GeomAPI_PointsToBSplineSurface Class Reference

This class is used to approximate or interpolate
a BSplineSurface passing through an Array2 of
points, with a given continuity.
Describes functions for building a BSpline
surface which approximates or interpolates a set of points.
A PointsToBSplineSurface object provides a framework for:
More...

#include <GeomAPI_PointsToBSplineSurface.hxx>

Public Member Functions
void *	operator new (size_t, void *anAddress)
void *	operator new (size_t size)
void	operator delete (void *anAddress)
	GeomAPI_PointsToBSplineSurface ()
	Constructs an empty algorithm for approximation or interpolation of a surface. Use:
	GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D
	GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D
	GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of points using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion
	GeomAPI_PointsToBSplineSurface (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Points. The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) ) The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );
void	Init (const TColgp_Array2OfPnt &Points, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D
void	Interpolate (const TColgp_Array2OfPnt &Points)
	Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2.
void	Interpolate (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType)
	Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2.
void	Init (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Points. The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) ) The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );
void	Interpolate (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY)
	Interpolates a BSpline Surface passing through an array of Points. The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) ) The resulting BSpline will have the following properties: 1- his degree will be 3 2- his continuity will be C2. 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );
void	Init (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D
void	Init (const TColgp_Array2OfPnt &Points, const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
	Approximates a BSpline Surface passing through an array of point using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion
const Handle_Geom_BSplineSurface &	Surface () const
	Returns the approximate BSpline Surface
	operator Handle< Geom_BSplineSurface > () const
Standard_Boolean	IsDone () const

---

Detailed Description

• defining the data of the BSpline surface to be built,
  
• implementing the approximation algorithm
  or the interpolation algorithm, and consulting the results.
  

---

Constructor & Destructor Documentation

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface

(

)

• an Init function to define and build the
  BSpline surface by approximation, or
  
• an Interpolate function to define and build
  the BSpline surface by interpolation.
  

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface	(	const TColgp_Array2OfPnt &	Points,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface	(	const TColgp_Array2OfPnt &	Points,
		const Approx_ParametrizationType	ParType,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface	(	const TColgp_Array2OfPnt &	Points,
		const Standard_Real	Weight1,
		const Standard_Real	Weight2,
		const Standard_Real	Weight3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface	(	const TColStd_Array2OfReal &	ZPoints,
		const Standard_Real	X0,
		const Standard_Real	dX,
		const Standard_Real	Y0,
		const Standard_Real	dY,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

---

Member Function Documentation

void GeomAPI_PointsToBSplineSurface::Init	(	const TColgp_Array2OfPnt &	Points,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

void GeomAPI_PointsToBSplineSurface::Init	(	const TColgp_Array2OfPnt &	Points,
		const Approx_ParametrizationType	ParType,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

void GeomAPI_PointsToBSplineSurface::Init	(	const TColgp_Array2OfPnt &	Points,
		const Standard_Real	Weight1,
		const Standard_Real	Weight2,
		const Standard_Real	Weight3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

void GeomAPI_PointsToBSplineSurface::Init	(	const TColStd_Array2OfReal &	ZPoints,
		const Standard_Real	X0,
		const Standard_Real	dX,
		const Standard_Real	Y0,
		const Standard_Real	dY,
		const Standard_Integer	DegMin = 3,
		const Standard_Integer	DegMax = 8,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Real	Tol3D = 1.0e-3
	)

void GeomAPI_PointsToBSplineSurface::Interpolate

(

const TColgp_Array2OfPnt &

Points

)

void GeomAPI_PointsToBSplineSurface::Interpolate	(	const TColStd_Array2OfReal &	ZPoints,
		const Standard_Real	X0,
		const Standard_Real	dX,
		const Standard_Real	Y0,
		const Standard_Real	dY
	)

void GeomAPI_PointsToBSplineSurface::Interpolate	(	const TColgp_Array2OfPnt &	Points,
		const Approx_ParametrizationType	ParType
	)

Standard_Boolean GeomAPI_PointsToBSplineSurface::IsDone

(

)

const

void GeomAPI_PointsToBSplineSurface::operator delete

(

void *

anAddress

)

[inline]

GeomAPI_PointsToBSplineSurface::operator Handle< Geom_BSplineSurface >

(

)

const

void* GeomAPI_PointsToBSplineSurface::operator new	(	size_t	,
		void *	anAddress
	)		[inline]

void* GeomAPI_PointsToBSplineSurface::operator new

(

size_t

size

)

[inline]

const Handle_Geom_BSplineSurface& GeomAPI_PointsToBSplineSurface::Surface

(

)

const

---

The documentation for this class was generated from the following file:

• GeomAPI_PointsToBSplineSurface.hxx