BRepFeat_MakePipe Class Reference

Constructs compound shapes with pipe
features. These can be depressions or protrusions.
The semantics of pipe feature creation is based on the construction of shapes:
More...

#include <BRepFeat_MakePipe.hxx>

Inheritance diagram for BRepFeat_MakePipe:

Public Member Functions
void *	operator new (size_t, void *anAddress)
void *	operator new (size_t size)
void	operator delete (void *anAddress)
	BRepFeat_MakePipe ()
	initializes the pipe class.
	BRepFeat_MakePipe (const TopoDS_Shape &Sbase, const TopoDS_Shape &Pbase, const TopoDS_Face &Skface, const TopoDS_Wire &Spine, const Standard_Integer Fuse, const Standard_Boolean Modify)
	A face Pbase is selected in the shape Sbase to serve as the basis for the pipe. It will be defined by the wire Spine. Fuse offers a choice between:
void	Init (const TopoDS_Shape &Sbase, const TopoDS_Shape &Pbase, const TopoDS_Face &Skface, const TopoDS_Wire &Spine, const Standard_Integer Fuse, const Standard_Boolean Modify)
	Initializes this algorithm for adding pipes to shapes. A face Pbase is selected in the shape Sbase to serve as the basis for the pipe. It will be defined by the wire Spine. Fuse offers a choice between:
void	Add (const TopoDS_Edge &E, const TopoDS_Face &OnFace)
	Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape.
void	Perform ()
void	Perform (const TopoDS_Shape &Until)
void	Perform (const TopoDS_Shape &From, const TopoDS_Shape &Until)
	Assigns one of the following semantics
void	Curves (TColGeom_SequenceOfCurve &S)
Handle_Geom_Curve	BarycCurve ()

---

Detailed Description

• along a length
  
• up to a limiting face
  
• from a limiting face to a height.
  The shape defining construction of the pipe feature can be either the supporting edge or
  the concerned area of a face.
  In case of the supporting edge, this contour
  can be attached to a face of the basis shape
  by binding. When the contour is bound to this
  face, the information that the contour will
  slide on the face becomes available to the relevant class methods.
  In case of the concerned area of a face, you
  could, for example, cut it out and move it to a
  different height which will define the limiting
  face of a protrusion or depression.
  

---

Constructor & Destructor Documentation

BRepFeat_MakePipe::BRepFeat_MakePipe

(

)

BRepFeat_MakePipe::BRepFeat_MakePipe	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Shape &	Pbase,
		const TopoDS_Face &	Skface,
		const TopoDS_Wire &	Spine,
		const Standard_Integer	Fuse,
		const Standard_Boolean	Modify
	)

• removing matter with a Boolean cut using the setting 0
  
• adding matter with Boolean fusion using the setting 1.
  The sketch face Skface serves to determine
  the type of operation. If it is inside the basis
  shape, a local operation such as glueing can be performed.
  

---

Member Function Documentation

void BRepFeat_MakePipe::Add	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	OnFace
	)

Handle_Geom_Curve BRepFeat_MakePipe::BarycCurve

(

)

[virtual]

Implements BRepFeat_Form.

void BRepFeat_MakePipe::Curves

(

TColGeom_SequenceOfCurve &

S

)

[virtual]

Implements BRepFeat_Form.

void BRepFeat_MakePipe::Init	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Shape &	Pbase,
		const TopoDS_Face &	Skface,
		const TopoDS_Wire &	Spine,
		const Standard_Integer	Fuse,
		const Standard_Boolean	Modify
	)

• removing matter with a Boolean cut using the setting 0
  
• adding matter with Boolean fusion using the setting 1.
  The sketch face Skface serves to determine
  the type of operation. If it is inside the basis
  shape, a local operation such as glueing can be performed.
  

void BRepFeat_MakePipe::operator delete

(

void *

anAddress

)

[inline]

Reimplemented from BRepFeat_Form.

void* BRepFeat_MakePipe::operator new

(

size_t

size

)

[inline]

Reimplemented from BRepFeat_Form.

void* BRepFeat_MakePipe::operator new	(	size_t	,
		void *	anAddress
	)		[inline]

Reimplemented from BRepFeat_Form.

void BRepFeat_MakePipe::Perform

(

const TopoDS_Shape &

Until

)

void BRepFeat_MakePipe::Perform	(	const TopoDS_Shape &	From,
		const TopoDS_Shape &	Until
	)

• to a face Until
  
• from a face From to a height Until.
  Reconstructs the feature topologically according to the semantic option chosen.
  

void BRepFeat_MakePipe::Perform

(

)

---

The documentation for this class was generated from the following file:

• BRepFeat_MakePipe.hxx