sig_pri.h

Go to the documentation of this file.

#ifndef _SIG_PRI_H
#define _SIG_PRI_H
/*
 * Asterisk -- An open source telephony toolkit.
 *
 * Copyright (C) 1999 - 2009, Digium, Inc.
 *
 * Mark Spencer <markster@digium.com>
 *
 * See http://www.asterisk.org for more information about
 * the Asterisk project. Please do not directly contact
 * any of the maintainers of this project for assistance;
 * the project provides a web site, mailing lists and IRC
 * channels for your use.
 *
 * This program is free software, distributed under the terms of
 * the GNU General Public License Version 2. See the LICENSE file
 * at the top of the source tree.
 */

/*! \file
 *
 * \brief Interface header for PRI signaling module
 *
 * \author Matthew Fredrickson <creslin@digium.com>
 */

#include "asterisk/channel.h"
#include "asterisk/frame.h"
#include "asterisk/event.h"
#include "asterisk/ccss.h"
#include <libpri.h>
#include <dahdi/user.h>

#if defined(HAVE_PRI_CCSS)
/*! PRI debug message flags when normal PRI debugging is turned on at the command line. */
#define SIG_PRI_DEBUG_NORMAL  \
   (PRI_DEBUG_APDU | PRI_DEBUG_Q931_STATE | PRI_DEBUG_Q921_STATE | PRI_DEBUG_CC)
#else

/*! PRI debug message flags when normal PRI debugging is turned on at the command line. */
#define SIG_PRI_DEBUG_NORMAL  \
   (PRI_DEBUG_APDU | PRI_DEBUG_Q931_STATE | PRI_DEBUG_Q921_STATE)
#endif   /* !defined(HAVE_PRI_CCSS) */

#if 0
/*! PRI debug message flags set on initial startup. */
#define SIG_PRI_DEBUG_DEFAULT (SIG_PRI_DEBUG_NORMAL | PRI_DEBUG_Q931_DUMP)
#else
/*! PRI debug message flags set on initial startup. */
#define SIG_PRI_DEBUG_DEFAULT 0
#endif

#define SIG_PRI_AOC_GRANT_S    (1 << 0)
#define SIG_PRI_AOC_GRANT_D    (1 << 1)
#define SIG_PRI_AOC_GRANT_E    (1 << 2)

enum sig_pri_tone {
   SIG_PRI_TONE_RINGTONE = 0,
   SIG_PRI_TONE_STUTTER,
   SIG_PRI_TONE_CONGESTION,
   SIG_PRI_TONE_DIALTONE,
   SIG_PRI_TONE_DIALRECALL,
   SIG_PRI_TONE_INFO,
   SIG_PRI_TONE_BUSY,
};

enum sig_pri_law {
   SIG_PRI_DEFLAW = 0,
   SIG_PRI_ULAW,
   SIG_PRI_ALAW
};

enum sig_pri_moh_signaling {
   /*! Generate MOH to the remote party. */
   SIG_PRI_MOH_SIGNALING_MOH,
   /*! Send hold notification signaling to the remote party. */
   SIG_PRI_MOH_SIGNALING_NOTIFY,
#if defined(HAVE_PRI_CALL_HOLD)
   /*! Use HOLD/RETRIEVE signaling to release the B channel while on hold. */
   SIG_PRI_MOH_SIGNALING_HOLD,
#endif   /* defined(HAVE_PRI_CALL_HOLD) */
};

enum sig_pri_moh_state {
   /*! Bridged peer has not put us on hold. */
   SIG_PRI_MOH_STATE_IDLE,
   /*! Bridged peer has put us on hold and we were to notify the remote party. */
   SIG_PRI_MOH_STATE_NOTIFY,
   /*! Bridged peer has put us on hold and we were to play MOH or HOLD/RETRIEVE fallback. */
   SIG_PRI_MOH_STATE_MOH,
#if defined(HAVE_PRI_CALL_HOLD)
   /*! Requesting to put channel on hold. */
   SIG_PRI_MOH_STATE_HOLD_REQ,
   /*! Trying to go on hold when bridged peer requested to unhold. */
   SIG_PRI_MOH_STATE_PEND_UNHOLD,
   /*! Channel is held. */
   SIG_PRI_MOH_STATE_HOLD,
   /*! Requesting to take channel out of hold. */
   SIG_PRI_MOH_STATE_RETRIEVE_REQ,
   /*! Trying to take channel out of hold when bridged peer requested to hold. */
   SIG_PRI_MOH_STATE_PEND_HOLD,
   /*! Failed to take the channel out of hold. No B channels were available? */
   SIG_PRI_MOH_STATE_RETRIEVE_FAIL,
#endif   /* defined(HAVE_PRI_CALL_HOLD) */

   /*! Number of MOH states.  Must be last in enum. */
   SIG_PRI_MOH_STATE_NUM
};

enum sig_pri_moh_event {
   /*! Reset the MOH state machine. (Because of hangup.) */
   SIG_PRI_MOH_EVENT_RESET,
   /*! Bridged peer placed this channel on hold. */
   SIG_PRI_MOH_EVENT_HOLD,
   /*! Bridged peer took this channel off hold. */
   SIG_PRI_MOH_EVENT_UNHOLD,
#if defined(HAVE_PRI_CALL_HOLD)
   /*! The hold request was successfully acknowledged. */
   SIG_PRI_MOH_EVENT_HOLD_ACK,
   /*! The hold request was rejected. */
   SIG_PRI_MOH_EVENT_HOLD_REJ,
   /*! The unhold request was successfully acknowledged. */
   SIG_PRI_MOH_EVENT_RETRIEVE_ACK,
   /*! The unhold request was rejected. */
   SIG_PRI_MOH_EVENT_RETRIEVE_REJ,
   /*! The remote party took this channel off hold. */
   SIG_PRI_MOH_EVENT_REMOTE_RETRIEVE_ACK,
#endif   /* defined(HAVE_PRI_CALL_HOLD) */

   /*! Number of MOH events.  Must be last in enum. */
   SIG_PRI_MOH_EVENT_NUM
};

/*! Call establishment life cycle level for simple comparisons. */
enum sig_pri_call_level {
   /*! Call does not exist. */
   SIG_PRI_CALL_LEVEL_IDLE,
   /*! Call is present but has no response yet. (SETUP) */
   SIG_PRI_CALL_LEVEL_SETUP,
   /*! Call is collecting digits for overlap dialing. (SETUP ACKNOWLEDGE) */
   SIG_PRI_CALL_LEVEL_OVERLAP,
   /*! Call routing is happening. (PROCEEDING) */
   SIG_PRI_CALL_LEVEL_PROCEEDING,
   /*! Called party is being alerted of the call. (ALERTING) */
   SIG_PRI_CALL_LEVEL_ALERTING,
   /*! Call is dialing 'w' deferred digits. (CONNECT) */
   SIG_PRI_CALL_LEVEL_DEFER_DIAL,
   /*! Call is connected/answered. (CONNECT) */
   SIG_PRI_CALL_LEVEL_CONNECT,
};

enum sig_pri_reset_state {
   /*! \brief The channel is not being RESTARTed. */
   SIG_PRI_RESET_IDLE,
   /*!
    * \brief The channel is being RESTARTed.
    * \note Waiting for a RESTART ACKNOWLEDGE from the peer.
    */
   SIG_PRI_RESET_ACTIVE,
   /*!
    * \brief Peer may not be sending the expected RESTART ACKNOWLEDGE.
    *
    * \details We have already received a SETUP on this channel.
    * If another SETUP comes in on this channel then the peer
    * considers this channel useable.  Assume that the peer is
    * never going to give us a RESTART ACKNOWLEDGE and assume that
    * we have received one.  This is not according to Q.931, but
    * some peers occasionally fail to send a RESTART ACKNOWLEDGE.
    */
   SIG_PRI_RESET_NO_ACK,
};

struct sig_pri_span;

struct sig_pri_callback {
   /* Unlock the private in the signalling private structure.  This is used for three way calling madness. */
   void (* const unlock_private)(void *pvt);
   /* Lock the private in the signalling private structure.  ... */
   void (* const lock_private)(void *pvt);
   /* Do deadlock avoidance for the private signaling structure lock.  */
   void (* const deadlock_avoidance_private)(void *pvt);
   /* Function which is called back to handle any other DTMF events that are received.  Called by analog_handle_event.  Why is this
    * important to use, instead of just directly using events received before they are passed into the library?  Because sometimes,
    * (CWCID) the library absorbs DTMF events received. */
   //void (* const handle_dtmf)(void *pvt, struct ast_channel *ast, enum analog_sub analog_index, struct ast_frame **dest);

   //int (* const dial_digits)(void *pvt, enum analog_sub sub, struct analog_dialoperation *dop);
   int (* const play_tone)(void *pvt, enum sig_pri_tone tone);

   int (* const set_echocanceller)(void *pvt, int enable);
   int (* const train_echocanceller)(void *pvt);
   int (* const dsp_reset_and_flush_digits)(void *pvt);

   struct ast_channel * (* const new_ast_channel)(void *pvt, int state, enum sig_pri_law law, char *exten, const struct ast_channel *chan);

   void (* const fixup_chans)(void *old_chan, void *new_chan);

   /* Note: Called with PRI lock held */
   void (* const handle_dchan_exception)(struct sig_pri_span *pri, int index);
   void (* const set_alarm)(void *pvt, int in_alarm);
   void (* const set_dialing)(void *pvt, int is_dialing);
   void (* const set_digital)(void *pvt, int is_digital);
   void (* const set_outgoing)(void *pvt, int is_outgoing);
   void (* const set_callerid)(void *pvt, const struct ast_party_caller *caller);
   void (* const set_dnid)(void *pvt, const char *dnid);
   void (* const set_rdnis)(void *pvt, const char *rdnis);
   void (* const queue_control)(void *pvt, int subclass);
   int (* const new_nobch_intf)(struct sig_pri_span *pri);
   void (* const init_config)(void *pvt, struct sig_pri_span *pri);
   const char *(* const get_orig_dialstring)(void *pvt);
   void (* const make_cc_dialstring)(void *pvt, char *buf, size_t buf_size);
   void (* const update_span_devstate)(struct sig_pri_span *pri);
   void (* const dial_digits)(void *pvt, const char *dial_string);

   void (* const open_media)(void *pvt);

   /*!
    * \brief Post an AMI B channel association event.
    *
    * \param pvt Private structure of the user of this module.
    * \param chan Channel associated with the private pointer
    *
    * \return Nothing
    */
   void (* const ami_channel_event)(void *pvt, struct ast_channel *chan);

   /*! Reference the parent module. */
   void (*module_ref)(void);
   /*! Unreference the parent module. */
   void (*module_unref)(void);
};

/*! Global sig_pri callbacks to the upper layer. */
extern struct sig_pri_callback sig_pri_callbacks;

#define SIG_PRI_NUM_DCHANS    4     /*!< No more than 4 d-channels */
#define SIG_PRI_MAX_CHANNELS  672      /*!< No more than a DS3 per trunk group */

#define SIG_PRI      DAHDI_SIG_CLEAR
#define SIG_BRI      (0x2000000 | DAHDI_SIG_CLEAR)
#define SIG_BRI_PTMP (0X4000000 | DAHDI_SIG_CLEAR)

/* QSIG channel mapping option types */
#define DAHDI_CHAN_MAPPING_PHYSICAL 0
#define DAHDI_CHAN_MAPPING_LOGICAL  1

/* Overlap dialing option types */
#define DAHDI_OVERLAPDIAL_NONE 0
#define DAHDI_OVERLAPDIAL_OUTGOING 1
#define DAHDI_OVERLAPDIAL_INCOMING 2
#define DAHDI_OVERLAPDIAL_BOTH (DAHDI_OVERLAPDIAL_INCOMING|DAHDI_OVERLAPDIAL_OUTGOING)

#if defined(HAVE_PRI_SERVICE_MESSAGES)
/*! \brief Persistent Service State */
#define SRVST_DBKEY "service-state"
/*! \brief The out-of-service SERVICE state */
#define SRVST_TYPE_OOS "O"
/*! \brief SRVST_INITIALIZED is used to indicate a channel being out-of-service
 *  The SRVST_INITIALIZED is mostly used maintain backwards compatibility but also may
 *  mean that the channel has not yet received a RESTART message.  If a channel is
 *  out-of-service with this reason a RESTART message will result in the channel
 *  being put into service. */
#define SRVST_INITIALIZED 0
/*! \brief SRVST_NEAREND is used to indicate that the near end was put out-of-service */
#define SRVST_NEAREND  (1 << 0)
/*! \brief SRVST_FAREND is used to indicate that the far end was taken out-of-service */
#define SRVST_FAREND   (1 << 1)
/*! \brief SRVST_BOTH is used to indicate that both sides of the channel are out-of-service */
#define SRVST_BOTH (SRVST_NEAREND | SRVST_FAREND)

/*! \brief The AstDB family */
static const char dahdi_db[] = "dahdi/registry";
#endif   /* defined(HAVE_PRI_SERVICE_MESSAGES) */

struct sig_pri_chan {
   /* Options to be set by user */
   unsigned int hidecallerid:1;
   unsigned int hidecalleridname:1;      /*!< Hide just the name not the number for legacy PBX use */
   unsigned int immediate:1;        /*!< Answer before getting digits? */
   unsigned int priexclusive:1;        /*!< Whether or not to override and use exculsive mode for channel selection */
   unsigned int priindication_oob:1;
   unsigned int use_callerid:1;        /*!< Whether or not to use caller id on this channel */
   unsigned int use_callingpres:1;        /*!< Whether to use the callingpres the calling switch sends */
   char context[AST_MAX_CONTEXT];
   char mohinterpret[MAX_MUSICCLASS];
   int stripmsd;
   int channel;               /*!< Channel Number or CRV */

   /* Options to be checked by user */
   int cid_ani2;                 /*!< Automatic Number Identification number (Alternate PRI caller ID number) */
   int cid_ton;               /*!< Type Of Number (TON) */
   int callingpres;           /*!< The value of calling presentation that we're going to use when placing a PRI call */
   char cid_num[AST_MAX_EXTENSION];
   char cid_subaddr[AST_MAX_EXTENSION];
   char cid_name[AST_MAX_EXTENSION];
   char cid_ani[AST_MAX_EXTENSION];
   /*! \brief User tag for party id's sent from this device driver. */
   char user_tag[AST_MAX_EXTENSION];
   char exten[AST_MAX_EXTENSION];

   /* Internal variables -- Don't touch */
   /* Probably will need DS0 number, DS1 number, and a few other things */
   char dialdest[256];           /* Queued up digits for overlap dialing.  They will be sent out as information messages when setup ACK is received */
#if defined(HAVE_PRI_SETUP_KEYPAD)
   /*! \brief Keypad digits that came in with the SETUP message. */
   char keypad_digits[AST_MAX_EXTENSION];
#endif   /* defined(HAVE_PRI_SETUP_KEYPAD) */
   /*! 'w' deferred dialing digits. */
   char deferred_digits[AST_MAX_EXTENSION];
   /*! Music class suggested with AST_CONTROL_HOLD. */
   char moh_suggested[MAX_MUSICCLASS];
   enum sig_pri_moh_state moh_state;

#if defined(HAVE_PRI_AOC_EVENTS)
   struct pri_subcmd_aoc_e aoc_e;
   int aoc_s_request_invoke_id;     /*!< If an AOC-S request was present for the call, this is the invoke_id to use for the response */
   unsigned int aoc_s_request_invoke_id_valid:1; /*!< This is set when the AOC-S invoke id is present */
   unsigned int waiting_for_aoce:1; /*!< Delaying hangup for AOC-E msg. If this is set and AOC-E is received, continue with hangup before timeout period. */
   unsigned int holding_aoce:1;     /*!< received AOC-E msg from asterisk. holding for disconnect/release */
#endif   /* defined(HAVE_PRI_AOC_EVENTS) */
   unsigned int inalarm:1;
   unsigned int alreadyhungup:1; /*!< TRUE if the call has already gone/hungup */
   unsigned int isidlecall:1;    /*!< TRUE if this is an idle call */
   unsigned int progress:1;      /*!< TRUE if the call has seen inband-information progress through the network */

   /*!
    * \brief TRUE when this channel is allocated.
    *
    * \details
    * Needed to hold an outgoing channel allocation before the
    * owner pointer is created.
    *
    * \note This is one of several items to check to see if a
    * channel is available for use.
    */
   unsigned int allocated:1;
   unsigned int outgoing:1;
   unsigned int digital:1;
   /*! \brief TRUE if this interface has no B channel.  (call hold and call waiting) */
   unsigned int no_b_channel:1;
#if defined(HAVE_PRI_CALL_WAITING)
   /*! \brief TRUE if this is a call waiting call */
   unsigned int is_call_waiting:1;
#endif   /* defined(HAVE_PRI_CALL_WAITING) */

   struct ast_channel *owner;

   struct sig_pri_span *pri;
   q931_call *call;           /*!< opaque libpri call control structure */

   /*! Call establishment life cycle level for simple comparisons. */
   enum sig_pri_call_level call_level;
   /*! \brief Channel reset/restart state. */
   enum sig_pri_reset_state resetting;
   int prioffset;             /*!< channel number in span */
   int logicalspan;           /*!< logical span number within trunk group */
   int mastertrunkgroup;         /*!< what trunk group is our master */
#if defined(HAVE_PRI_SERVICE_MESSAGES)
   /*! \brief Active SRVST_DBKEY out-of-service status value. */
   unsigned service_status;
#endif   /* defined(HAVE_PRI_SERVICE_MESSAGES) */

   void *chan_pvt;               /*!< Private structure of the user of this module. */
#if defined(HAVE_PRI_REVERSE_CHARGE)
   /*!
    * \brief Reverse charging indication
    * \details
    * -1 - No reverse charging,
    *  1 - Reverse charging,
    * 0,2-7 - Reserved for future use
    */
   int reverse_charging_indication;
#endif
};

#if defined(HAVE_PRI_MWI)
/*! Maximum number of mailboxes per span. */
#define SIG_PRI_MAX_MWI_MAILBOXES         8
/*! Typical maximum length of mwi voicemail controlling number */
#define SIG_PRI_MAX_MWI_VM_NUMBER_LEN     10 /* digits in number */
/*! Typical maximum length of mwi mailbox number */
#define SIG_PRI_MAX_MWI_MBOX_NUMBER_LEN      10 /* digits in number */
/*! Typical maximum length of mwi mailbox context */
#define SIG_PRI_MAX_MWI_CONTEXT_LEN       10
/*!
 * \brief Maximum mwi_vm_numbers string length.
 * \details
 * max_length = #mailboxes * (vm_number + ',')
 * The last ',' is a null terminator instead.
 */
#define SIG_PRI_MAX_MWI_VM_NUMBER_STR  (SIG_PRI_MAX_MWI_MAILBOXES \
   * (SIG_PRI_MAX_MWI_VM_NUMBER_LEN + 1))
/*!
 * \brief Maximum mwi_mailboxs string length.
 * \details
 * max_length = #mailboxes * (mbox_number + '@' + context + ',')
 * The last ',' is a null terminator instead.
 */
#define SIG_PRI_MAX_MWI_MAILBOX_STR    (SIG_PRI_MAX_MWI_MAILBOXES \
   * (SIG_PRI_MAX_MWI_MBOX_NUMBER_LEN + 1 + SIG_PRI_MAX_MWI_CONTEXT_LEN + 1))

struct sig_pri_mbox {
   /*!
    * \brief MWI mailbox event subscription.
    * \note NULL if mailbox not configured.
    */
   struct ast_event_sub *sub;
   /*! \brief Mailbox number */
   const char *number;
   /*! \brief Mailbox context. */
   const char *context;
   /*! \brief Voicemail controlling number. */
   const char *vm_number;
};
#endif   /* defined(HAVE_PRI_MWI) */

enum sig_pri_colp_signaling {
   /*! Block all connected line updates. */
   SIG_PRI_COLP_BLOCK,
   /*! Only send connected line information with the CONNECT message. */
   SIG_PRI_COLP_CONNECT,
   /*! Allow all connected line updates. */
   SIG_PRI_COLP_UPDATE,
};

struct sig_pri_span {
   /* Should be set by user */
   struct ast_cc_config_params *cc_params;         /*!< CC config parameters for each new call. */
   int   pritimers[PRI_MAX_TIMERS];
   int overlapdial;                       /*!< In overlap dialing mode */
   int qsigchannelmapping;                   /*!< QSIG channel mapping type */
   int discardremoteholdretrieval;              /*!< shall remote hold or remote retrieval notifications be discarded? */
   int facilityenable;                       /*!< Enable facility IEs */
#if defined(HAVE_PRI_L2_PERSISTENCE)
   /*! Layer 2 persistence option. */
   int l2_persistence;
#endif   /* defined(HAVE_PRI_L2_PERSISTENCE) */
   int dchan_logical_span[SIG_PRI_NUM_DCHANS];     /*!< Logical offset the DCHAN sits in */
   int fds[SIG_PRI_NUM_DCHANS];              /*!< FD's for d-channels */

#if defined(HAVE_PRI_AOC_EVENTS)
   int aoc_passthrough_flag;                 /*!< Represents what AOC messages (S,D,E) are allowed to pass-through */
   unsigned int aoce_delayhangup:1;          /*!< defines whether the aoce_delayhangup option is enabled or not */
#endif   /* defined(HAVE_PRI_AOC_EVENTS) */

#if defined(HAVE_PRI_SERVICE_MESSAGES)
   unsigned int enable_service_message_support:1;  /*!< enable SERVICE message support */
#endif   /* defined(HAVE_PRI_SERVICE_MESSAGES) */
#ifdef HAVE_PRI_INBANDDISCONNECT
   unsigned int inbanddisconnect:1;          /*!< Should we support inband audio after receiving DISCONNECT? */
#endif
#if defined(HAVE_PRI_CALL_HOLD)
   /*! \brief TRUE if held calls are transferred on disconnect. */
   unsigned int hold_disconnect_transfer:1;
#endif   /* defined(HAVE_PRI_CALL_HOLD) */
   /*!
    * \brief TRUE if call transfer is enabled for the span.
    * \note Support switch-side transfer (called 2BCT, RLT or other names)
    */
   unsigned int transfer:1;
#if defined(HAVE_PRI_CALL_WAITING)
   /*! \brief TRUE if we will allow incoming ISDN call waiting calls. */
   unsigned int allow_call_waiting_calls:1;
#endif   /* defined(HAVE_PRI_CALL_WAITING) */
   /*! TRUE if layer 1 alarm status is ignored */
   unsigned int layer1_ignored:1;
   /*!
    * TRUE if a new call's sig_pri_chan.user_tag[] has the MSN
    * appended to the initial_user_tag[].
    */
   unsigned int append_msn_to_user_tag:1;
   /*! TRUE if a PROCEEDING message needs to unsquelch the received audio. */
   unsigned int inband_on_proceeding:1;
#if defined(HAVE_PRI_MCID)
   /*! \brief TRUE if allow sending MCID request on this span. */
   unsigned int mcid_send:1;
#endif   /* defined(HAVE_PRI_MCID) */
#if defined(HAVE_PRI_DATETIME_SEND)
   /*! \brief Configured date/time ie send policy option. */
   int datetime_send;
#endif   /* defined(HAVE_PRI_DATETIME_SEND) */
   int dialplan;                    /*!< Dialing plan */
   int localdialplan;                  /*!< Local dialing plan */
   int cpndialplan;                 /*!< Connected party dialing plan */
   char internationalprefix[10];       /*!< country access code ('00' for european dialplans) */
   char nationalprefix[10];            /*!< area access code ('0' for european dialplans) */
   char localprefix[20];               /*!< area access code + area code ('0'+area code for european dialplans) */
   char privateprefix[20];             /*!< for private dialplans */
   char unknownprefix[20];             /*!< for unknown dialplans */
   enum sig_pri_moh_signaling moh_signaling;
   /*! Send connected line signaling to peer option. */
   enum sig_pri_colp_signaling colp_send;
   long resetinterval;                 /*!< Interval (in seconds) for resetting unused channels */
#if defined(HAVE_PRI_DISPLAY_TEXT)
   unsigned long display_flags_send;      /*!< PRI_DISPLAY_OPTION_xxx flags for display text sending */
   unsigned long display_flags_receive;   /*!< PRI_DISPLAY_OPTION_xxx flags for display text receiving */
#endif   /* defined(HAVE_PRI_DISPLAY_TEXT) */
#if defined(HAVE_PRI_MWI)
   /*! \brief Active MWI mailboxes */
   struct sig_pri_mbox mbox[SIG_PRI_MAX_MWI_MAILBOXES];
   /*!
    * \brief Comma separated list of mailboxes to indicate MWI.
    * \note Empty if disabled.
    * \note Format: mailbox_number[@context]{,mailbox_number[@context]}
    * \note String is split apart when span is started.
    */
   char mwi_mailboxes[SIG_PRI_MAX_MWI_MAILBOX_STR];
   /*!
    * \brief Comma separated list of voicemail access controlling numbers for MWI.
    * \note Format: vm_number{,vm_number}
    * \note String is split apart when span is started.
    */
   char mwi_vm_numbers[SIG_PRI_MAX_MWI_VM_NUMBER_STR];
#endif   /* defined(HAVE_PRI_MWI) */
   /*!
    * \brief Initial user tag for party id's sent from this device driver.
    * \note String set by config file.
    */
   char initial_user_tag[AST_MAX_EXTENSION];
   char msn_list[AST_MAX_EXTENSION];      /*!< Comma separated list of MSNs to handle.  Empty if disabled. */
   char idleext[AST_MAX_EXTENSION];    /*!< Where to idle extra calls */
   char idlecontext[AST_MAX_CONTEXT];     /*!< What context to use for idle */
   char idledial[AST_MAX_EXTENSION];      /*!< What to dial before dumping */
   int minunused;                   /*!< Min # of channels to keep empty */
   int minidle;                     /*!< Min # of "idling" calls to keep active */
   int nodetype;                    /*!< Node type */
   int switchtype;                     /*!< Type of switch to emulate */
   int nsf;                      /*!< Network-Specific Facilities */
   int trunkgroup;                     /*!< What our trunkgroup is */
#if defined(HAVE_PRI_CCSS)
   int cc_ptmp_recall_mode;            /*!< CC PTMP recall mode. globalRecall(0), specificRecall(1) */
   int cc_qsig_signaling_link_req;        /*!< CC Q.SIG signaling link retention (Party A) release(0), retain(1), do-not-care(2) */
   int cc_qsig_signaling_link_rsp;        /*!< CC Q.SIG signaling link retention (Party B) release(0), retain(1) */
#endif   /* defined(HAVE_PRI_CCSS) */
#if defined(HAVE_PRI_CALL_WAITING)
   /*!
    * \brief Number of extra outgoing calls to allow on a span before
    * considering that span congested.
    */
   int max_call_waiting_calls;
   struct {
      int stripmsd;
      unsigned int hidecallerid:1;
      unsigned int hidecalleridname:1;      /*!< Hide just the name not the number for legacy PBX use */
      unsigned int immediate:1;        /*!< Answer before getting digits? */
      unsigned int priexclusive:1;        /*!< Whether or not to override and use exculsive mode for channel selection */
      unsigned int priindication_oob:1;
      unsigned int use_callerid:1;        /*!< Whether or not to use caller id on this channel */
      unsigned int use_callingpres:1;        /*!< Whether to use the callingpres the calling switch sends */
      char context[AST_MAX_CONTEXT];
      char mohinterpret[MAX_MUSICCLASS];
   } ch_cfg;

   /*!
    * \brief Number of outstanding call waiting calls.
    * \note Must be zero to allow new calls from asterisk to
    * immediately allocate a B channel.
    */
   int num_call_waiting_calls;
#endif   /* defined(HAVE_PRI_CALL_WAITING) */
   int dchanavail[SIG_PRI_NUM_DCHANS];    /*!< Whether each channel is available */
   int debug;                       /*!< set to true if to dump PRI event info */
   int span;                        /*!< span number put into user output messages */
   int resetting;                   /*!< true if span is being reset/restarted */
   int resetpos;                    /*!< current position during a reset (-1 if not started) */
   int sig;                      /*!< ISDN signalling type (SIG_PRI, SIG_BRI, SIG_BRI_PTMP, etc...) */
   int new_chan_seq;                /*!< New struct ast_channel sequence number */
   /*! TRUE if we have already whined about no D channels available. */
   unsigned int no_d_channels:1;

   /* Everything after here is internally set */
   struct pri *dchans[SIG_PRI_NUM_DCHANS];      /*!< Actual d-channels */
   struct pri *pri;                    /*!< Currently active D-channel */
   /*!
    * List of private structures of the user of this module for no B channel
    * interfaces. (hold and call waiting interfaces)
    */
   void *no_b_chan_iflist;
   /*!
    * List of private structures of the user of this module for no B channel
    * interfaces. (hold and call waiting interfaces)
    */
   void *no_b_chan_end;
   int numchans;                       /*!< Num of channels we represent */
   struct sig_pri_chan *pvts[SIG_PRI_MAX_CHANNELS];/*!< Member channel pvt structs */
   pthread_t master;                   /*!< Thread of master */
   ast_mutex_t lock;                   /*!< libpri access Mutex */
   time_t lastreset;                   /*!< time when unused channels were last reset */
   /*!
    * \brief Congestion device state of the span.
    * \details
    * AST_DEVICE_NOT_INUSE - Span does not have all B channels in use.
    * AST_DEVICE_BUSY - All B channels are in use.
    * AST_DEVICE_UNAVAILABLE - Span is in alarm.
    * \note
    * Device name: \startverbatim DAHDI/I<span>/congestion. \endverbatim
    */
   int congestion_devstate;
#if defined(THRESHOLD_DEVSTATE_PLACEHOLDER)
   /*! \todo An ISDN span threshold device state could be useful in determining how often a span utilization goes over a configurable threshold. */
   /*!
    * \brief User threshold device state of the span.
    * \details
    * AST_DEVICE_NOT_INUSE - There are no B channels in use.
    * AST_DEVICE_INUSE - The number of B channels in use is less than
    *    the configured threshold but not zero.
    * AST_DEVICE_BUSY - The number of B channels in use meets or exceeds
    *    the configured threshold.
    * AST_DEVICE_UNAVAILABLE - Span is in alarm.
    * \note
    * Device name:  DAHDI/I<span>/threshold
    */
   int threshold_devstate;
   /*!
    * \brief Number of B channels in use to consider the span in a busy state.
    * \note Setting the threshold to zero is interpreted as all B channels.
    */
   int user_busy_threshold;
#endif   /* defined(THRESHOLD_DEVSTATE_PLACEHOLDER) */
};

void sig_pri_extract_called_num_subaddr(struct sig_pri_chan *p, const char *rdest, char *called, size_t called_buff_size);
int sig_pri_call(struct sig_pri_chan *p, struct ast_channel *ast, const char *rdest, int timeout, int layer1);

int sig_pri_hangup(struct sig_pri_chan *p, struct ast_channel *ast);

int sig_pri_indicate(struct sig_pri_chan *p, struct ast_channel *chan, int condition, const void *data, size_t datalen);

int sig_pri_answer(struct sig_pri_chan *p, struct ast_channel *ast);

int sig_pri_is_chan_available(struct sig_pri_chan *pvt);
int sig_pri_available(struct sig_pri_chan **pvt, int is_specific_channel);

void sig_pri_init_pri(struct sig_pri_span *pri);

/* If return 0, it means this function was able to handle it (pre setup digits).  If non zero, the user of this
 * functions should handle it normally (generate inband DTMF) */
int sig_pri_digit_begin(struct sig_pri_chan *pvt, struct ast_channel *ast, char digit);
void sig_pri_dial_complete(struct sig_pri_chan *pvt, struct ast_channel *ast);

void sig_pri_stop_pri(struct sig_pri_span *pri);
int sig_pri_start_pri(struct sig_pri_span *pri);

void sig_pri_set_alarm(struct sig_pri_chan *p, int in_alarm);
void sig_pri_chan_alarm_notify(struct sig_pri_chan *p, int noalarm);

int sig_pri_is_alarm_ignored(struct sig_pri_span *pri);
void pri_event_alarm(struct sig_pri_span *pri, int index, int before_start_pri);
void pri_event_noalarm(struct sig_pri_span *pri, int index, int before_start_pri);

struct ast_channel *sig_pri_request(struct sig_pri_chan *p, enum sig_pri_law law, const struct ast_channel *requestor, int transfercapability);

struct sig_pri_chan *sig_pri_chan_new(void *pvt_data, struct sig_pri_span *pri, int logicalspan, int channo, int trunkgroup);
void sig_pri_chan_delete(struct sig_pri_chan *doomed);

int pri_is_up(struct sig_pri_span *pri);

struct mansession;
int sig_pri_ami_show_spans(struct mansession *s, const char *show_cmd, struct sig_pri_span *pri, const int *dchannels, const char *action_id);

void sig_pri_cli_show_channels_header(int fd);
void sig_pri_cli_show_channels(int fd, struct sig_pri_span *pri);
void sig_pri_cli_show_spans(int fd, int span, struct sig_pri_span *pri);

void sig_pri_cli_show_span(int fd, int *dchannels, struct sig_pri_span *pri);

int pri_send_keypad_facility_exec(struct sig_pri_chan *p, const char *digits);
int pri_send_callrerouting_facility_exec(struct sig_pri_chan *p, enum ast_channel_state chanstate, const char *destination, const char *original, const char *reason);

#if defined(HAVE_PRI_SERVICE_MESSAGES)
int pri_maintenance_bservice(struct pri *pri, struct sig_pri_chan *p, int changestatus);
#endif   /* defined(HAVE_PRI_SERVICE_MESSAGES) */

void sig_pri_fixup(struct ast_channel *oldchan, struct ast_channel *newchan, struct sig_pri_chan *pchan);
#if defined(HAVE_PRI_DISPLAY_TEXT)
void sig_pri_sendtext(struct sig_pri_chan *pchan, const char *text);
#endif   /* defined(HAVE_PRI_DISPLAY_TEXT) */

int sig_pri_cc_agent_init(struct ast_cc_agent *agent, struct sig_pri_chan *pvt_chan);
int sig_pri_cc_agent_start_offer_timer(struct ast_cc_agent *agent);
int sig_pri_cc_agent_stop_offer_timer(struct ast_cc_agent *agent);
void sig_pri_cc_agent_req_rsp(struct ast_cc_agent *agent, enum ast_cc_agent_response_reason reason);
int sig_pri_cc_agent_status_req(struct ast_cc_agent *agent);
int sig_pri_cc_agent_stop_ringing(struct ast_cc_agent *agent);
int sig_pri_cc_agent_party_b_free(struct ast_cc_agent *agent);
int sig_pri_cc_agent_start_monitoring(struct ast_cc_agent *agent);
int sig_pri_cc_agent_callee_available(struct ast_cc_agent *agent);
void sig_pri_cc_agent_destructor(struct ast_cc_agent *agent);

int sig_pri_cc_monitor_req_cc(struct ast_cc_monitor *monitor, int *available_timer_id);
int sig_pri_cc_monitor_suspend(struct ast_cc_monitor *monitor);
int sig_pri_cc_monitor_unsuspend(struct ast_cc_monitor *monitor);
int sig_pri_cc_monitor_status_rsp(struct ast_cc_monitor *monitor, enum ast_device_state devstate);
int sig_pri_cc_monitor_cancel_available_timer(struct ast_cc_monitor *monitor, int *sched_id);
void sig_pri_cc_monitor_destructor(void *monitor_pvt);

int sig_pri_load(const char *cc_type_name);
void sig_pri_unload(void);

#endif /* _SIG_PRI_H */