Teko_StridedMappingStrategy.cpp

/*
// @HEADER
// 
// ***********************************************************************
// 
//      Teko: A package for block and physics based preconditioning
//                  Copyright 2010 Sandia Corporation 
//  
// Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
// the U.S. Government retains certain rights in this software.
//  
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//  
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//  
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//  
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission. 
//  
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//  
// Questions? Contact Eric C. Cyr (eccyr@sandia.gov)
// 
// ***********************************************************************
// 
// @HEADER

*/

#include "Epetra/Teko_StridedMappingStrategy.hpp"
#include "Epetra/Teko_InterlacedEpetra.hpp"
#include "Epetra/Teko_EpetraHelpers.hpp"

#include "Thyra_EpetraThyraWrappers.hpp"
#include "Thyra_EpetraLinearOp.hpp"
#include "Thyra_DefaultProductMultiVector.hpp"
#include "Thyra_DefaultProductVectorSpace.hpp"
#include "Thyra_DefaultSpmdMultiVector.hpp"
#include "Thyra_DefaultBlockedLinearOp.hpp"
#include "Thyra_get_Epetra_Operator.hpp"

using Teuchos::RCP;
using Teuchos::rcp;
using Teuchos::rcp_dynamic_cast;

namespace Teko {
namespace Epetra {

// Creates a strided mapping strategy. This class is useful
// for breaking up nodally ordered matrices (i.e. the unknowns
// in a FEM problem are ordered [u0,v0,p0,u1,v1,p1,...]). Current
// implimentation only supports a fixed number of variables
//
//    arguments: 
//       vars - Number of different variables 
//       map  - original Epetra_Map to be broken up
//       comm - Epetra_Comm object related to the map
//
StridedMappingStrategy::StridedMappingStrategy(const std::vector<int> & vars,const RCP<const Epetra_Map> & map,
                                               const Epetra_Comm & comm)
{
   rangeMap_ = map;
   domainMap_ = map;
   buildBlockTransferData(vars, rangeMap_,comm);
}

// Virtual function defined in MappingStrategy.  This copies
// an Epetra_MultiVector into a Thyra::MultiVectorBase with
// blocking handled by the strides defined in the constructor.
//
//   arguments:
//      X       - source Epetra_MultiVector
//      thyra_X - destination Thyra::MultiVectorBase
//
void StridedMappingStrategy::copyEpetraIntoThyra(const Epetra_MultiVector& X,
                                                 const Teuchos::Ptr<Thyra::MultiVectorBase<double> > & thyra_X) const 
{
   int count = X.NumVectors(); 

   std::vector<RCP<Epetra_MultiVector> > subX;

   // allocate vectors to copy into
   Strided::buildSubVectors(blockMaps_,subX,count);

   // copy source vector to X vector
   Strided::one2many(subX,X,blockImport_);

   // convert subX to an array of multi vectors
   Teuchos::Array<RCP<Thyra::MultiVectorBase<double> > > thyra_subX;
   Teuchos::Ptr<Thyra::ProductMultiVectorBase<double> > prod_X
         = Teuchos::ptr_dynamic_cast<Thyra::ProductMultiVectorBase<double> >(thyra_X);
   for(unsigned int i=0;i<blockMaps_.size();i++) {
      RCP<Thyra::DefaultSpmdMultiVector<double> > vec 
            = rcp_dynamic_cast<Thyra::DefaultSpmdMultiVector<double> >(prod_X->getNonconstMultiVectorBlock(i)); 
      fillDefaultSpmdMultiVector(vec,subX[i]);
   }
}

// Virtual function defined in MappingStrategy.  This copies
// an Epetra_MultiVector into a Thyra::MultiVectorBase with
// blocking handled by the strides defined in the constructor.
//
//   arguments:
//      thyra_Y - source Thyra::MultiVectorBase
//      Y       - destination Epetra_MultiVector
//
void StridedMappingStrategy::copyThyraIntoEpetra(const RCP<const Thyra::MultiVectorBase<double> > & thyra_Y,
                                                 Epetra_MultiVector& Y) const
{
   std::vector<RCP<const Epetra_MultiVector> > subY;
   RCP<const Thyra::DefaultProductMultiVector<double> > prod_Y 
         = rcp_dynamic_cast<const Thyra::DefaultProductMultiVector<double> >(thyra_Y);

   // convert thyra product vector to subY
   for(unsigned int i=0;i<blockMaps_.size();i++)
      subY.push_back(Thyra::get_Epetra_MultiVector(*blockMaps_[i].second,prod_Y->getMultiVectorBlock(i)));

   // endow the subVectors with required information about the maps
   Strided::associateSubVectors(blockMaps_,subY);

   // copy solution vectors to Y vector
   Strided::many2one(Y,subY,blockExport_);
}

// this is the core routine that builds the maps
// and importers/exporters neccessary for all the
// transfers. Currently it simply calls out to the
// interlaced epetra functions. (Comment: this
// routine should probably be private or protected
// ... it is basically the meat of the constructor)
//
//    arguments:
//       vars - Vector describing the blocking of variables
//       baseMap - basic map to use in the transfers
//       comm    - Epetra_Comm object
//
void StridedMappingStrategy::buildBlockTransferData(const std::vector<int> & vars,const Teuchos::RCP<const Epetra_Map> & baseMap, const Epetra_Comm & comm)
{
   // build maps and exporters/importers
   Strided::buildSubMaps(*baseMap,vars,comm,blockMaps_);
   Strided::buildExportImport(*baseMap, blockMaps_, blockExport_,blockImport_);
}

// Builds a blocked Thyra operator that uses the strided
// mapping strategy to define sub blocks.
//
//    arguments:
//       mat - Epetra_CrsMatrix with FillComplete called, this
//             matrix is assumed to be square, with the same
//             range and domain maps
//    returns: Blocked Thyra linear operator with sub blocks
//             defined by this mapping strategy
//
const Teuchos::RCP<Thyra::BlockedLinearOpBase<double> > 
StridedMappingStrategy::buildBlockedThyraOp(const RCP<const Epetra_CrsMatrix> & crsContent,const std::string & label) const
{
   int dim = blockMaps_.size();

   RCP<Thyra::DefaultBlockedLinearOp<double> > A = Thyra::defaultBlockedLinearOp<double>();

   A->beginBlockFill(dim,dim);
   for(int i=0;i<dim;i++) {
      for(int j=0;j<dim;j++) {
         // label block correctly
         std::stringstream ss;
         ss << label << "_" << i << "," << j;

         // build the blocks and place it the right location
         A->setNonconstBlock(i,j,Thyra::nonconstEpetraLinearOp(Strided::buildSubBlock(i,j,*crsContent,blockMaps_),ss.str()));
      }
   } // end for i
   A->endBlockFill();

   return A;
}

// Rebuilds a blocked Thyra operator that uses the strided
// mapping strategy to define sub blocks.
//
//    arguments:
//       crsContent - Epetra_CrsMatrix with FillComplete called, this
//                    matrix is assumed to be square, with the same
//                    range and domain maps
//       A - Destination block linear op composed of blocks of
//           Epetra_CrsMatrix at all relevant locations
//
void StridedMappingStrategy::rebuildBlockedThyraOp(const RCP<const Epetra_CrsMatrix> & crsContent,
                                                   const RCP<Thyra::BlockedLinearOpBase<double> > & A) const
{
   int dim = blockMaps_.size();

   for(int i=0;i<dim;i++) {
      for(int j=0;j<dim;j++) {
         // get Epetra version of desired block
         RCP<Thyra::LinearOpBase<double> > Aij = A->getNonconstBlock(i,j);
         RCP<Epetra_CrsMatrix> eAij = rcp_dynamic_cast<Epetra_CrsMatrix>(Thyra::get_Epetra_Operator(*Aij),true);

         // rebuild the blocks and place it the right location
         Strided::rebuildSubBlock(i,j,*crsContent,blockMaps_,*eAij);
      }
   } // end for i
}

} // end namespace Epetra
} // end namespace Teko