BLI_noise.h File Reference

Go to the source code of this file.

Functions
float	BLI_noise_hnoise (float noisesize, float x, float y, float z)
float	BLI_noise_hnoisep (float noisesize, float x, float y, float z)
float	BLI_noise_turbulence (float noisesize, float x, float y, float z, int nr)
float	BLI_noise_generic_noise (float noisesize, float x, float y, float z, bool hard, int noisebasis)
float	BLI_noise_generic_turbulence (float noisesize, float x, float y, float z, int oct, bool hard, int noisebasis)
float	BLI_noise_mg_fbm (float x, float y, float z, float H, float lacunarity, float octaves, int noisebasis)
float	BLI_noise_mg_multi_fractal (float x, float y, float z, float H, float lacunarity, float octaves, int noisebasis)
float	BLI_noise_mg_variable_lacunarity (float x, float y, float z, float distortion, int nbas1, int nbas2)
float	BLI_noise_mg_hetero_terrain (float x, float y, float z, float H, float lacunarity, float octaves, float offset, int noisebasis)
float	BLI_noise_mg_hybrid_multi_fractal (float x, float y, float z, float H, float lacunarity, float octaves, float offset, float gain, int noisebasis)
float	BLI_noise_mg_ridged_multi_fractal (float x, float y, float z, float H, float lacunarity, float octaves, float offset, float gain, int noisebasis)
void	BLI_noise_voronoi (float x, float y, float z, float *da, float *pa, float me, int dtype)
float	BLI_noise_cell (float x, float y, float z)
void	BLI_noise_cell_v3 (float x, float y, float z, float r_ca[3])

Function Documentation

BLI_noise_cell()

float BLI_noise_cell	(	float	x,
		float	y,
		float	z )

newnoise: BLI_noise_cell & BLI_noise_cell_v3 (for vector/point/color). idem, signed.

Definition at line 1126 of file noise.c.

References BLI_cellNoiseU(), and z().

Referenced by BLI_noise_mg_fbm(), BLI_noise_mg_hetero_terrain(), BLI_noise_mg_hybrid_multi_fractal(), BLI_noise_mg_multi_fractal(), BLI_noise_mg_ridged_multi_fractal(), BLI_noise_mg_variable_lacunarity(), and M_Noise_cell().

BLI_noise_cell_v3()

void BLI_noise_cell_v3	(	float	x,
		float	y,
		float	z,
		float	r_ca[3] )

Returns a vector/point/color in r_ca, using point hash-array directly.

Definition at line 1131 of file noise.c.

References floor(), HASHPNT, int, and z().

Referenced by M_Noise_cell_vector(), and voronoiTex().

BLI_noise_generic_noise()

float BLI_noise_generic_noise	(	float	noisesize,
		float	x,
		float	y,
		float	z,
		bool	hard,
		int	noisebasis )

newnoise: generic noise & turbulence functions to replace the above BLI_noise_hnoise/p & BLI_noise_turbulence/1. This is done so different noise basis functions can be used. newnoise: generic noise function for use with different noisebasis.

Definition at line 1153 of file noise.c.

References BLI_cellNoiseU(), fabsf, float, newPerlinU(), orgBlenderNoise(), orgPerlinNoiseU(), voronoi_Cr(), voronoi_F1(), voronoi_F1F2(), voronoi_F2(), voronoi_F3(), voronoi_F4(), and z().

Referenced by M_Noise_noise(), noise_vector(), stucci(), turb(), and wood_int().

BLI_noise_generic_turbulence()

float BLI_noise_generic_turbulence	(	float	noisesize,
		float	x,
		float	y,
		float	z,
		int	oct,
		bool	hard,
		int	noisebasis )

newnoise: generic turbulence function for use with different noisebasis.

Definition at line 1210 of file noise.c.

References BLI_cellNoiseU(), fabsf, float, newPerlinU(), orgBlenderNoise(), orgPerlinNoiseU(), sum(), voronoi_Cr(), voronoi_F1(), voronoi_F1F2(), voronoi_F2(), voronoi_F3(), voronoi_F4(), and z().

Referenced by alter_co(), clouds(), do_physical_effector(), do_rough(), do_rough_curve(), marble_int(), and pointdensity().

BLI_noise_hnoise()

float BLI_noise_hnoise	(	float	noisesize,
		float	x,
		float	y,
		float	z )

Definition at line 424 of file noise.c.

References orgBlenderNoise(), x, y, and z().

Referenced by BLI_noise_turbulence().

BLI_noise_hnoisep()

float BLI_noise_hnoisep	(	float	noisesize,
		float	x,
		float	y,
		float	z )

Definition at line 841 of file noise.c.

References noise3_perlin(), and z().

BLI_noise_mg_fbm()

float BLI_noise_mg_fbm	(	float	x,
		float	y,
		float	z,
		float	H,
		float	lacunarity,
		float	octaves,
		int	noisebasis )

Procedural fBm evaluated at "point"; returns value stored in "value".

Parameters

H	is the fractal increment parameter.
lacunarity	is the gap between successive frequencies.
octaves	is the number of frequencies in the fBm.

Definition at line 1272 of file noise.c.

References BLI_noise_cell(), float, floorf, H, int, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), powf, voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_fractal(), and mg_mFractalOrfBmTex().

BLI_noise_mg_hetero_terrain()

float BLI_noise_mg_hetero_terrain	(	float	x,
		float	y,
		float	z,
		float	H,
		float	lacunarity,
		float	octaves,
		float	offset,
		int	noisebasis )

Heterogeneous procedural terrain function: stats by altitude method. Evaluated at "point"; returns value stored in "value".

Parameters

H	Determines the fractal dimension of the roughest areas.
lacunarity	Is the gap between successive frequencies.
octaves	Is the number of frequencies in the fBm.
offset	Raises the terrain from sea level.

Definition at line 1391 of file noise.c.

References BLI_noise_cell(), float, floorf, H, int, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), powf, voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_hetero_terrain(), and mg_HTerrainTex().

BLI_noise_mg_hybrid_multi_fractal()

float BLI_noise_mg_hybrid_multi_fractal	(	float	x,
		float	y,
		float	z,
		float	H,
		float	lacunarity,
		float	octaves,
		float	offset,
		float	gain,
		int	noisebasis )

Hybrid additive/multiplicative multi-fractal terrain model.

Some good parameter values to start with:

Parameters

H	0.25
offset	0.7

Definition at line 1461 of file noise.c.

References BLI_noise_cell(), float, floorf, H, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), powf, result, voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_hybrid_multi_fractal(), and mg_ridgedOrHybridMFTex().

BLI_noise_mg_multi_fractal()

float BLI_noise_mg_multi_fractal	(	float	x,
		float	y,
		float	z,
		float	H,
		float	lacunarity,
		float	octaves,
		int	noisebasis )

Procedural multi-fractal evaluated at "point"; returns value stored in "value".

Parameters

H	determines the highest fractal dimension.
lacunarity	is gap between successive frequencies.
octaves	is the number of frequencies in the fBm.

Note

There used to be a parameter called offset, old docs read: is the zero offset, which determines multi-fractality.

Definition at line 1332 of file noise.c.

References BLI_noise_cell(), float, floorf, H, int, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), powf, voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_multi_fractal(), and mg_mFractalOrfBmTex().

BLI_noise_mg_ridged_multi_fractal()

float BLI_noise_mg_ridged_multi_fractal	(	float	x,
		float	y,
		float	z,
		float	H,
		float	lacunarity,
		float	octaves,
		float	offset,
		float	gain,
		int	noisebasis )

Ridged multi-fractal terrain model.

Some good parameter values to start with:

Parameters

H	1.0
offset	1.0
gain	2.0

Definition at line 1537 of file noise.c.

References BLI_noise_cell(), fabsf, float, H, int, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), powf, result, voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_ridged_multi_fractal(), and mg_ridgedOrHybridMFTex().

BLI_noise_mg_variable_lacunarity()

float BLI_noise_mg_variable_lacunarity	(	float	x,
		float	y,
		float	z,
		float	distortion,
		int	nbas1,
		int	nbas2 )

"Variable Lacunarity Noise" A distorted variety of Perlin noise.

Definition at line 1608 of file noise.c.

References BLI_noise_cell(), float, newPerlin(), orgBlenderNoiseS(), orgPerlinNoise(), voronoi_CrS(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2S(), voronoi_F3S(), voronoi_F4S(), and z().

Referenced by M_Noise_variable_lacunarity(), and mg_distNoiseTex().

BLI_noise_turbulence()

float BLI_noise_turbulence	(	float	noisesize,
		float	x,
		float	y,
		float	z,
		int	nr )

Original turbulence functions.

Definition at line 437 of file noise.c.

References BLI_noise_hnoise(), and z().

Referenced by fcm_noise_evaluate().

BLI_noise_voronoi()

void BLI_noise_voronoi	(	float	x,
		float	y,
		float	z,
		float *	da,
		float *	pa,
		float	me,
		int	dtype )

Not 'pure' Worley, but the results are virtually the same. Returns distances in da and point coords in pa.

Definition at line 915 of file noise.c.

References dist_Chebychev(), dist_Manhattan(), dist_Minkovsky(), dist_Minkovsky4(), dist_MinkovskyH(), dist_Real(), dist_Squared(), float, floor(), HASHPNT, int, and z().

Referenced by do_clump(), M_Noise_voronoi(), voronoi_F1(), voronoi_F1F2(), voronoi_F1F2S(), voronoi_F1S(), voronoi_F2(), voronoi_F2S(), voronoi_F3(), voronoi_F3S(), voronoi_F4(), voronoi_F4S(), and voronoiTex().