bmesh_operators.hh File Reference

#include "intern/bmesh_operator_api_inline.hh"

Go to the source code of this file.

Enumerations
enum	{ SUBD_CORNER_INNERVERT , SUBD_CORNER_PATH , SUBD_CORNER_FAN , SUBD_CORNER_STRAIGHT_CUT }
enum	{   SUBD_FALLOFF_SMOOTH = 0 , SUBD_FALLOFF_SPHERE , SUBD_FALLOFF_ROOT , SUBD_FALLOFF_SHARP ,   SUBD_FALLOFF_LIN , SUBD_FALLOFF_INVSQUARE = 7 }
enum	{ SUBDIV_SELECT_NONE , SUBDIV_SELECT_ORIG , SUBDIV_SELECT_INNER , SUBDIV_SELECT_LOOPCUT }
enum	{ SUBD_RING_INTERP_LINEAR , SUBD_RING_INTERP_PATH , SUBD_RING_INTERP_SURF }
enum	{   SIMFACE_MATERIAL = 201 , SIMFACE_AREA , SIMFACE_SIDES , SIMFACE_PERIMETER ,   SIMFACE_NORMAL , SIMFACE_COPLANAR , SIMFACE_SMOOTH , SIMFACE_FREESTYLE }
enum	{   SIMEDGE_LENGTH = 101 , SIMEDGE_DIR , SIMEDGE_FACE , SIMEDGE_FACE_ANGLE ,   SIMEDGE_CREASE , SIMEDGE_BEVEL , SIMEDGE_SEAM , SIMEDGE_SHARP ,   SIMEDGE_FREESTYLE }
enum	{   SIMVERT_NORMAL = 0 , SIMVERT_FACE , SIMVERT_VGROUP , SIMVERT_EDGE ,   SIMVERT_CREASE }
enum	{ BMOP_POKE_MEDIAN_WEIGHTED = 0 , BMOP_POKE_MEDIAN , BMOP_POKE_BOUNDS }
enum	{   BEVEL_AMT_OFFSET , BEVEL_AMT_WIDTH , BEVEL_AMT_DEPTH , BEVEL_AMT_PERCENT ,   BEVEL_AMT_ABSOLUTE }
enum	{ BEVEL_PROFILE_SUPERELLIPSE , BEVEL_PROFILE_CUSTOM }
enum	{ BEVEL_FACE_STRENGTH_NONE , BEVEL_FACE_STRENGTH_NEW , BEVEL_FACE_STRENGTH_AFFECTED , BEVEL_FACE_STRENGTH_ALL }
enum	{ BEVEL_MITER_SHARP , BEVEL_MITER_PATCH , BEVEL_MITER_ARC }
enum	{ BEVEL_VMESH_ADJ , BEVEL_VMESH_CUTOFF }
enum	{ BEVEL_AFFECT_VERTICES = 0 , BEVEL_AFFECT_EDGES = 1 }
enum	{ FACE_STRENGTH_WEAK = -16384 , FACE_STRENGTH_MEDIUM = 0 , FACE_STRENGTH_STRONG = 16384 }

Functions
void	BM_mesh_esubdivide (BMesh *bm, char edge_hflag, float smooth, short smooth_falloff, bool use_smooth_even, float fractal, float along_normal, int numcuts, int seltype, int cornertype, short use_single_edge, short use_grid_fill, short use_only_quads, int seed)
void	BM_mesh_calc_uvs_grid (BMesh *bm, uint x_segments, uint y_segments, short oflag, int cd_loop_uv_offset)
void	BM_mesh_calc_uvs_sphere (BMesh *bm, short oflag, int cd_loop_uv_offset)
void	BM_mesh_calc_uvs_circle (BMesh *bm, float mat[4][4], float radius, short oflag, int cd_loop_uv_offset)
void	BM_mesh_calc_uvs_cone (BMesh *bm, float mat[4][4], float radius_top, float radius_bottom, int segments, bool cap_ends, short oflag, int cd_loop_uv_offset)
void	BM_mesh_calc_uvs_cube (BMesh *bm, short oflag)

Variables
const BMOpDefine *	bmo_opdefines []
const int	bmo_opdefines_total

Enumeration Type Documentation

anonymous enum

anonymous enum

Enumerator
SUBD_CORNER_INNERVERT
SUBD_CORNER_PATH
SUBD_CORNER_FAN
SUBD_CORNER_STRAIGHT_CUT

Definition at line 16 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SUBD_FALLOFF_SMOOTH
SUBD_FALLOFF_SPHERE
SUBD_FALLOFF_ROOT
SUBD_FALLOFF_SHARP
SUBD_FALLOFF_LIN
SUBD_FALLOFF_INVSQUARE

Definition at line 24 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SUBDIV_SELECT_NONE
SUBDIV_SELECT_ORIG
SUBDIV_SELECT_INNER
SUBDIV_SELECT_LOOPCUT

Definition at line 33 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SUBD_RING_INTERP_LINEAR
SUBD_RING_INTERP_PATH
SUBD_RING_INTERP_SURF

Definition at line 41 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SIMFACE_MATERIAL
SIMFACE_AREA
SIMFACE_SIDES
SIMFACE_PERIMETER
SIMFACE_NORMAL
SIMFACE_COPLANAR
SIMFACE_SMOOTH
SIMFACE_FREESTYLE

Definition at line 53 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SIMEDGE_LENGTH
SIMEDGE_DIR
SIMEDGE_FACE
SIMEDGE_FACE_ANGLE
SIMEDGE_CREASE
SIMEDGE_BEVEL
SIMEDGE_SEAM
SIMEDGE_SHARP
SIMEDGE_FREESTYLE

Definition at line 65 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
SIMVERT_NORMAL
SIMVERT_FACE
SIMVERT_VGROUP
SIMVERT_EDGE
SIMVERT_CREASE

Definition at line 78 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BMOP_POKE_MEDIAN_WEIGHTED
BMOP_POKE_MEDIAN
BMOP_POKE_BOUNDS

Definition at line 87 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_AMT_OFFSET
BEVEL_AMT_WIDTH
BEVEL_AMT_DEPTH
BEVEL_AMT_PERCENT
BEVEL_AMT_ABSOLUTE

Definition at line 94 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_PROFILE_SUPERELLIPSE
BEVEL_PROFILE_CUSTOM

Definition at line 103 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_FACE_STRENGTH_NONE
BEVEL_FACE_STRENGTH_NEW
BEVEL_FACE_STRENGTH_AFFECTED
BEVEL_FACE_STRENGTH_ALL

Definition at line 109 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_MITER_SHARP
BEVEL_MITER_PATCH
BEVEL_MITER_ARC

Definition at line 117 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_VMESH_ADJ
BEVEL_VMESH_CUTOFF

Definition at line 124 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
BEVEL_AFFECT_VERTICES
BEVEL_AFFECT_EDGES

Definition at line 130 of file bmesh_operators.hh.

anonymous enum

anonymous enum

Enumerator
FACE_STRENGTH_WEAK
FACE_STRENGTH_MEDIUM
FACE_STRENGTH_STRONG

Definition at line 136 of file bmesh_operators.hh.

Function Documentation

BM_mesh_calc_uvs_circle()

void BM_mesh_calc_uvs_circle	(	BMesh *	bm,
		float	mat[4][4],
		float	radius,
		short	oflag,
		int	cd_loop_uv_offset )

Fills first available UV-map with 2D projected UVs for all faces with oflag set.

Parameters

bm	The BMesh to operate on.
mat	The transform matrix applied to the created circle.
radius	The size of the circle.
oflag	The flag to check faces with.

Definition at line 1319 of file bmo_primitive.cc.

References BLI_assert, bm, BM_ELEM_CD_GET_FLOAT_P, BM_FACES_OF_MESH, BM_ITER_ELEM, BM_ITER_MESH, BM_LOOPS_OF_FACE, BMO_face_flag_test, BMVert::co, copy_v3_v3(), invert_m4_m4(), l, mul_m4_v3(), oflag, and BMLoop::v.

Referenced by bmo_create_circle_exec().

BM_mesh_calc_uvs_cone()

void BM_mesh_calc_uvs_cone	(	BMesh *	bm,
		float	mat[4][4],
		float	radius_top,
		float	radius_bottom,
		int	segments,
		bool	cap_ends,
		short	oflag,
		int	cd_loop_uv_offset )

Fills first available UV-map with cylinder/cone-like UVs for all faces with oflag set.

Parameters

bm	The BMesh to operate on.
mat	The transform matrix applied to the created cone/cylinder.
radius_top	The size of the top end of the cone/cylinder.
radius_bottom	The size of the bottom end of the cone/cylinder.
segments	The number of subdivisions in the sides of the cone/cylinder.
cap_ends	Whether the ends of the cone/cylinder are filled or not.
oflag	The flag to check faces with.

Definition at line 1505 of file bmo_primitive.cc.

References BLI_assert, bm, BM_ELEM_CD_GET_FLOAT_P, BM_face_normal_update(), BM_FACES_OF_MESH, BM_ITER_ELEM, BM_ITER_ELEM_INDEX, BM_ITER_MESH, BM_LOOPS_OF_FACE, BMO_face_flag_test, BMVert::co, dot_v3v3(), float, invert_m4_m4(), l, BMFace::len, mul_mat3_m4_v3(), mul_v3_m4v3(), BMFace::no, normalize_v3(), oflag, BMLoop::v, x, and y.

Referenced by bmo_create_cone_exec().

BM_mesh_calc_uvs_cube()

void BM_mesh_calc_uvs_cube	(	BMesh *	bm,
		short	oflag )

Fills first available UV-map with cube-like UVs for all faces with oflag set.

Note

Expects tagged faces to be six quads.

Caller must order faces for correct alignment.

Parameters

bm	The BMesh to operate on.
oflag	The flag to check faces with.

Definition at line 1670 of file bmo_primitive.cc.

References BLI_assert, bm, BM_ELEM_CD_GET_FLOAT_P, BM_FACES_OF_MESH, BM_ITER_ELEM_INDEX, BM_ITER_MESH, BM_LOOPS_OF_FACE, BMO_face_flag_test, CD_PROP_FLOAT2, CustomData_get_offset(), l, BMesh::ldata, oflag, x, and y.

Referenced by bmo_create_cube_exec().

BM_mesh_calc_uvs_grid()

void BM_mesh_calc_uvs_grid	(	BMesh *	bm,
		uint	x_segments,
		uint	y_segments,
		short	oflag,
		int	cd_loop_uv_offset )

Fills first available UV-map with grid-like UVs for all faces with oflag set.

Parameters

bm	The BMesh to operate on
x_segments	The x-resolution of the grid
y_segments	The y-resolution of the grid
oflag	The flag to check faces with.

Definition at line 779 of file bmo_primitive.cc.

References BLI_assert, bm, BM_ELEM_CD_GET_FLOAT_P, BM_FACES_OF_MESH, BM_ITER_ELEM_INDEX, BM_ITER_MESH, BM_LOOPS_OF_FACE, BMO_face_flag_test, float, l, oflag, x, and y.

Referenced by bmo_create_grid_exec().

BM_mesh_calc_uvs_sphere()

void BM_mesh_calc_uvs_sphere	(	BMesh *	bm,
		short	oflag,
		int	cd_loop_uv_offset )

Fills first available UV-map with spherical projected UVs for all faces with oflag set.

Parameters

bm	The BMesh to operate on
oflag	The flag to check faces with.

Definition at line 1114 of file bmo_primitive.cc.

References BLI_assert, bm, BM_ELEM_CD_GET_FLOAT_P, BM_FACES_OF_MESH, BM_ITER_ELEM_INDEX, BM_ITER_MESH, BM_LOOPS_OF_FACE, bm_mesh_calc_uvs_sphere_face(), BMO_face_flag_test, l, and oflag.

Referenced by bmo_create_uvsphere_exec().

BM_mesh_esubdivide()

void BM_mesh_esubdivide	(	BMesh *	bm,
		char	edge_hflag,
		float	smooth,
		short	smooth_falloff,
		bool	use_smooth_even,
		float	fractal,
		float	along_normal,
		int	numcuts,
		int	seltype,
		int	cornertype,
		short	use_single_edge,
		short	use_grid_fill,
		short	use_only_quads,
		int	seed )

Definition at line 1314 of file bmo_subdivide.cc.

References bm, BM_ALL_NOLOOP, BM_EDGE, BM_ELEM_SELECT, BM_FACE, BM_mesh_elem_hflag_disable_all(), BM_mesh_select_flush(), BM_VERT, BMO_FLAG_DEFAULTS, BMO_op_exec(), BMO_op_finish(), BMO_op_initf(), BMO_slot_buffer_hflag_enable(), seed, BMOperator::slots_out, SUBDIV_SELECT_INNER, SUBDIV_SELECT_LOOPCUT, SUBDIV_SELECT_NONE, and SUBDIV_SELECT_ORIG.

Referenced by edbm_subdivide_exec(), and ringsel_finish().

Variable Documentation

bmo_opdefines

const BMOpDefine* bmo_opdefines[]

extern

Definition at line 2124 of file bmesh_opdefines.cc.

Referenced by BMO_op_finish(), BMO_op_init(), BMO_opcode_from_opname(), bpy_bmesh_op_doc_get(), and bpy_bmesh_ops_module_dir().

bmo_opdefines_total

const int bmo_opdefines_total

extern

Definition at line 2209 of file bmesh_opdefines.cc.

Referenced by BMO_opcode_from_opname(), and bpy_bmesh_ops_module_dir().