAN_MAPPING_PHYSICAL 0 |
Definition at line 166 of file sig_pri.h.
Referenced by dahdi_chan_conf_default(), and process_dahdi().
| #define DAHDI_OVERLAPDIAL_BOTH (DAHDI_OVERLAPDIAL_INCOMING|DAHDI_OVERLAPDIAL_OUTGOING) |
Definition at line 173 of file sig_pri.h.
Referenced by process_dahdi().
| #define DAHDI_OVERLAPDIAL_INCOMING 2 |
Definition at line 172 of file sig_pri.h.
Referenced by dahdi_handle_event(), dahdi_read(), pri_dchannel(), pri_ss_thread(), process_dahdi(), sig_pri_cli_show_span(), and sig_pri_indicate().
| #define DAHDI_OVERLAPDIAL_NONE 0 |
Definition at line 170 of file sig_pri.h.
Referenced by process_dahdi().
| #define DAHDI_OVERLAPDIAL_OUTGOING 1 |
Definition at line 171 of file sig_pri.h.
Referenced by dahdi_read(), pri_dchannel(), process_dahdi(), and sig_pri_start_pri().
| #define SIG_PRI_AOC_GRANT_D (1 << 1) |
Definition at line 67 of file sig_pri.h.
Referenced by process_dahdi(), sig_pri_aoc_request_from_pri(), sig_pri_handle_subcmds(), and sig_pri_indicate().
| #define SIG_PRI_AOC_GRANT_E (1 << 2) |
Definition at line 68 of file sig_pri.h.
Referenced by process_dahdi(), sig_pri_aoc_request_from_pri(), sig_pri_handle_subcmds(), and sig_pri_indicate().
| #define SIG_PRI_AOC_GRANT_S (1 << 0) |
Definition at line 66 of file sig_pri.h.
Referenced by process_dahdi(), sig_pri_aoc_request_from_pri(), sig_pri_handle_subcmds(), and sig_pri_indicate().
| #define SIG_PRI_DEBUG_DEFAULT 0 |
PRI debug message flags set on initial startup.
Definition at line 63 of file sig_pri.h.
Referenced by sig_pri_start_pri().
| #define SIG_PRI_DEBUG_INTENSE |
(PRI_DEBUG_APDU | PRI_DEBUG_Q931_DUMP | PRI_DEBUG_Q931_STATE | PRI_DEBUG_Q921_STATE \ | PRI_DEBUG_CC | PRI_DEBUG_Q921_RAW | PRI_DEBUG_Q921_DUMP)
PRI debug message flags when intense PRI debugging is turned on at the command line.
Definition at line 42 of file sig_pri.h.
Referenced by handle_pri_debug().
| #define SIG_PRI_DEBUG_NORMAL |
(PRI_DEBUG_APDU | PRI_DEBUG_Q931_DUMP | PRI_DEBUG_Q931_STATE | PRI_DEBUG_Q921_STATE \ | PRI_DEBUG_CC)
PRI debug message flags when normal PRI debugging is turned on at the command line.
Definition at line 37 of file sig_pri.h.
Referenced by handle_pri_debug().
| #define SIG_PRI_MAX_CHANNELS 672 |
| #define SIG_PRI_MAX_MWI_CONTEXT_LEN 10 |
| #define SIG_PRI_MAX_MWI_MAILBOX_STR |
(SIG_PRI_MAX_MWI_MAILBOXES \ * (SIG_PRI_MAX_MWI_MBOX_NUMBER_LEN + 1 + SIG_PRI_MAX_MWI_CONTEXT_LEN + 1))
Maximum mwi_mailbox string length.
max_length = #mailboxes * (mbox_number + '@' + context + ',') The last ',' is a null terminator instead.
| #define SIG_PRI_MAX_MWI_MAILBOXES 8 |
| #define SIG_PRI_MAX_MWI_MBOX_NUMBER_LEN 10 |
| #define SIG_PRI_NUM_DCHANS 4 |
No more than 4 d-channels
Definition at line 158 of file sig_pri.h.
Referenced by __unload_module(), dahdi_pri_error(), dahdi_pri_message(), dahdi_restart(), handle_pri_debug(), handle_pri_service_generic(), handle_pri_show_debug(), mkintf(), prepare_pri(), pri_active_dchan_index(), pri_create_trunkgroup(), pri_dchannel(), pri_find_dchan(), pri_is_up(), setup_dahdi_int(), sig_pri_cli_show_span(), sig_pri_cli_show_spans(), sig_pri_init_pri(), and sig_pri_start_pri().
| #define SRVST_BOTH (SRVST_NEAREND | SRVST_FAREND) |
| #define SRVST_DBKEY "service-state" |
Persistent Service State.
Definition at line 177 of file sig_pri.h.
Referenced by destroy_all_channels(), handle_pri_service_generic(), mkintf(), and pri_dchannel().
| #define SRVST_FAREND (1 << 1) |
SRVST_FAREND is used to indicate that the far end was taken out-of-service.
Definition at line 189 of file sig_pri.h.
Referenced by mkintf(), pri_check_restart(), and pri_dchannel().
| #define SRVST_INITIALIZED 0 |
SRVST_INITIALIZED is used to indicate a channel being out-of-service The SRVST_INITIALIZED is mostly used maintain backwards compatibility but also may mean that the channel has not yet received a RESTART message. If a channel is out-of-service with this reason a RESTART message will result in the channel being put into service.
| #define SRVST_NEAREND (1 << 0) |
SRVST_NEAREND is used to indicate that the near end was put out-of-service.
Definition at line 187 of file sig_pri.h.
Referenced by handle_pri_service_generic(), mkintf(), pri_check_restart(), and pri_dchannel().
| #define SRVST_TYPE_OOS "O" |
The out-of-service SERVICE state.
Definition at line 179 of file sig_pri.h.
Referenced by handle_pri_service_generic(), and pri_dchannel().
Enumeration Type Documentation
| enum sig_pri_call_level |
Call establishment life cycle level for simple comparisons.
- Enumerator:
Definition at line 87 of file sig_pri.h.
{
/*! Call does not exist. */
SIG_PRI_CALL_LEVEL_IDLE,
/*! Call is present but has no response yet. (SETUP) */
SIG_PRI_CALL_LEVEL_SETUP,
/*! Call is collecting digits for overlap dialing. (SETUP ACKNOWLEDGE) */
SIG_PRI_CALL_LEVEL_OVERLAP,
/*! Call routing is happening. (PROCEEDING) */
SIG_PRI_CALL_LEVEL_PROCEEDING,
/*! Called party is being alerted of the call. (ALERTING) */
SIG_PRI_CALL_LEVEL_ALERTING,
/*! Call is connected/answered. (CONNECT) */
SIG_PRI_CALL_LEVEL_CONNECT,
};
| enum sig_pri_law |
Definition at line 80 of file sig_pri.h.
{
SIG_PRI_DEFLAW = 0,
SIG_PRI_ULAW,
SIG_PRI_ALAW
};
| enum sig_pri_tone |
Function Documentation
| void pri_event_alarm | ( | struct sig_pri_span * | pri, |
| int | index, | ||
| int | before_start_pri | ||
| ) |
Definition at line 1967 of file sig_pri.c.
References DCHAN_NOTINALARM, DCHAN_UP, sig_pri_span::dchanavail, and pri_find_dchan().
Referenced by my_handle_dchan_exception(), and prepare_pri().
{
pri->dchanavail[index] &= ~(DCHAN_NOTINALARM | DCHAN_UP);
if (!before_start_pri) {
pri_find_dchan(pri);
}
}
| void pri_event_noalarm | ( | struct sig_pri_span * | pri, |
| int | index, | ||
| int | before_start_pri | ||
| ) |
Definition at line 1975 of file sig_pri.c.
References DCHAN_NOTINALARM, sig_pri_span::dchanavail, and sig_pri_span::dchans.
Referenced by my_handle_dchan_exception(), and prepare_pri().
{
pri->dchanavail[index] |= DCHAN_NOTINALARM;
if (!before_start_pri)
pri_restart(pri->dchans[index]);
}
| int pri_is_up | ( | struct sig_pri_span * | pri | ) |
Definition at line 995 of file sig_pri.c.
References DCHAN_AVAILABLE, sig_pri_span::dchanavail, and SIG_PRI_NUM_DCHANS.
Referenced by pri_dchannel().
{
int x;
for (x = 0; x < SIG_PRI_NUM_DCHANS; x++) {
if (pri->dchanavail[x] == DCHAN_AVAILABLE)
return 1;
}
return 0;
}
| int pri_maintenance_bservice | ( | struct pri * | pri, |
| struct sig_pri_chan * | p, | ||
| int | changestatus | ||
| ) |
Definition at line 7877 of file sig_pri.c.
References sig_pri_chan::channel, PRI_SPAN, and PVT_TO_CHANNEL().
Referenced by handle_pri_service_generic().
{
int channel = PVT_TO_CHANNEL(p);
int span = PRI_SPAN(channel);
return pri_maintenance_service(pri, span, channel, changestatus);
}
| int pri_send_callrerouting_facility_exec | ( | struct sig_pri_chan * | p, |
| enum ast_channel_state | chanstate, | ||
| const char * | destination, | ||
| const char * | original, | ||
| const char * | reason | ||
| ) |
Definition at line 7855 of file sig_pri.c.
References ast_log(), sig_pri_chan::call, LOG_DEBUG, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_lock_private(), and sig_pri_unlock_private().
Referenced by dahdi_send_callrerouting_facility_exec().
{
int res = -1;
sig_pri_lock_private(p);
if (!p->pri || !p->call) {
ast_log(LOG_DEBUG, "Unable to find pri or call on channel!\n");
sig_pri_unlock_private(p);
return -1;
}
pri_grab(p, p->pri);
res = pri_callrerouting_facility(p->pri->pri, p->call, destination, original, reason);
pri_rel(p->pri);
sig_pri_unlock_private(p);
return res;
}
| int pri_send_keypad_facility_exec | ( | struct sig_pri_chan * | p, |
| const char * | digits | ||
| ) |
Definition at line 7836 of file sig_pri.c.
References ast_debug, sig_pri_chan::call, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_lock_private(), and sig_pri_unlock_private().
Referenced by dahdi_send_keypad_facility_exec().
{
sig_pri_lock_private(p);
if (!p->pri || !p->call) {
ast_debug(1, "Unable to find pri or call on channel!\n");
sig_pri_unlock_private(p);
return -1;
}
pri_grab(p, p->pri);
pri_keypad_facility(p->pri->pri, p->call, digits);
pri_rel(p->pri);
sig_pri_unlock_private(p);
return 0;
}
| int sig_pri_answer | ( | struct sig_pri_chan * | p, |
| struct ast_channel * | ast | ||
| ) |
Definition at line 7131 of file sig_pri.c.
References sig_pri_chan::aoc_s_request_invoke_id, sig_pri_chan::aoc_s_request_invoke_id_valid, ast_setstate(), AST_STATE_UP, sig_pri_chan::call, sig_pri_chan::call_level, sig_pri_chan::digital, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), SIG_PRI_CALL_LEVEL_CONNECT, sig_pri_open_media(), and sig_pri_set_dialing().
Referenced by dahdi_answer().
{
int res;
/* Send a pri acknowledge */
pri_grab(p, p->pri);
#if defined(HAVE_PRI_AOC_EVENTS)
if (p->aoc_s_request_invoke_id_valid) {
/* if AOC-S was requested and the invoke id is still present on answer. That means
* no AOC-S rate list was provided, so send a NULL response which will indicate that
* AOC-S is not available */
pri_aoc_s_request_response_send(p->pri->pri, p->call,
p->aoc_s_request_invoke_id, NULL);
p->aoc_s_request_invoke_id_valid = 0;
}
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
if (p->call_level < SIG_PRI_CALL_LEVEL_CONNECT) {
p->call_level = SIG_PRI_CALL_LEVEL_CONNECT;
}
sig_pri_set_dialing(p, 0);
sig_pri_open_media(p);
res = pri_answer(p->pri->pri, p->call, 0, !p->digital);
pri_rel(p->pri);
ast_setstate(ast, AST_STATE_UP);
return res;
}
| int sig_pri_available | ( | struct sig_pri_chan ** | pvt, |
| int | is_specific_channel | ||
| ) |
Definition at line 7226 of file sig_pri.c.
References sig_pri_chan::allocated, ast_mutex_lock, ast_mutex_unlock, HAVE_PRI_CALL_WAITING, sig_pri_span::lock, sig_pri_span::num_call_waiting_calls, sig_pri_chan::pri, sig_pri_span::pri, sig_pri_available_check(), and sig_pri_cw_available().
Referenced by available().
{
struct sig_pri_chan *p = *pvt;
struct sig_pri_span *pri;
if (!p->pri) {
/* Something is wrong here. A PRI channel without the pri pointer? */
return 0;
}
pri = p->pri;
ast_mutex_lock(&pri->lock);
if (
#if defined(HAVE_PRI_CALL_WAITING)
/*
* Only do call waiting calls if we have any
* call waiting call outstanding. We do not
* want new calls to steal a B channel
* freed for an earlier call waiting call.
*/
!pri->num_call_waiting_calls &&
#endif /* defined(HAVE_PRI_CALL_WAITING) */
sig_pri_available_check(p)) {
p->allocated = 1;
ast_mutex_unlock(&pri->lock);
return 1;
}
#if defined(HAVE_PRI_CALL_WAITING)
if (!is_specific_channel) {
struct sig_pri_chan *cw;
cw = sig_pri_cw_available(pri);
if (cw) {
/* We have a call waiting interface to use instead. */
cw->allocated = 1;
*pvt = cw;
ast_mutex_unlock(&pri->lock);
return 1;
}
}
#endif /* defined(HAVE_PRI_CALL_WAITING) */
ast_mutex_unlock(&pri->lock);
return 0;
}
| int sig_pri_call | ( | struct sig_pri_chan * | p, |
| struct ast_channel * | ast, | ||
| char * | rdest, | ||
| int | timeout, | ||
| int | layer1 | ||
| ) |
- Note:
- Parsing must remain in sync with sig_pri_extract_called_num_subaddr().
Definition at line 6471 of file sig_pri.c.
References ast_channel::_state, ao2_ref, sig_pri_span::append_msn_to_user_tag, args, AST_APP_ARG, ast_app_parse_options(), ast_assert, ast_cc_get_monitor_by_recall_core_id(), ast_cc_is_recall(), ast_channel_get_device_name(), AST_CHANNEL_NAME, ast_copy_string(), AST_DECLARE_APP_ARGS, ast_free, ast_log(), AST_NONSTANDARD_APP_ARGS, ast_party_subaddress_init(), ast_setstate(), AST_STATE_DIALING, AST_STATE_DOWN, AST_STATE_RESERVED, ast_strdup, ast_strlen_zero(), ast_test_flag, ast_transfercapability2str(), ast_verb, sig_pri_chan::call, sig_pri_chan::call_level, ast_channel::caller, sig_pri_cc_monitor_instance::cc_id, sig_pri_chan::channel, ast_channel::connected, sig_pri_chan::dialdest, sig_pri_span::dialplan, dialplan2str(), sig_pri_chan::digital, ext, sig_pri_span::facilityenable, sig_pri_chan::hidecallerid, sig_pri_chan::hidecalleridname, ast_party_caller::id, ast_party_connected_line::id, sig_pri_span::initial_user_tag, sig_pri_span::internationalprefix, sig_pri_chan::is_call_waiting, IS_DIGITAL, sig_pri_span::localdialplan, LOG_DEBUG, LOG_ERROR, LOG_WARNING, monitor, ast_party_id::name, ast_channel::name, sig_pri_span::nationalprefix, sig_pri_span::nodetype, ast_party_id::number, OPT_AOC_REQUEST, OPT_ARG_AOC_REQUEST, OPT_ARG_ARRAY_SIZE, OPT_ARG_KEYPAD, OPT_KEYPAD, OPT_REVERSE_CHARGE, sig_pri_chan::outgoing, sig_pri_chan::owner, pbx_builtin_getvar_helper(), ast_party_number::presentation, sig_pri_cc_monitor_instance::pri, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), PRI_TRANS_CAP_DIGITAL, sig_pri_chan::priexclusive, ast_cc_monitor::private_data, PVT_TO_CHANNEL(), S_COR, SIG_PRI_CALL_LEVEL_SETUP, sig_pri_call_opts, sig_pri_cc_type_name, sig_pri_party_subaddress_from_ast(), sig_pri_redirecting_update(), sig_pri_set_dialing(), sig_pri_set_digital(), ast_party_name::str, ast_party_number::str, ast_party_subaddress::str, sig_pri_chan::stripmsd, ast_party_id::subaddress, ast_party_id::tag, ast_channel::transfercapability, ast_party_subaddress::type, sig_pri_chan::use_callingpres, sig_pri_chan::user_tag, ast_party_name::valid, ast_party_number::valid, and ast_party_subaddress::valid.
Referenced by dahdi_call().
{
char dest[256]; /* must be same length as p->dialdest */
struct ast_party_subaddress dialed_subaddress; /* Called subaddress */
struct pri_sr *sr;
char *c, *l, *n, *s;
#ifdef SUPPORT_USERUSER
const char *useruser;
#endif
int core_id;
int pridialplan;
int dp_strip;
int prilocaldialplan;
int ldp_strip;
int exclusive;
#if defined(HAVE_PRI_SETUP_KEYPAD)
const char *keypad;
#endif /* defined(HAVE_PRI_SETUP_KEYPAD) */
AST_DECLARE_APP_ARGS(args,
AST_APP_ARG(group); /* channel/group token */
AST_APP_ARG(ext); /* extension token */
AST_APP_ARG(opts); /* options token */
AST_APP_ARG(other); /* Any remining unused arguments */
);
struct ast_flags opts;
char *opt_args[OPT_ARG_ARRAY_SIZE];
ast_log(LOG_DEBUG, "CALLER NAME: %s NUM: %s\n",
S_COR(ast->connected.id.name.valid, ast->connected.id.name.str, ""),
S_COR(ast->connected.id.number.valid, ast->connected.id.number.str, ""));
if (!p->pri) {
ast_log(LOG_ERROR, "Could not find pri on channel %d\n", p->channel);
return -1;
}
if ((ast->_state != AST_STATE_DOWN) && (ast->_state != AST_STATE_RESERVED)) {
ast_log(LOG_WARNING, "sig_pri_call called on %s, neither down nor reserved\n", ast->name);
return -1;
}
p->dialdest[0] = '\0';
p->outgoing = 1;
ast_copy_string(dest, rdest, sizeof(dest));
AST_NONSTANDARD_APP_ARGS(args, dest, '/');
if (ast_app_parse_options(sig_pri_call_opts, &opts, opt_args, args.opts)) {
/* General invalid option syntax. */
return -1;
}
c = args.ext;
if (!c) {
c = "";
}
/* setup dialed_subaddress if found */
ast_party_subaddress_init(&dialed_subaddress);
s = strchr(c, ':');
if (s) {
*s = '\0';
s++;
/* prefix */
/* 'n' = NSAP */
/* 'u' = User Specified */
/* Default = NSAP */
switch (*s) {
case 'U':
case 'u':
s++;
dialed_subaddress.type = 2;
break;
case 'N':
case 'n':
s++;
/* default already covered with ast_party_subaddress_init */
break;
}
dialed_subaddress.str = s;
dialed_subaddress.valid = 1;
s = NULL;
}
l = NULL;
n = NULL;
if (!p->hidecallerid) {
if (ast->connected.id.number.valid) {
/* If we get to the end of this loop without breaking, there's no
* calleridnum. This is done instead of testing for "unknown" or
* the thousands of other ways that the calleridnum could be
* invalid. */
for (l = ast->connected.id.number.str; l && *l; l++) {
if (strchr("0123456789", *l)) {
l = ast->connected.id.number.str;
break;
}
}
} else {
l = NULL;
}
if (!p->hidecalleridname) {
n = ast->connected.id.name.valid ? ast->connected.id.name.str : NULL;
}
}
if (strlen(c) < p->stripmsd) {
ast_log(LOG_WARNING, "Number '%s' is shorter than stripmsd (%d)\n", c, p->stripmsd);
return -1;
}
pri_grab(p, p->pri);
if (!(p->call = pri_new_call(p->pri->pri))) {
ast_log(LOG_WARNING, "Unable to create call on channel %d\n", p->channel);
pri_rel(p->pri);
return -1;
}
if (!(sr = pri_sr_new())) {
ast_log(LOG_WARNING, "Failed to allocate setup request channel %d\n", p->channel);
pri_destroycall(p->pri->pri, p->call);
p->call = NULL;
pri_rel(p->pri);
return -1;
}
sig_pri_set_digital(p, IS_DIGITAL(ast->transfercapability)); /* push up to parent for EC */
#if defined(HAVE_PRI_CALL_WAITING)
if (p->is_call_waiting) {
/*
* Indicate that this is a call waiting call.
* i.e., Normal call but with no B channel.
*/
pri_sr_set_channel(sr, 0, 0, 1);
} else
#endif /* defined(HAVE_PRI_CALL_WAITING) */
{
/* Should the picked channel be used exclusively? */
if (p->priexclusive || p->pri->nodetype == PRI_NETWORK) {
exclusive = 1;
} else {
exclusive = 0;
}
pri_sr_set_channel(sr, PVT_TO_CHANNEL(p), exclusive, 1);
}
pri_sr_set_bearer(sr, p->digital ? PRI_TRANS_CAP_DIGITAL : ast->transfercapability,
(p->digital ? -1 : layer1));
if (p->pri->facilityenable)
pri_facility_enable(p->pri->pri);
ast_verb(3, "Requested transfer capability: 0x%.2x - %s\n", ast->transfercapability, ast_transfercapability2str(ast->transfercapability));
dp_strip = 0;
pridialplan = p->pri->dialplan - 1;
if (pridialplan == -2 || pridialplan == -3) { /* compute dynamically */
if (strncmp(c + p->stripmsd, p->pri->internationalprefix, strlen(p->pri->internationalprefix)) == 0) {
if (pridialplan == -2) {
dp_strip = strlen(p->pri->internationalprefix);
}
pridialplan = PRI_INTERNATIONAL_ISDN;
} else if (strncmp(c + p->stripmsd, p->pri->nationalprefix, strlen(p->pri->nationalprefix)) == 0) {
if (pridialplan == -2) {
dp_strip = strlen(p->pri->nationalprefix);
}
pridialplan = PRI_NATIONAL_ISDN;
} else {
pridialplan = PRI_LOCAL_ISDN;
}
}
while (c[p->stripmsd] > '9' && c[p->stripmsd] != '*' && c[p->stripmsd] != '#') {
switch (c[p->stripmsd]) {
case 'U':
pridialplan = (PRI_TON_UNKNOWN << 4) | (pridialplan & 0xf);
break;
case 'I':
pridialplan = (PRI_TON_INTERNATIONAL << 4) | (pridialplan & 0xf);
break;
case 'N':
pridialplan = (PRI_TON_NATIONAL << 4) | (pridialplan & 0xf);
break;
case 'L':
pridialplan = (PRI_TON_NET_SPECIFIC << 4) | (pridialplan & 0xf);
break;
case 'S':
pridialplan = (PRI_TON_SUBSCRIBER << 4) | (pridialplan & 0xf);
break;
case 'V':
pridialplan = (PRI_TON_ABBREVIATED << 4) | (pridialplan & 0xf);
break;
case 'R':
pridialplan = (PRI_TON_RESERVED << 4) | (pridialplan & 0xf);
break;
case 'u':
pridialplan = PRI_NPI_UNKNOWN | (pridialplan & 0xf0);
break;
case 'e':
pridialplan = PRI_NPI_E163_E164 | (pridialplan & 0xf0);
break;
case 'x':
pridialplan = PRI_NPI_X121 | (pridialplan & 0xf0);
break;
case 'f':
pridialplan = PRI_NPI_F69 | (pridialplan & 0xf0);
break;
case 'n':
pridialplan = PRI_NPI_NATIONAL | (pridialplan & 0xf0);
break;
case 'p':
pridialplan = PRI_NPI_PRIVATE | (pridialplan & 0xf0);
break;
case 'r':
pridialplan = PRI_NPI_RESERVED | (pridialplan & 0xf0);
break;
default:
if (isalpha(c[p->stripmsd])) {
ast_log(LOG_WARNING, "Unrecognized pridialplan %s modifier: %c\n",
c[p->stripmsd] > 'Z' ? "NPI" : "TON", c[p->stripmsd]);
}
break;
}
c++;
}
#if defined(HAVE_PRI_SETUP_KEYPAD)
if (ast_test_flag(&opts, OPT_KEYPAD)
&& !ast_strlen_zero(opt_args[OPT_ARG_KEYPAD])) {
/* We have a keypad facility digits option with digits. */
keypad = opt_args[OPT_ARG_KEYPAD];
pri_sr_set_keypad_digits(sr, keypad);
} else {
keypad = NULL;
}
if (!keypad || !ast_strlen_zero(c + p->stripmsd + dp_strip))
#endif /* defined(HAVE_PRI_SETUP_KEYPAD) */
{
pri_sr_set_called(sr, c + p->stripmsd + dp_strip, pridialplan, s ? 1 : 0);
}
#if defined(HAVE_PRI_SUBADDR)
if (dialed_subaddress.valid) {
struct pri_party_subaddress subaddress;
memset(&subaddress, 0, sizeof(subaddress));
sig_pri_party_subaddress_from_ast(&subaddress, &dialed_subaddress);
pri_sr_set_called_subaddress(sr, &subaddress);
}
#endif /* defined(HAVE_PRI_SUBADDR) */
#if defined(HAVE_PRI_REVERSE_CHARGE)
if (ast_test_flag(&opts, OPT_REVERSE_CHARGE)) {
pri_sr_set_reversecharge(sr, PRI_REVERSECHARGE_REQUESTED);
}
#endif /* defined(HAVE_PRI_REVERSE_CHARGE) */
#if defined(HAVE_PRI_AOC_EVENTS)
if (ast_test_flag(&opts, OPT_AOC_REQUEST)
&& !ast_strlen_zero(opt_args[OPT_ARG_AOC_REQUEST])) {
if (strchr(opt_args[OPT_ARG_AOC_REQUEST], 's')) {
pri_sr_set_aoc_charging_request(sr, PRI_AOC_REQUEST_S);
}
if (strchr(opt_args[OPT_ARG_AOC_REQUEST], 'd')) {
pri_sr_set_aoc_charging_request(sr, PRI_AOC_REQUEST_D);
}
if (strchr(opt_args[OPT_ARG_AOC_REQUEST], 'e')) {
pri_sr_set_aoc_charging_request(sr, PRI_AOC_REQUEST_E);
}
}
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
/* Setup the user tag for party id's from this device for this call. */
if (p->pri->append_msn_to_user_tag) {
snprintf(p->user_tag, sizeof(p->user_tag), "%s_%s", p->pri->initial_user_tag,
p->pri->nodetype == PRI_NETWORK
? c + p->stripmsd + dp_strip
: S_COR(ast->connected.id.number.valid,
ast->connected.id.number.str, ""));
} else {
ast_copy_string(p->user_tag, p->pri->initial_user_tag, sizeof(p->user_tag));
}
/*
* Replace the caller id tag from the channel creation
* with the actual tag value.
*/
ast_free(ast->caller.id.tag);
ast->caller.id.tag = ast_strdup(p->user_tag);
ldp_strip = 0;
prilocaldialplan = p->pri->localdialplan - 1;
if ((l != NULL) && (prilocaldialplan == -2 || prilocaldialplan == -3)) { /* compute dynamically */
if (strncmp(l, p->pri->internationalprefix, strlen(p->pri->internationalprefix)) == 0) {
if (prilocaldialplan == -2) {
ldp_strip = strlen(p->pri->internationalprefix);
}
prilocaldialplan = PRI_INTERNATIONAL_ISDN;
} else if (strncmp(l, p->pri->nationalprefix, strlen(p->pri->nationalprefix)) == 0) {
if (prilocaldialplan == -2) {
ldp_strip = strlen(p->pri->nationalprefix);
}
prilocaldialplan = PRI_NATIONAL_ISDN;
} else {
prilocaldialplan = PRI_LOCAL_ISDN;
}
}
if (l != NULL) {
while (*l > '9' && *l != '*' && *l != '#') {
switch (*l) {
case 'U':
prilocaldialplan = (PRI_TON_UNKNOWN << 4) | (prilocaldialplan & 0xf);
break;
case 'I':
prilocaldialplan = (PRI_TON_INTERNATIONAL << 4) | (prilocaldialplan & 0xf);
break;
case 'N':
prilocaldialplan = (PRI_TON_NATIONAL << 4) | (prilocaldialplan & 0xf);
break;
case 'L':
prilocaldialplan = (PRI_TON_NET_SPECIFIC << 4) | (prilocaldialplan & 0xf);
break;
case 'S':
prilocaldialplan = (PRI_TON_SUBSCRIBER << 4) | (prilocaldialplan & 0xf);
break;
case 'V':
prilocaldialplan = (PRI_TON_ABBREVIATED << 4) | (prilocaldialplan & 0xf);
break;
case 'R':
prilocaldialplan = (PRI_TON_RESERVED << 4) | (prilocaldialplan & 0xf);
break;
case 'u':
prilocaldialplan = PRI_NPI_UNKNOWN | (prilocaldialplan & 0xf0);
break;
case 'e':
prilocaldialplan = PRI_NPI_E163_E164 | (prilocaldialplan & 0xf0);
break;
case 'x':
prilocaldialplan = PRI_NPI_X121 | (prilocaldialplan & 0xf0);
break;
case 'f':
prilocaldialplan = PRI_NPI_F69 | (prilocaldialplan & 0xf0);
break;
case 'n':
prilocaldialplan = PRI_NPI_NATIONAL | (prilocaldialplan & 0xf0);
break;
case 'p':
prilocaldialplan = PRI_NPI_PRIVATE | (prilocaldialplan & 0xf0);
break;
case 'r':
prilocaldialplan = PRI_NPI_RESERVED | (prilocaldialplan & 0xf0);
break;
default:
if (isalpha(*l)) {
ast_log(LOG_WARNING,
"Unrecognized prilocaldialplan %s modifier: %c\n",
*l > 'Z' ? "NPI" : "TON", *l);
}
break;
}
l++;
}
}
pri_sr_set_caller(sr, l ? (l + ldp_strip) : NULL, n, prilocaldialplan,
p->use_callingpres ? ast->connected.id.number.presentation : (l ? PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN : PRES_NUMBER_NOT_AVAILABLE));
#if defined(HAVE_PRI_SUBADDR)
if (ast->connected.id.subaddress.valid) {
struct pri_party_subaddress subaddress;
memset(&subaddress, 0, sizeof(subaddress));
sig_pri_party_subaddress_from_ast(&subaddress, &ast->connected.id.subaddress);
pri_sr_set_caller_subaddress(sr, &subaddress);
}
#endif /* defined(HAVE_PRI_SUBADDR) */
sig_pri_redirecting_update(p, ast);
#ifdef SUPPORT_USERUSER
/* User-user info */
useruser = pbx_builtin_getvar_helper(p->owner, "USERUSERINFO");
if (useruser)
pri_sr_set_useruser(sr, useruser);
#endif
#if defined(HAVE_PRI_CCSS)
if (ast_cc_is_recall(ast, &core_id, sig_pri_cc_type_name)) {
struct ast_cc_monitor *monitor;
char device_name[AST_CHANNEL_NAME];
/* This is a CC recall call. */
ast_channel_get_device_name(ast, device_name, sizeof(device_name));
monitor = ast_cc_get_monitor_by_recall_core_id(core_id, device_name);
if (monitor) {
struct sig_pri_cc_monitor_instance *instance;
instance = monitor->private_data;
/* If this fails then we have monitor instance ambiguity. */
ast_assert(p->pri == instance->pri);
if (pri_cc_call(p->pri->pri, instance->cc_id, p->call, sr)) {
/* The CC recall call failed for some reason. */
ast_log(LOG_WARNING, "Unable to setup CC recall call to device %s\n",
device_name);
ao2_ref(monitor, -1);
pri_destroycall(p->pri->pri, p->call);
p->call = NULL;
pri_rel(p->pri);
pri_sr_free(sr);
return -1;
}
ao2_ref(monitor, -1);
} else {
core_id = -1;
}
} else
#endif /* defined(HAVE_PRI_CCSS) */
{
core_id = -1;
}
if (core_id == -1 && pri_setup(p->pri->pri, p->call, sr)) {
ast_log(LOG_WARNING, "Unable to setup call to %s (using %s)\n",
c + p->stripmsd + dp_strip, dialplan2str(p->pri->dialplan));
pri_destroycall(p->pri->pri, p->call);
p->call = NULL;
pri_rel(p->pri);
pri_sr_free(sr);
return -1;
}
p->call_level = SIG_PRI_CALL_LEVEL_SETUP;
pri_sr_free(sr);
ast_setstate(ast, AST_STATE_DIALING);
sig_pri_set_dialing(p, 1);
pri_rel(p->pri);
return 0;
}
| int sig_pri_cc_agent_callee_available | ( | struct ast_cc_agent * | agent | ) |
Alert the caller that it is time to try recalling.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
The core will call this function when it receives notice that a monitored party has become available.
The agent's job is to send a message to the caller to notify it of such a change. If the agent is able to discern that the caller is currently unavailable, then the agent should react by calling the ast_cc_caller_unavailable function.
- Return values:
-
0 on success. -1 on error.
Definition at line 8198 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
{
struct sig_pri_cc_agent_prv *cc_pvt;
cc_pvt = agent->private_data;
ast_mutex_lock(&cc_pvt->pri->lock);
pri_cc_remote_user_free(cc_pvt->pri->pri, cc_pvt->cc_id);
ast_mutex_unlock(&cc_pvt->pri->lock);
return 0;
}
| void sig_pri_cc_agent_destructor | ( | struct ast_cc_agent * | agent | ) |
Destroy private data on the agent.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
The core will call this function upon completion or failure of CC.
- Note:
- The agent private_data pointer may be NULL if the agent constructor failed.
- Returns:
- Nothing
Definition at line 8227 of file sig_pri.c.
References ast_free, ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_cc_agent_prv::cc_request_response_pending, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
Referenced by dahdi_pri_cc_agent_destructor().
{
struct sig_pri_cc_agent_prv *cc_pvt;
int res;
cc_pvt = agent->private_data;
if (!cc_pvt) {
/* The agent constructor probably failed. */
return;
}
ast_mutex_lock(&cc_pvt->pri->lock);
res = -1;
if (cc_pvt->cc_request_response_pending) {
res = pri_cc_req_rsp(cc_pvt->pri->pri, cc_pvt->cc_id, 2/* short_term_denial */);
}
if (res) {
pri_cc_cancel(cc_pvt->pri->pri, cc_pvt->cc_id);
}
ast_mutex_unlock(&cc_pvt->pri->lock);
ast_free(cc_pvt);
}
| int sig_pri_cc_agent_init | ( | struct ast_cc_agent * | agent, |
| struct sig_pri_chan * | pvt_chan | ||
| ) |
PRI CC agent initialization.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control. pvt_chan Original channel the agent will attempt to recall.
This callback is called when the CC core is initialized. Agents should allocate any private data necessary for the call and assign it to the private_data on the agent. Additionally, if any ast_cc_agent_flags are pertinent to the specific agent type, they should be set in this function as well.
- Return values:
-
0 on success. -1 on error.
Definition at line 7910 of file sig_pri.c.
References ast_calloc, ast_free, ast_mutex_lock, ast_mutex_unlock, sig_pri_chan::call, sig_pri_cc_agent_prv::cc_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_chan::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
Referenced by dahdi_pri_cc_agent_init().
{
struct sig_pri_cc_agent_prv *cc_pvt;
cc_pvt = ast_calloc(1, sizeof(*cc_pvt));
if (!cc_pvt) {
return -1;
}
ast_mutex_lock(&pvt_chan->pri->lock);
cc_pvt->pri = pvt_chan->pri;
cc_pvt->cc_id = pri_cc_available(pvt_chan->pri->pri, pvt_chan->call);
ast_mutex_unlock(&pvt_chan->pri->lock);
if (cc_pvt->cc_id == -1) {
ast_free(cc_pvt);
return -1;
}
agent->private_data = cc_pvt;
return 0;
}
| int sig_pri_cc_agent_party_b_free | ( | struct ast_cc_agent * | agent | ) |
Let the caller know that the callee has become free but that the caller cannot attempt to call back because he is either busy or there is congestion on his line.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
This is something that really only affects a scenario where a phone places a call over ISDN PTMP to Asterisk, who then connects over PTMP again to the ISDN network. For most agent types, there is no need to implement this callback at all because they don't really need to actually do anything in this situation. If you're having trouble understanding what the purpose of this callback is, then you can be safe simply not implementing it.
- Return values:
-
0 on success. -1 on error.
Definition at line 8142 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
{
struct sig_pri_cc_agent_prv *cc_pvt;
cc_pvt = agent->private_data;
ast_mutex_lock(&cc_pvt->pri->lock);
pri_cc_b_free(cc_pvt->pri->pri, cc_pvt->cc_id);
ast_mutex_unlock(&cc_pvt->pri->lock);
return 0;
}
| void sig_pri_cc_agent_req_rsp | ( | struct ast_cc_agent * | agent, |
| enum ast_cc_agent_response_reason | reason | ||
| ) |
Response to a CC request.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control. reason CC request response status.
When the core receives knowledge that a called party has accepted a CC request, it will call this callback. The core may also call this if there is some error when attempting to process the incoming CC request.
The duty of this is to issue a propper response to a CC request from the caller by acknowledging receipt of that request or rejecting it.
- Returns:
- Nothing
Definition at line 8003 of file sig_pri.c.
References AST_CC_AGENT_RESPONSE_FAILURE_INVALID, AST_CC_AGENT_RESPONSE_FAILURE_TOO_MANY, AST_CC_AGENT_RESPONSE_SUCCESS, ast_cc_failed(), ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_cc_agent_prv::cc_request_response_pending, ast_cc_agent::core_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, ast_cc_agent::private_data, sig_pri_cc_type_name, and status.
{
struct sig_pri_cc_agent_prv *cc_pvt;
int res;
int status;
const char *failed_msg;
static const char *failed_to_send = "Failed to send the CC request response.";
static const char *not_accepted = "The core declined the CC request.";
cc_pvt = agent->private_data;
ast_mutex_lock(&cc_pvt->pri->lock);
if (cc_pvt->cc_request_response_pending) {
cc_pvt->cc_request_response_pending = 0;
/* Convert core response reason to ISDN response status. */
status = 2;/* short_term_denial */
switch (reason) {
case AST_CC_AGENT_RESPONSE_SUCCESS:
status = 0;/* success */
break;
case AST_CC_AGENT_RESPONSE_FAILURE_INVALID:
status = 2;/* short_term_denial */
break;
case AST_CC_AGENT_RESPONSE_FAILURE_TOO_MANY:
status = 5;/* queue_full */
break;
}
res = pri_cc_req_rsp(cc_pvt->pri->pri, cc_pvt->cc_id, status);
if (!status) {
/* CC core request was accepted. */
if (res) {
failed_msg = failed_to_send;
} else {
failed_msg = NULL;
}
} else {
/* CC core request was declined. */
if (res) {
failed_msg = failed_to_send;
} else {
failed_msg = not_accepted;
}
}
} else {
failed_msg = NULL;
}
ast_mutex_unlock(&cc_pvt->pri->lock);
if (failed_msg) {
ast_cc_failed(agent->core_id, "%s agent: %s", sig_pri_cc_type_name, failed_msg);
}
}
| int sig_pri_cc_agent_start_monitoring | ( | struct ast_cc_agent * | agent | ) |
Begin monitoring a busy device.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
The core will call this callback if the callee becomes available but the caller has reported that he is busy. The agent should begin monitoring the caller's device. When the caller becomes available again, the agent should call ast_cc_agent_caller_available.
- Return values:
-
0 on success. -1 on error.
Definition at line 8171 of file sig_pri.c.
{
/* libpri already knows when and how it needs to monitor Party A. */
return 0;
}
| int sig_pri_cc_agent_start_offer_timer | ( | struct ast_cc_agent * | agent | ) |
Start the offer timer.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
This is called by the core when the caller hangs up after a call for which CC may be requested. The agent should begin the timer as configured.
The primary reason why this functionality is left to the specific agent implementations is due to the differing use of schedulers throughout the code. Some channel drivers may already have a scheduler context they wish to use, and amongst those, some may use the ast_sched API while others may use the ast_sched_thread API, which are incompatible.
- Return values:
-
0 on success. -1 on error.
Definition at line 7954 of file sig_pri.c.
{
/* libpri maintains it's own offer timer in the form of T_RETENTION. */
return 0;
}
| int sig_pri_cc_agent_status_req | ( | struct ast_cc_agent * | agent | ) |
Request the status of the agent's device.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
Asynchronous request for the status of any caller which may be a valid caller for the CC transaction. Status responses should be made using the ast_cc_status_response function.
- Return values:
-
0 on success. -1 on error.
Definition at line 8073 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
{
struct sig_pri_cc_agent_prv *cc_pvt;
cc_pvt = agent->private_data;
ast_mutex_lock(&cc_pvt->pri->lock);
pri_cc_status_req(cc_pvt->pri->pri, cc_pvt->cc_id);
ast_mutex_unlock(&cc_pvt->pri->lock);
return 0;
}
| int sig_pri_cc_agent_stop_offer_timer | ( | struct ast_cc_agent * | agent | ) |
Stop the offer timer.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
This callback is called by the CC core when the caller has requested CC.
- Return values:
-
0 on success. -1 on error.
Definition at line 7975 of file sig_pri.c.
{
/* libpri maintains it's own offer timer in the form of T_RETENTION. */
return 0;
}
| int sig_pri_cc_agent_stop_ringing | ( | struct ast_cc_agent * | agent | ) |
Request for an agent's phone to stop ringing.
- Since:
- 1.8
- Parameters:
-
agent CC core agent control.
The usefulness of this is quite limited. The only specific known case for this is if Asterisk requests CC over an ISDN PTMP link as the TE side. If other phones are in the same recall group as the Asterisk server, and one of those phones picks up the recall notice, then Asterisk will receive a "stop ringing" notification from the NT side of the PTMP link. This indication needs to be passed to the phone on the other side of the Asterisk server which originally placed the call so that it will stop ringing. Since the phone may be of any type, it is necessary to have a callback that the core can know about.
- Return values:
-
0 on success. -1 on error.
Definition at line 8108 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_agent_prv::cc_id, sig_pri_span::lock, sig_pri_cc_agent_prv::pri, sig_pri_span::pri, and ast_cc_agent::private_data.
{
struct sig_pri_cc_agent_prv *cc_pvt;
cc_pvt = agent->private_data;
ast_mutex_lock(&cc_pvt->pri->lock);
pri_cc_stop_alerting(cc_pvt->pri->pri, cc_pvt->cc_id);
ast_mutex_unlock(&cc_pvt->pri->lock);
return 0;
}
| int sig_pri_cc_monitor_cancel_available_timer | ( | struct ast_cc_monitor * | monitor, |
| int * | sched_id | ||
| ) |
Cancel the running available timer.
- Since:
- 1.8
- Parameters:
-
monitor CC core monitor control. sched_id Available timer scheduler id to cancel. Will never be NULL for a device monitor.
In most cases, this function will likely consist of just a call to AST_SCHED_DEL. It might have been possible to do this within the core, but unfortunately the mixture of sched_thread and sched usage in Asterisk prevents such usage.
- Return values:
-
0 on success -1 on failure.
Definition at line 8453 of file sig_pri.c.
{
/*
* libpri maintains it's own available timer as one of:
* T_CCBS2/T_CCBS5/T_CCBS6/QSIG_CCBS_T2
* T_CCNR2/T_CCNR5/T_CCNR6/QSIG_CCNR_T2
*/
return 0;
}
| void sig_pri_cc_monitor_destructor | ( | void * | monitor_pvt | ) |
Destroy PRI private data on the monitor.
- Since:
- 1.8
- Parameters:
-
monitor_pvt CC device monitor private data pointer.
Implementers of this callback are responsible for destroying all heap-allocated data in the monitor's private_data pointer, including the private_data itself.
Definition at line 8476 of file sig_pri.c.
References ao2_ref, and ao2_unlink.
{
struct sig_pri_cc_monitor_instance *instance;
instance = monitor_pvt;
if (!instance) {
return;
}
ao2_unlink(sig_pri_cc_monitors, instance);
ao2_ref(instance, -1);
}
| int sig_pri_cc_monitor_req_cc | ( | struct ast_cc_monitor * | monitor, |
| int * | available_timer_id | ||
| ) |
Request CCSS.
- Since:
- 1.8
- Parameters:
-
monitor CC core monitor control. available_timer_id Where to put the available timer scheduler id. Will never be NULL for a device monitor.
Perform whatever steps are necessary in order to request CC. In addition, the monitor implementation is responsible for starting the available timer in this callback. The scheduler ID for the callback must be stored in the parent_link's child_avail_id field.
- Return values:
-
0 on success -1 on failure.
Definition at line 8309 of file sig_pri.c.
References AST_CC_CCBS, AST_CC_CCNR, ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_monitor_instance::cc_id, sig_pri_span::lock, sig_pri_cc_monitor_instance::pri, sig_pri_span::pri, ast_cc_monitor::private_data, and ast_cc_monitor::service_offered.
{
struct sig_pri_cc_monitor_instance *instance;
int cc_mode;
int res;
switch (monitor->service_offered) {
case AST_CC_CCBS:
cc_mode = 0;/* CCBS */
break;
case AST_CC_CCNR:
cc_mode = 1;/* CCNR */
break;
default:
/* CC service not supported by ISDN. */
return -1;
}
instance = monitor->private_data;
/* libpri handles it's own available timer. */
ast_mutex_lock(&instance->pri->lock);
res = pri_cc_req(instance->pri->pri, instance->cc_id, cc_mode);
ast_mutex_unlock(&instance->pri->lock);
return res;
}
| int sig_pri_cc_monitor_status_rsp | ( | struct ast_cc_monitor * | monitor, |
| enum ast_device_state | devstate | ||
| ) |
Status response to an ast_cc_monitor_status_request().
- Since:
- 1.8
- Parameters:
-
monitor CC core monitor control. devstate Current status of a Party A device.
Alert a monitor as to the status of the agent for which the monitor had previously requested a status request.
- Note:
- Zero or more responses may come as a result.
- Return values:
-
0 on success -1 on failure.
Definition at line 8408 of file sig_pri.c.
References AST_DEVICE_BUSY, AST_DEVICE_INUSE, AST_DEVICE_NOT_INUSE, AST_DEVICE_UNKNOWN, ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_monitor_instance::cc_id, sig_pri_span::lock, sig_pri_cc_monitor_instance::pri, sig_pri_span::pri, and ast_cc_monitor::private_data.
{
struct sig_pri_cc_monitor_instance *instance;
int cc_status;
switch (devstate) {
case AST_DEVICE_UNKNOWN:
case AST_DEVICE_NOT_INUSE:
cc_status = 0;/* free */
break;
case AST_DEVICE_BUSY:
case AST_DEVICE_INUSE:
cc_status = 1;/* busy */
break;
default:
/* Don't know how to interpret this device state into free/busy status. */
return 0;
}
instance = monitor->private_data;
ast_mutex_lock(&instance->pri->lock);
pri_cc_status_req_rsp(instance->pri->pri, instance->cc_id, cc_status);
ast_mutex_unlock(&instance->pri->lock);
return 0;
}
| int sig_pri_cc_monitor_suspend | ( | struct ast_cc_monitor * | monitor | ) |
Suspend monitoring.
- Since:
- 1.8
- Parameters:
-
monitor CC core monitor control.
Implementers must perform the necessary steps to suspend monitoring.
- Return values:
-
0 on success -1 on failure.
Definition at line 8352 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_monitor_instance::cc_id, sig_pri_span::lock, sig_pri_cc_monitor_instance::pri, sig_pri_span::pri, and ast_cc_monitor::private_data.
{
struct sig_pri_cc_monitor_instance *instance;
instance = monitor->private_data;
ast_mutex_lock(&instance->pri->lock);
pri_cc_status(instance->pri->pri, instance->cc_id, 1/* busy */);
ast_mutex_unlock(&instance->pri->lock);
return 0;
}
| int sig_pri_cc_monitor_unsuspend | ( | struct ast_cc_monitor * | monitor | ) |
Unsuspend monitoring.
- Since:
- 1.8
- Parameters:
-
monitor CC core monitor control.
Perform the necessary steps to unsuspend monitoring.
- Return values:
-
0 on success -1 on failure.
Definition at line 8378 of file sig_pri.c.
References ast_mutex_lock, ast_mutex_unlock, sig_pri_cc_monitor_instance::cc_id, sig_pri_span::lock, sig_pri_cc_monitor_instance::pri, sig_pri_span::pri, and ast_cc_monitor::private_data.
{
struct sig_pri_cc_monitor_instance *instance;
instance = monitor->private_data;
ast_mutex_lock(&instance->pri->lock);
pri_cc_status(instance->pri->pri, instance->cc_id, 0/* free */);
ast_mutex_unlock(&instance->pri->lock);
return 0;
}
| void sig_pri_chan_alarm_notify | ( | struct sig_pri_chan * | p, |
| int | noalarm | ||
| ) |
Notify new alarm status.
- Parameters:
-
p Channel private pointer. noalarm Non-zero if not in alarm mode.
- Note:
- Assumes the sig_pri_lock_private(p) is already obtained.
- Returns:
- Nothing
Definition at line 7674 of file sig_pri.c.
References ast_channel::_softhangup, AST_SOFTHANGUP_DEV, sig_pri_chan::call, sig_pri_chan::owner, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_set_alarm(), and sig_pri_span_devstate_changed().
Referenced by dahdi_handle_event(), and handle_init_event().
{
pri_grab(p, p->pri);
sig_pri_set_alarm(p, !noalarm);
if (!noalarm) {
if (pri_get_timer(p->pri->pri, PRI_TIMER_T309) < 0) {
/* T309 is not enabled : destroy calls when alarm occurs */
if (p->call) {
pri_destroycall(p->pri->pri, p->call);
p->call = NULL;
}
if (p->owner)
p->owner->_softhangup |= AST_SOFTHANGUP_DEV;
}
}
sig_pri_span_devstate_changed(p->pri);
pri_rel(p->pri);
}
| void sig_pri_chan_delete | ( | struct sig_pri_chan * | doomed | ) |
Delete the sig_pri private channel structure.
- Since:
- 1.8
- Parameters:
-
doomed sig_pri private channel structure to delete.
- Returns:
- Nothing
Definition at line 7721 of file sig_pri.c.
References ast_free.
Referenced by destroy_dahdi_pvt().
{
ast_free(doomed);
}
| struct sig_pri_chan* sig_pri_chan_new | ( | void * | pvt_data, |
| struct sig_pri_callback * | callback, | ||
| struct sig_pri_span * | pri, | ||
| int | logicalspan, | ||
| int | channo, | ||
| int | trunkgroup | ||
| ) | [read] |
Definition at line 7693 of file sig_pri.c.
References ast_calloc, sig_pri_chan::calls, sig_pri_chan::chan_pvt, sig_pri_chan::logicalspan, sig_pri_chan::mastertrunkgroup, sig_pri_chan::pri, and sig_pri_chan::prioffset.
Referenced by dahdi_new_pri_nobch_channel(), and mkintf().
{
struct sig_pri_chan *p;
p = ast_calloc(1, sizeof(*p));
if (!p)
return p;
p->logicalspan = logicalspan;
p->prioffset = channo;
p->mastertrunkgroup = trunkgroup;
p->calls = callback;
p->chan_pvt = pvt_data;
p->pri = pri;
return p;
}
| void sig_pri_cli_show_channels | ( | int | fd, |
| struct sig_pri_span * | pri | ||
| ) |
Definition at line 7734 of file sig_pri.c.
References ast_channel_unlock, ast_cli(), ast_mutex_lock, ast_mutex_unlock, sig_pri_chan::call, sig_pri_chan::call_level, sig_pri_chan::channel, sig_pri_span::lock, ast_channel::name, sig_pri_chan::no_b_channel, sig_pri_span::numchans, sig_pri_chan::owner, sig_pri_span::pvts, sig_pri_call_level2str(), sig_pri_is_chan_available(), sig_pri_lock_owner(), sig_pri_lock_private(), SIG_PRI_SC_LINE, sig_pri_unlock_private(), and sig_pri_span::span.
Referenced by handle_pri_show_channels().
{
char line[256];
int idx;
struct sig_pri_chan *pvt;
ast_mutex_lock(&pri->lock);
for (idx = 0; idx < pri->numchans; ++idx) {
if (!pri->pvts[idx]) {
continue;
}
pvt = pri->pvts[idx];
sig_pri_lock_private(pvt);
sig_pri_lock_owner(pri, idx);
if (pvt->no_b_channel && sig_pri_is_chan_available(pvt)) {
/* Don't show held/call-waiting channels if they are not in use. */
sig_pri_unlock_private(pvt);
continue;
}
snprintf(line, sizeof(line), SIG_PRI_SC_LINE,
pri->span,
pvt->channel,
pvt->no_b_channel ? "No" : "Yes",/* Has media */
sig_pri_is_chan_available(pvt) ? "Yes" : "No",
sig_pri_call_level2str(pvt->call_level),
pvt->call ? "Yes" : "No",
pvt->owner ? pvt->owner->name : "");
if (pvt->owner) {
ast_channel_unlock(pvt->owner);
}
sig_pri_unlock_private(pvt);
ast_mutex_unlock(&pri->lock);
ast_cli(fd, "%s\n", line);
ast_mutex_lock(&pri->lock);
}
ast_mutex_unlock(&pri->lock);
}
| void sig_pri_cli_show_channels_header | ( | int | fd | ) |
Definition at line 7728 of file sig_pri.c.
References ast_cli(), and SIG_PRI_SC_HEADER.
Referenced by handle_pri_show_channels().
{
ast_cli(fd, SIG_PRI_SC_HEADER, "PRI", "", "B", "Chan", "Call", "PRI", "Channel");
ast_cli(fd, SIG_PRI_SC_HEADER, "Span", "Chan", "Chan", "Idle", "Level", "Call", "Name");
}
| void sig_pri_cli_show_span | ( | int | fd, |
| int * | dchannels, | ||
| struct sig_pri_span * | pri | ||
| ) |
Definition at line 7806 of file sig_pri.c.
References ast_cli(), ast_mutex_lock, ast_mutex_unlock, build_status(), DAHDI_OVERLAPDIAL_INCOMING, sig_pri_span::dchanavail, sig_pri_span::dchans, free, sig_pri_span::lock, sig_pri_span::overlapdial, sig_pri_span::pri, pri_order(), SIG_PRI_NUM_DCHANS, and status.
Referenced by handle_pri_show_span().
{
int x;
char status[256];
for (x = 0; x < SIG_PRI_NUM_DCHANS; x++) {
if (pri->dchans[x]) {
#ifdef PRI_DUMP_INFO_STR
char *info_str = NULL;
#endif
ast_cli(fd, "%s D-channel: %d\n", pri_order(x), dchannels[x]);
build_status(status, sizeof(status), pri->dchanavail[x], pri->dchans[x] == pri->pri);
ast_cli(fd, "Status: %s\n", status);
ast_mutex_lock(&pri->lock);
#ifdef PRI_DUMP_INFO_STR
info_str = pri_dump_info_str(pri->pri);
if (info_str) {
ast_cli(fd, "%s", info_str);
free(info_str);
}
#else
pri_dump_info(pri->pri);
#endif
ast_mutex_unlock(&pri->lock);
ast_cli(fd, "Overlap Recv: %s\n\n", (pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)?"Yes":"No");
ast_cli(fd, "\n");
}
}
}
| void sig_pri_cli_show_spans | ( | int | fd, |
| int | span, | ||
| struct sig_pri_span * | pri | ||
| ) |
Definition at line 7794 of file sig_pri.c.
References ast_cli(), build_status(), sig_pri_span::dchanavail, sig_pri_span::dchans, sig_pri_span::pri, SIG_PRI_NUM_DCHANS, and status.
Referenced by handle_pri_show_spans().
{
char status[256];
int x;
for (x = 0; x < SIG_PRI_NUM_DCHANS; x++) {
if (pri->dchans[x]) {
build_status(status, sizeof(status), pri->dchanavail[x], pri->dchans[x] == pri->pri);
ast_cli(fd, "PRI span %d/%d: %s\n", span, x, status);
}
}
}
| int sig_pri_digit_begin | ( | struct sig_pri_chan * | pvt, |
| struct ast_channel * | ast, | ||
| char | digit | ||
| ) |
Definition at line 7274 of file sig_pri.c.
References ast_channel::_state, ast_debug, ast_log(), AST_STATE_DIALING, sig_pri_chan::call, sig_pri_chan::call_level, sig_pri_chan::dialdest, len(), LOG_WARNING, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_call_level2str(), SIG_PRI_CALL_LEVEL_CONNECT, SIG_PRI_CALL_LEVEL_OVERLAP, SIG_PRI_CALL_LEVEL_PROCEEDING, and sig_pri_span::span.
Referenced by dahdi_digit_begin().
{
if (ast->_state == AST_STATE_DIALING) {
if (pvt->call_level < SIG_PRI_CALL_LEVEL_OVERLAP) {
unsigned int len;
len = strlen(pvt->dialdest);
if (len < sizeof(pvt->dialdest) - 1) {
ast_debug(1, "Queueing digit '%c' since setup_ack not yet received\n",
digit);
pvt->dialdest[len++] = digit;
pvt->dialdest[len] = '\0';
} else {
ast_log(LOG_WARNING,
"Span %d: Deferred digit buffer overflow for digit '%c'.\n",
pvt->pri->span, digit);
}
return 0;
}
if (pvt->call_level < SIG_PRI_CALL_LEVEL_PROCEEDING) {
pri_grab(pvt, pvt->pri);
pri_information(pvt->pri->pri, pvt->call, digit);
pri_rel(pvt->pri);
return 0;
}
if (pvt->call_level < SIG_PRI_CALL_LEVEL_CONNECT) {
ast_log(LOG_WARNING,
"Span %d: Digit '%c' may be ignored by peer. (Call level:%d(%s))\n",
pvt->pri->span, digit, pvt->call_level,
sig_pri_call_level2str(pvt->call_level));
}
}
return 1;
}
| void sig_pri_extract_called_num_subaddr | ( | struct sig_pri_chan * | p, |
| const char * | rdest, | ||
| char * | called, | ||
| size_t | called_buff_size | ||
| ) |
Extract the called number and subaddress from the dial string.
- Since:
- 1.8
- Parameters:
-
p sig_pri channel structure. rdest Dial string buffer to extract called number and subaddress. called Buffer to fill with extracted <number>[:<subaddress>] called_buff_size Size of buffer to fill.
- Note:
- Parsing must remain in sync with sig_pri_call().
- Returns:
- Nothing
Definition at line 6392 of file sig_pri.c.
References args, AST_APP_ARG, AST_DECLARE_APP_ARGS, AST_NONSTANDARD_APP_ARGS, ast_strdupa, ast_strlen_zero(), ext, and sig_pri_chan::stripmsd.
Referenced by dahdi_request().
{
char *dial;
char *number;
char *subaddr;
AST_DECLARE_APP_ARGS(args,
AST_APP_ARG(group); /* channel/group token */
AST_APP_ARG(ext); /* extension token */
//AST_APP_ARG(opts); /* options token */
AST_APP_ARG(other); /* Any remining unused arguments */
);
/* Get private copy of dial string and break it up. */
dial = ast_strdupa(rdest);
AST_NONSTANDARD_APP_ARGS(args, dial, '/');
number = args.ext;
if (!number) {
number = "";
}
/* Find and extract dialed_subaddress */
subaddr = strchr(number, ':');
if (subaddr) {
*subaddr++ = '\0';
/* Skip subaddress type prefix. */
switch (*subaddr) {
case 'U':
case 'u':
case 'N':
case 'n':
++subaddr;
break;
default:
break;
}
}
/* Skip type-of-number/dial-plan prefix characters. */
if (strlen(number) < p->stripmsd) {
number = "";
} else {
number += p->stripmsd;
while (isalpha(*number)) {
++number;
}
}
/* Fill buffer with extracted number and subaddress. */
if (ast_strlen_zero(subaddr)) {
/* Put in called number only since there is no subaddress. */
snprintf(called, called_buff_size, "%s", number);
} else {
/* Put in called number and subaddress. */
snprintf(called, called_buff_size, "%s:%s", number, subaddr);
}
}
| void sig_pri_fixup | ( | struct ast_channel * | oldchan, |
| struct ast_channel * | newchan, | ||
| struct sig_pri_chan * | pchan | ||
| ) |
Definition at line 7886 of file sig_pri.c.
References sig_pri_chan::owner.
Referenced by dahdi_fixup().
| int sig_pri_hangup | ( | struct sig_pri_chan * | p, |
| struct ast_channel * | ast | ||
| ) |
Definition at line 6301 of file sig_pri.c.
References sig_pri_chan::allocated, sig_pri_chan::alreadyhungup, sig_pri_chan::aoc_e, sig_pri_chan::aoc_s_request_invoke_id_valid, ast_atomic_fetchadd_int(), ast_debug, ast_log(), ast_strlen_zero(), sig_pri_chan::call, sig_pri_chan::call_level, cause, sig_pri_chan::channel, sig_pri_chan::cid_name, sig_pri_chan::cid_num, sig_pri_chan::cid_subaddr, sig_pri_chan::exten, ast_channel::hangupcause, sig_pri_chan::holding_aoce, sig_pri_chan::is_call_waiting, LOG_WARNING, sig_pri_span::num_call_waiting_calls, sig_pri_chan::outgoing, sig_pri_chan::owner, pbx_builtin_getvar_helper(), sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_chan::progress, SIG_PRI_CALL_LEVEL_IDLE, sig_pri_set_dialing(), sig_pri_set_digital(), sig_pri_span_devstate_changed(), ast_channel::tech_pvt, sig_pri_chan::user_tag, and sig_pri_chan::waiting_for_aoce.
Referenced by dahdi_hangup().
{
ast_debug(1, "%s %d\n", __FUNCTION__, p->channel);
if (!ast->tech_pvt) {
ast_log(LOG_WARNING, "Asked to hangup channel not connected\n");
return 0;
}
p->outgoing = 0;
sig_pri_set_digital(p, 0); /* push up to parent for EC*/
#if defined(HAVE_PRI_CALL_WAITING)
if (p->is_call_waiting) {
p->is_call_waiting = 0;
ast_atomic_fetchadd_int(&p->pri->num_call_waiting_calls, -1);
}
#endif /* defined(HAVE_PRI_CALL_WAITING) */
p->call_level = SIG_PRI_CALL_LEVEL_IDLE;
p->progress = 0;
p->cid_num[0] = '\0';
p->cid_subaddr[0] = '\0';
p->cid_name[0] = '\0';
p->user_tag[0] = '\0';
p->exten[0] = '\0';
sig_pri_set_dialing(p, 0);
/* Make sure we really have a call */
pri_grab(p, p->pri);
if (p->call) {
#if defined(SUPPORT_USERUSER)
const char *useruser = pbx_builtin_getvar_helper(ast, "USERUSERINFO");
if (!ast_strlen_zero(useruser)) {
pri_call_set_useruser(p->call, useruser);
}
#endif /* defined(SUPPORT_USERUSER) */
#if defined(HAVE_PRI_AOC_EVENTS)
if (p->holding_aoce) {
pri_aoc_e_send(p->pri->pri, p->call, &p->aoc_e);
}
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
if (p->alreadyhungup) {
ast_debug(1, "Already hungup... Calling hangup once, and clearing call\n");
pri_hangup(p->pri->pri, p->call, -1);
p->call = NULL;
} else {
const char *cause = pbx_builtin_getvar_helper(ast,"PRI_CAUSE");
int icause = ast->hangupcause ? ast->hangupcause : -1;
p->alreadyhungup = 1;
if (!ast_strlen_zero(cause)) {
if (atoi(cause)) {
icause = atoi(cause);
}
}
ast_debug(1,
"Not yet hungup... Calling hangup with cause %d, and clearing call\n",
icause);
pri_hangup(p->pri->pri, p->call, icause);
}
}
#if defined(HAVE_PRI_AOC_EVENTS)
p->aoc_s_request_invoke_id_valid = 0;
p->holding_aoce = 0;
p->waiting_for_aoce = 0;
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
p->allocated = 0;
p->owner = NULL;
sig_pri_span_devstate_changed(p->pri);
pri_rel(p->pri);
return 0;
}
| int sig_pri_indicate | ( | struct sig_pri_chan * | p, |
| struct ast_channel * | chan, | ||
| int | condition, | ||
| const void * | data, | ||
| size_t | datalen | ||
| ) |
Definition at line 6902 of file sig_pri.c.
References ast_channel::_softhangup, ast_channel::_state, sig_pri_span::aoc_passthrough_flag, AST_AOC_D, ast_aoc_decode(), ast_aoc_destroy_decoded(), AST_AOC_E, ast_aoc_get_msg_type(), ast_aoc_get_termination_request(), AST_AOC_REQUEST, AST_AOC_S, AST_CAUSE_INVALID_NUMBER_FORMAT, AST_CAUSE_NORMAL_CLEARING, AST_CAUSE_SWITCH_CONGESTION, AST_CAUSE_USER_BUSY, AST_CONTROL_AOC, AST_CONTROL_BUSY, AST_CONTROL_CONGESTION, AST_CONTROL_CONNECTED_LINE, AST_CONTROL_HOLD, AST_CONTROL_INCOMPLETE, AST_CONTROL_PROCEEDING, AST_CONTROL_PROGRESS, AST_CONTROL_REDIRECTING, AST_CONTROL_RINGING, AST_CONTROL_SRCUPDATE, AST_CONTROL_UNHOLD, ast_debug, ast_log(), ast_moh_start(), ast_moh_stop(), ast_setstate(), AST_SOFTHANGUP_DEV, ast_softhangup_nolock(), AST_STATE_RING, AST_STATE_RINGING, AST_STATE_UP, sig_pri_chan::call, sig_pri_chan::call_level, ast_channel::connected, DAHDI_OVERLAPDIAL_INCOMING, sig_pri_chan::digital, ast_channel::hangupcause, ast_party_connected_line::id, LOG_DEBUG, sig_pri_chan::mohinterpret, ast_channel::name, sig_pri_chan::no_b_channel, sig_pri_chan::outgoing, sig_pri_span::overlapdial, sig_pri_chan::pri, sig_pri_span::pri, pri_grab(), pri_rel(), sig_pri_chan::priindication_oob, sig_pri_chan::prioffset, sig_pri_chan::progress, PVT_TO_CHANNEL(), sig_pri_aoc_d_from_ast(), sig_pri_aoc_e_from_ast(), SIG_PRI_AOC_GRANT_D, SIG_PRI_AOC_GRANT_E, SIG_PRI_AOC_GRANT_S, sig_pri_aoc_s_from_ast(), SIG_PRI_CALL_LEVEL_ALERTING, SIG_PRI_CALL_LEVEL_CONNECT, SIG_PRI_CALL_LEVEL_PROCEEDING, sig_pri_party_id_from_ast(), sig_pri_play_tone(), sig_pri_redirecting_update(), sig_pri_set_dialing(), sig_pri_set_digital(), SIG_PRI_TONE_BUSY, SIG_PRI_TONE_CONGESTION, SIG_PRI_TONE_RINGTONE, and sig_pri_chan::waiting_for_aoce.
Referenced by dahdi_indicate().
{
int res = -1;
switch (condition) {
case AST_CONTROL_BUSY:
if (p->priindication_oob || p->no_b_channel) {
chan->hangupcause = AST_CAUSE_USER_BUSY;
chan->_softhangup |= AST_SOFTHANGUP_DEV;
res = 0;
break;
}
res = sig_pri_play_tone(p, SIG_PRI_TONE_BUSY);
if (p->call_level < SIG_PRI_CALL_LEVEL_ALERTING && !p->outgoing) {
chan->hangupcause = AST_CAUSE_USER_BUSY;
p->progress = 1;/* No need to send plain PROGRESS after this. */
if (p->pri && p->pri->pri) {
pri_grab(p, p->pri);
#ifdef HAVE_PRI_PROG_W_CAUSE
pri_progress_with_cause(p->pri->pri, p->call, PVT_TO_CHANNEL(p), 1, chan->hangupcause);
#else
pri_progress(p->pri->pri,p->call, PVT_TO_CHANNEL(p), 1);
#endif
pri_rel(p->pri);
}
}
break;
case AST_CONTROL_RINGING:
if (p->call_level < SIG_PRI_CALL_LEVEL_ALERTING && !p->outgoing) {
p->call_level = SIG_PRI_CALL_LEVEL_ALERTING;
if (p->pri && p->pri->pri) {
pri_grab(p, p->pri);
pri_acknowledge(p->pri->pri,p->call, PVT_TO_CHANNEL(p),
p->no_b_channel || p->digital ? 0 : 1);
pri_rel(p->pri);
}
}
res = sig_pri_play_tone(p, SIG_PRI_TONE_RINGTONE);
if (chan->_state != AST_STATE_UP) {
if (chan->_state != AST_STATE_RING)
ast_setstate(chan, AST_STATE_RINGING);
}
break;
case AST_CONTROL_PROCEEDING:
ast_debug(1,"Received AST_CONTROL_PROCEEDING on %s\n",chan->name);
if (p->call_level < SIG_PRI_CALL_LEVEL_PROCEEDING && !p->outgoing) {
p->call_level = SIG_PRI_CALL_LEVEL_PROCEEDING;
if (p->pri && p->pri->pri) {
pri_grab(p, p->pri);
pri_proceeding(p->pri->pri,p->call, PVT_TO_CHANNEL(p),
p->no_b_channel || p->digital ? 0 : 1);
if (!p->no_b_channel && !p->digital) {
sig_pri_set_dialing(p, 0);
}
pri_rel(p->pri);
}
}
/* don't continue in ast_indicate */
res = 0;
break;
case AST_CONTROL_PROGRESS:
ast_debug(1,"Received AST_CONTROL_PROGRESS on %s\n",chan->name);
sig_pri_set_digital(p, 0); /* Digital-only calls isn't allowing any inband progress messages */
if (!p->progress && p->call_level < SIG_PRI_CALL_LEVEL_ALERTING && !p->outgoing
&& !p->no_b_channel) {
p->progress = 1;/* No need to send plain PROGRESS again. */
if (p->pri && p->pri->pri) {
pri_grab(p, p->pri);
#ifdef HAVE_PRI_PROG_W_CAUSE
pri_progress_with_cause(p->pri->pri,p->call, PVT_TO_CHANNEL(p), 1, -1); /* no cause at all */
#else
pri_progress(p->pri->pri,p->call, PVT_TO_CHANNEL(p), 1);
#endif
pri_rel(p->pri);
}
}
/* don't continue in ast_indicate */
res = 0;
break;
case AST_CONTROL_INCOMPLETE:
/* If we are connected or if we support overlap dialing, wait for additional digits */
if (p->call_level == SIG_PRI_CALL_LEVEL_CONNECT || (p->pri->overlapdial & DAHDI_OVERLAPDIAL_INCOMING)) {
res = 0;
break;
}
/* Otherwise, treat as congestion */
chan->hangupcause = AST_CAUSE_INVALID_NUMBER_FORMAT;
/* Falls through */
case AST_CONTROL_CONGESTION:
if (p->priindication_oob || p->no_b_channel) {
/* There are many cause codes that generate an AST_CONTROL_CONGESTION. */
switch (chan->hangupcause) {
case AST_CAUSE_USER_BUSY:
case AST_CAUSE_NORMAL_CLEARING:
case 0:/* Cause has not been set. */
/* Supply a more appropriate cause. */
chan->hangupcause = AST_CAUSE_SWITCH_CONGESTION;
break;
default:
break;
}
chan->_softhangup |= AST_SOFTHANGUP_DEV;
res = 0;
break;
}
res = sig_pri_play_tone(p, SIG_PRI_TONE_CONGESTION);
if (p->call_level < SIG_PRI_CALL_LEVEL_ALERTING && !p->outgoing) {
/* There are many cause codes that generate an AST_CONTROL_CONGESTION. */
switch (chan->hangupcause) {
case AST_CAUSE_USER_BUSY:
case AST_CAUSE_NORMAL_CLEARING:
case 0:/* Cause has not been set. */
/* Supply a more appropriate cause. */
chan->hangupcause = AST_CAUSE_SWITCH_CONGESTION;
break;
default:
break;
}
p->progress = 1;/* No need to send plain PROGRESS after this. */
if (p->pri && p->pri->pri) {
pri_grab(p, p->pri);
#ifdef HAVE_PRI_PROG_W_CAUSE
pri_progress_with_cause(p->pri->pri, p->call, PVT_TO_CHANNEL(p), 1, chan->hangupcause);
#else
pri_progress(p->pri->pri,p->call, PVT_TO_CHANNEL(p), 1);
#endif
pri_rel(p->pri);
}
}
break;
case AST_CONTROL_HOLD:
if (p->pri && !strcasecmp(p->mohinterpret, "passthrough")) {
pri_grab(p, p->pri);
res = pri_notify(p->pri->pri, p->call, p->prioffset, PRI_NOTIFY_REMOTE_HOLD);
pri_rel(p->pri);
} else
ast_moh_start(chan, data, p->mohinterpret);
break;
case AST_CONTROL_UNHOLD:
if (p->pri && !strcasecmp(p->mohinterpret, "passthrough")) {
pri_grab(p, p->pri);
res = pri_notify(p->pri->pri, p->call, p->prioffset, PRI_NOTIFY_REMOTE_RETRIEVAL);
pri_rel(p->pri);
} else
ast_moh_stop(chan);
break;
case AST_CONTROL_SRCUPDATE:
res = 0;
break;
case -1:
res = sig_pri_play_tone(p, -1);
break;
case AST_CONTROL_CONNECTED_LINE:
ast_debug(1, "Received AST_CONTROL_CONNECTED_LINE on %s\n", chan->name);
if (p->pri) {
struct pri_party_connected_line connected;
pri_grab(p, p->pri);
memset(&connected, 0, sizeof(connected));
sig_pri_party_id_from_ast(&connected.id, &chan->connected.id);
pri_connected_line_update(p->pri->pri, p->call, &connected);
pri_rel(p->pri);
}
break;
case AST_CONTROL_REDIRECTING:
ast_debug(1, "Received AST_CONTROL_REDIRECTING on %s\n", chan->name);
if (p->pri) {
pri_grab(p, p->pri);
sig_pri_redirecting_update(p, chan);
pri_rel(p->pri);
}
break;
case AST_CONTROL_AOC:
#if defined(HAVE_PRI_AOC_EVENTS)
{
struct ast_aoc_decoded *decoded
= ast_aoc_decode((struct ast_aoc_encoded *) data, datalen, chan);
ast_debug(1, "Received AST_CONTROL_AOC on %s\n", chan->name);
if (decoded && p->pri) {
pri_grab(p, p->pri);
switch (ast_aoc_get_msg_type(decoded)) {
case AST_AOC_S:
if (p->pri->aoc_passthrough_flag & SIG_PRI_AOC_GRANT_S) {
sig_pri_aoc_s_from_ast(p, decoded);
}
break;
case AST_AOC_D:
if (p->pri->aoc_passthrough_flag & SIG_PRI_AOC_GRANT_D) {
sig_pri_aoc_d_from_ast(p, decoded);
}
break;
case AST_AOC_E:
if (p->pri->aoc_passthrough_flag & SIG_PRI_AOC_GRANT_E) {
sig_pri_aoc_e_from_ast(p, decoded);
}
/* if hangup was delayed for this AOC-E msg, waiting_for_aoc
* will be set. A hangup is already occuring via a timeout during
* this delay. Instead of waiting for that timeout to occur, go ahead
* and initiate the softhangup since the delay is no longer necessary */
if (p->waiting_for_aoce) {
p->waiting_for_aoce = 0;
ast_log(LOG_DEBUG,
"Received final AOC-E msg, continue with hangup on %s\n",
chan->name);
ast_softhangup_nolock(chan, AST_SOFTHANGUP_DEV);
}
break;
case AST_AOC_REQUEST:
/* We do not pass through AOC requests, So unless this
* is an AOC termination request it will be ignored */
if (ast_aoc_get_termination_request(decoded)) {
pri_hangup(p->pri->pri, p->call, -1);
}
break;
default:
break;
}
pri_rel(p->pri);
}
ast_aoc_destroy_decoded(decoded);
}
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
break;
}
return res;
}
| void sig_pri_init_pri | ( | struct sig_pri_span * | pri | ) |
Definition at line 6288 of file sig_pri.c.
References ast_mutex_init, AST_PTHREADT_NULL, sig_pri_span::fds, sig_pri_span::lock, sig_pri_span::master, and SIG_PRI_NUM_DCHANS.
Referenced by dahdi_restart(), and load_module().
{
int i;
memset(pri, 0, sizeof(*pri));
ast_mutex_init(&pri->lock);
pri->master = AST_PTHREADT_NULL;
for (i = 0; i < SIG_PRI_NUM_DCHANS; i++)
pri->fds[i] = -1;
}
| int sig_pri_is_chan_available | ( | struct sig_pri_chan * | pvt | ) |
Determine if a private channel structure is available.
- Since:
- 1.8
- Parameters:
-
pvt Channel to determine if available.
- Returns:
- TRUE if the channel is available.
Definition at line 1127 of file sig_pri.c.
References sig_pri_chan::service_status, and sig_pri_is_chan_in_use().
Referenced by dahdi_pri_update_span_devstate(), pri_dchannel(), pri_find_empty_chan(), pri_find_empty_nobch(), pri_fixup_principle(), sig_pri_available_check(), sig_pri_cli_show_channels(), and sig_pri_handle_retrieve().
{
return !sig_pri_is_chan_in_use(pvt)
#if defined(HAVE_PRI_SERVICE_MESSAGES)
/* And not out-of-service */
&& !pvt->service_status
#endif /* defined(HAVE_PRI_SERVICE_MESSAGES) */
;
}
| int sig_pri_load | ( | const char * | cc_type_name | ) |
Load the sig_pri submodule.
- Since:
- 1.8
- Parameters:
-
cc_type_name CC type name to use when looking up agent/monitor.
- Return values:
-
0 on success. -1 on error.
Definition at line 8498 of file sig_pri.c.
References ao2_container_alloc, sig_pri_cc_monitor_instance_cmp_fn(), sig_pri_cc_monitor_instance_hash_fn(), and sig_pri_cc_type_name.
Referenced by load_module().
{
#if defined(HAVE_PRI_CCSS)
sig_pri_cc_type_name = cc_type_name;
sig_pri_cc_monitors = ao2_container_alloc(37, sig_pri_cc_monitor_instance_hash_fn,
sig_pri_cc_monitor_instance_cmp_fn);
if (!sig_pri_cc_monitors) {
return -1;
}
#endif /* defined(HAVE_PRI_CCSS) */
return 0;
}
| struct ast_channel* sig_pri_request | ( | struct sig_pri_chan * | p, |
| enum sig_pri_law | law, | ||
| const struct ast_channel * | requestor, | ||
| int | transfercapability | ||
| ) | [read] |
Definition at line 981 of file sig_pri.c.
References ast_log(), AST_STATE_RESERVED, sig_pri_chan::channel, sig_pri_chan::exten, LOG_DEBUG, sig_pri_chan::outgoing, and sig_pri_new_ast_channel().
Referenced by dahdi_request(), and pri_dchannel().
{
struct ast_channel *ast;
ast_log(LOG_DEBUG, "%s %d\n", __FUNCTION__, p->channel);
p->outgoing = 1;
ast = sig_pri_new_ast_channel(p, AST_STATE_RESERVED, law, transfercapability, p->exten, requestor);
if (!ast) {
p->outgoing = 0;
}
return ast;
}
| void sig_pri_set_alarm | ( | struct sig_pri_chan * | p, |
| int | in_alarm | ||
| ) |
Definition at line 181 of file sig_pri.c.
References sig_pri_chan::calls, sig_pri_chan::chan_pvt, sig_pri_chan::inalarm, sig_pri_chan::resetting, and sig_pri_callback::set_alarm.
Referenced by mkintf(), pri_dchannel(), and sig_pri_chan_alarm_notify().
| int sig_pri_start_pri | ( | struct sig_pri_span * | pri | ) |
Definition at line 7483 of file sig_pri.c.
References ARRAY_LEN, AST_EVENT_IE_CONTEXT, AST_EVENT_IE_END, AST_EVENT_IE_MAILBOX, AST_EVENT_IE_PLTYPE_STR, AST_EVENT_MWI, ast_event_subscribe(), ast_event_unsubscribe(), ast_log(), ast_mutex_init, ast_pthread_create_background, ast_str_alloca, ast_str_buffer(), ast_str_set(), ast_strip(), ast_strlen_zero(), sig_pri_span::cc_ptmp_recall_mode, sig_pri_span::cc_qsig_signaling_link_req, sig_pri_span::cc_qsig_signaling_link_rsp, sig_pri_mbox::context, DAHDI_CHAN_MAPPING_LOGICAL, DAHDI_OVERLAPDIAL_OUTGOING, sig_pri_span::dchans, sig_pri_span::enable_service_message_support, errno, sig_pri_span::fds, sig_pri_span::inbanddisconnect, sig_pri_span::lock, LOG_ERROR, sig_pri_span::master, sig_pri_span::mbox, sig_pri_span::mwi_mailboxes, sig_pri_span::nodetype, sig_pri_span::nsf, sig_pri_mbox::number, sig_pri_span::overlapdial, sig_pri_span::pri, pri_dchannel(), sig_pri_span::pritimers, sig_pri_span::qsigchannelmapping, sig_pri_span::resetpos, sig_pri_span::sig, SIG_BRI, SIG_BRI_PTMP, sig_pri_cc_type_name, SIG_PRI_DEBUG_DEFAULT, sig_pri_mwi_cache_update(), sig_pri_mwi_event_cb(), SIG_PRI_NUM_DCHANS, sig_pri_sort_pri_chans(), sig_pri_span::span, strsep(), sig_pri_mbox::sub, and sig_pri_span::switchtype.
Referenced by setup_dahdi_int().
{
int x;
int i;
#if defined(HAVE_PRI_MWI)
char *saveptr;
char *mbox_number;
char *mbox_context;
struct ast_str *mwi_description = ast_str_alloca(64);
#endif /* defined(HAVE_PRI_MWI) */
#if defined(HAVE_PRI_MWI)
/* Prepare the mbox[] for use. */
for (i = 0; i < ARRAY_LEN(pri->mbox); ++i) {
if (pri->mbox[i].sub) {
pri->mbox[i].sub = ast_event_unsubscribe(pri->mbox[i].sub);
}
}
#endif /* defined(HAVE_PRI_MWI) */
ast_mutex_init(&pri->lock);
sig_pri_sort_pri_chans(pri);
#if defined(HAVE_PRI_MWI)
/*
* Split the mwi_mailboxes configuration string into the mbox[]:
* mailbox_number[@context]{,mailbox_number[@context]}
*/
i = 0;
saveptr = pri->mwi_mailboxes;
while (i < ARRAY_LEN(pri->mbox)) {
mbox_number = strsep(&saveptr, ",");
if (!mbox_number) {
break;
}
/* Split the mailbox_number and context */
mbox_context = strchr(mbox_number, '@');
if (mbox_context) {
*mbox_context++ = '\0';
mbox_context = ast_strip(mbox_context);
}
mbox_number = ast_strip(mbox_number);
if (ast_strlen_zero(mbox_number)) {
/* There is no mailbox number. Skip it. */
continue;
}
if (ast_strlen_zero(mbox_context)) {
/* There was no context so use the default. */
mbox_context = "default";
}
/* Fill the mbox[] element. */
ast_str_set(&mwi_description, -1, "%s span %d[%d] MWI mailbox %s@%s",
sig_pri_cc_type_name, pri->span, i, mbox_number, mbox_context);
pri->mbox[i].sub = ast_event_subscribe(AST_EVENT_MWI, sig_pri_mwi_event_cb,
ast_str_buffer(mwi_description), pri,
AST_EVENT_IE_MAILBOX, AST_EVENT_IE_PLTYPE_STR, mbox_number,
AST_EVENT_IE_CONTEXT, AST_EVENT_IE_PLTYPE_STR, mbox_context,
AST_EVENT_IE_END);
if (!pri->mbox[i].sub) {
ast_log(LOG_ERROR, "%s span %d could not subscribe to MWI events for %s@%s.",
sig_pri_cc_type_name, pri->span, mbox_number, mbox_context);
continue;
}
pri->mbox[i].number = mbox_number;
pri->mbox[i].context = mbox_context;
++i;
}
#endif /* defined(HAVE_PRI_MWI) */
for (i = 0; i < SIG_PRI_NUM_DCHANS; i++) {
if (pri->fds[i] == -1) {
break;
}
switch (pri->sig) {
case SIG_BRI:
pri->dchans[i] = pri_new_bri(pri->fds[i], 1, pri->nodetype, pri->switchtype);
break;
case SIG_BRI_PTMP:
pri->dchans[i] = pri_new_bri(pri->fds[i], 0, pri->nodetype, pri->switchtype);
break;
default:
pri->dchans[i] = pri_new(pri->fds[i], pri->nodetype, pri->switchtype);
#if defined(HAVE_PRI_SERVICE_MESSAGES)
if (pri->enable_service_message_support) {
pri_set_service_message_support(pri->dchans[i], 1);
}
#endif /* defined(HAVE_PRI_SERVICE_MESSAGES) */
break;
}
pri_set_overlapdial(pri->dchans[i], (pri->overlapdial & DAHDI_OVERLAPDIAL_OUTGOING) ? 1 : 0);
#ifdef HAVE_PRI_PROG_W_CAUSE
pri_set_chan_mapping_logical(pri->dchans[i], pri->qsigchannelmapping == DAHDI_CHAN_MAPPING_LOGICAL);
#endif
#ifdef HAVE_PRI_INBANDDISCONNECT
pri_set_inbanddisconnect(pri->dchans[i], pri->inbanddisconnect);
#endif
/* Enslave to master if appropriate */
if (i)
pri_enslave(pri->dchans[0], pri->dchans[i]);
if (!pri->dchans[i]) {
if (pri->fds[i] > 0)
close(pri->fds[i]);
pri->fds[i] = -1;
ast_log(LOG_ERROR, "Unable to create PRI structure\n");
return -1;
}
pri_set_debug(pri->dchans[i], SIG_PRI_DEBUG_DEFAULT);
pri_set_nsf(pri->dchans[i], pri->nsf);
#ifdef PRI_GETSET_TIMERS
for (x = 0; x < PRI_MAX_TIMERS; x++) {
if (pri->pritimers[x] != 0)
pri_set_timer(pri->dchans[i], x, pri->pritimers[x]);
}
#endif
}
/* Assume primary is the one we use */
pri->pri = pri->dchans[0];
#if defined(HAVE_PRI_CALL_HOLD)
pri_hold_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_CALL_HOLD) */
#if defined(HAVE_PRI_CALL_REROUTING)
pri_reroute_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_CALL_REROUTING) */
#if defined(HAVE_PRI_HANGUP_FIX)
pri_hangup_fix_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_HANGUP_FIX) */
#if defined(HAVE_PRI_CCSS)
pri_cc_enable(pri->pri, 1);
pri_cc_recall_mode(pri->pri, pri->cc_ptmp_recall_mode);
pri_cc_retain_signaling_req(pri->pri, pri->cc_qsig_signaling_link_req);
pri_cc_retain_signaling_rsp(pri->pri, pri->cc_qsig_signaling_link_rsp);
#endif /* defined(HAVE_PRI_CCSS) */
#if defined(HAVE_PRI_TRANSFER)
pri_transfer_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_TRANSFER) */
#if defined(HAVE_PRI_AOC_EVENTS)
pri_aoc_events_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_AOC_EVENTS) */
#if defined(HAVE_PRI_CALL_WAITING)
pri_connect_ack_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_CALL_WAITING) */
#if defined(HAVE_PRI_MCID)
pri_mcid_enable(pri->pri, 1);
#endif /* defined(HAVE_PRI_MCID) */
#if defined(HAVE_PRI_L2_PERSISTENCE)
pri_persistent_layer2_option(pri->pri, pri->l2_persistence);
#endif /* defined(HAVE_PRI_L2_PERSISTENCE) */
pri->resetpos = -1;
if (ast_pthread_create_background(&pri->master, NULL, pri_dchannel, pri)) {
for (i = 0; i < SIG_PRI_NUM_DCHANS; i++) {
if (!pri->dchans[i])
break;
if (pri->fds[i] > 0)
close(pri->fds[i]);
pri->fds[i] = -1;
}
ast_log(LOG_ERROR, "Unable to spawn D-channel: %s\n", strerror(errno));
return -1;
}
#if defined(HAVE_PRI_MWI)
/*
* Send the initial MWI indications from the event cache for this span.
*
* If we were loaded after app_voicemail the event would already be in
* the cache. If we were loaded before app_voicemail the event would not
* be in the cache yet and app_voicemail will send the event when it
* gets loaded.
*/
sig_pri_mwi_cache_update(pri);
#endif /* defined(HAVE_PRI_MWI) */
return 0;
}
| void sig_pri_stop_pri | ( | struct sig_pri_span * | pri | ) |
Stop PRI span.
- Since:
- 1.8
- Parameters:
-
pri PRI span control structure.
- Returns:
- Nothing
Definition at line 7418 of file sig_pri.c.
References ARRAY_LEN, ast_event_unsubscribe(), sig_pri_span::mbox, and sig_pri_mbox::sub.
Referenced by __unload_module().
| void sig_pri_unload | ( | void | ) |
Unload the sig_pri submodule.
- Since:
- 1.8
- Returns:
- Nothing
Definition at line 8517 of file sig_pri.c.
References ao2_ref.
Referenced by __unload_module().
{
#if defined(HAVE_PRI_CCSS)
if (sig_pri_cc_monitors) {
ao2_ref(sig_pri_cc_monitors, -1);
sig_pri_cc_monitors = NULL;
}
#endif /* defined(HAVE_PRI_CCSS) */
}
Variable Documentation
const char dahdi_db[] = "dahdi/registry" [static] |
The AstDB family.
Definition at line 194 of file sig_pri.h.
Referenced by destroy_all_channels(), handle_pri_service_generic(), mkintf(), and pri_dchannel().
