#include <cstddef>
#include "MEM_guardedalloc.h"
#include "DNA_scene_types.h"
#include "BLI_listbase.h"
#include "BLI_math_vector.h"
#include "BLI_task.h"
#include "bmesh.hh"
#include "bmesh_structure.hh"
#include "bmesh_private.hh"

Classes
struct	SelectionCountChunkData

struct	SelectionFlushChunkData

Functions
void	BM_mesh_select_mode_clean_ex (BMesh *bm, const short selectmode)
	Select Mode Clean.

void	BM_mesh_select_mode_clean (BMesh *bm)

void	BM_mesh_deselect_flush (BMesh *bm)

void	BM_mesh_select_flush (BMesh *bm)

void	BM_vert_select_set (BMesh bm, BMVert v, const bool select)
	Select Vert.

void	BM_edge_select_set (BMesh bm, BMEdge e, const bool select)
	Select Edge.

void	BM_face_select_set (BMesh bm, BMFace f, const bool select)
	Select Face.

void	BM_mesh_select_mode_set (BMesh *bm, int selectmode)

static int	bm_mesh_flag_count (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool test_for_enabled)

int	BM_mesh_elem_hflag_count_enabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)

int	BM_mesh_elem_hflag_count_disabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)

void	BM_elem_select_set (BMesh bm, BMElem ele, const bool select)

void	BM_mesh_active_face_set (BMesh bm, BMFace f)

int	BM_mesh_active_face_index_get (BMesh *bm, bool is_sloppy, bool is_selected)

int	BM_mesh_active_edge_index_get (BMesh *bm)

int	BM_mesh_active_vert_index_get (BMesh *bm)

int	BM_mesh_active_elem_index_get (BMesh *bm)

BMFace *	BM_mesh_active_face_get (BMesh *bm, const bool is_sloppy, const bool is_selected)

BMEdge *	BM_mesh_active_edge_get (BMesh *bm)

BMVert *	BM_mesh_active_vert_get (BMesh *bm)

BMElem *	BM_mesh_active_elem_get (BMesh *bm)

void	BM_editselection_center (BMEditSelection *ese, float r_center[3])

void	BM_editselection_normal (BMEditSelection *ese, float r_normal[3])

void	BM_editselection_plane (BMEditSelection *ese, float r_plane[3])

static BMEditSelection *	bm_select_history_create (BMHeader *ele)

bool	_bm_select_history_check (BMesh bm, const BMHeader ele)

bool	_bm_select_history_remove (BMesh bm, BMHeader ele)

void	_bm_select_history_store_notest (BMesh bm, BMHeader ele)

void	_bm_select_history_store_head_notest (BMesh bm, BMHeader ele)

void	_bm_select_history_store (BMesh bm, BMHeader ele)

void	_bm_select_history_store_head (BMesh bm, BMHeader ele)

void	_bm_select_history_store_after_notest (BMesh bm, BMEditSelection ese_ref, BMHeader *ele)

void	_bm_select_history_store_after (BMesh bm, BMEditSelection ese_ref, BMHeader *ele)

void	BM_select_history_clear (BMesh *bm)

void	BM_select_history_validate (BMesh *bm)

bool	BM_select_history_active_get (BMesh bm, BMEditSelection ese)

GHash *	BM_select_history_map_create (BMesh *bm)

void	BM_select_history_merge_from_targetmap (BMesh bm, GHash vert_map, GHash edge_map, GHash face_map, const bool use_chain)

void	BM_mesh_elem_hflag_disable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)

void	BM_mesh_elem_hflag_enable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)

void	BM_mesh_elem_hflag_disable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)

void	BM_mesh_elem_hflag_enable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)

static void	vert_flush_hide_set (BMVert *v)

static void	edge_flush_hide_set (BMEdge *e)

void	BM_vert_hide_set (BMVert *v, const bool hide)

void	BM_edge_hide_set (BMEdge *e, const bool hide)

void	BM_face_hide_set (BMFace *f, const bool hide)

void	_bm_elem_hide_set (BMesh bm, BMHeader head, const bool hide)

Recounting total selection.
static void	recount_totsels_range_vert_func (void , MempoolIterData iter, const TaskParallelTLS *__restrict tls)

static void	recount_totsels_range_edge_func (void , MempoolIterData iter, const TaskParallelTLS *__restrict tls)

static void	recount_totsels_range_face_func (void , MempoolIterData iter, const TaskParallelTLS *__restrict tls)

static void	recount_totsels_reduce (const void __restrict, void __restrict chunk_join, void *__restrict chunk)

static TaskParallelMempoolFunc	recount_totsels_get_range_func (BMIterType iter_type)

static int	recount_totsel (BMesh *bm, BMIterType iter_type)

static void	recount_totvertsel (BMesh *bm)

static void	recount_totedgesel (BMesh *bm)

static void	recount_totfacesel (BMesh *bm)

static void	recount_totsels (BMesh *bm)

static bool	recount_totsels_are_ok (BMesh *bm)

BMesh helper functions for selection & hide flushing.
static bool	bm_vert_is_edge_select_any_other (const BMVert v, const BMEdge e_first)

static bool	bm_vert_is_edge_visible_any (const BMVert *v)

static bool	bm_edge_is_face_select_any_other (BMLoop *l_first)

static bool	bm_edge_is_face_visible_any (const BMEdge *e)

Select mode flush selection
static void	bm_mesh_select_mode_flush_vert_to_edge_iter_fn (void , MempoolIterData iter, const TaskParallelTLS *__restrict tls)

static void	bm_mesh_select_mode_flush_edge_to_face_iter_fn (void , MempoolIterData iter, const TaskParallelTLS *__restrict tls)

static void	bm_mesh_select_mode_flush_reduce_fn (const void __restrict, void __restrict chunk_join, void *__restrict chunk)

static void	bm_mesh_select_mode_flush_vert_to_edge (BMesh *bm)

static void	bm_mesh_select_mode_flush_edge_to_face (BMesh *bm)

void	BM_mesh_select_mode_flush_ex (BMesh *bm, const short selectmode, eBMSelectionFlushFLags flags)
	Select Mode Flush.

void	BM_mesh_select_mode_flush (BMesh *bm)

Non Flushing Versions Element Selection
void	BM_edge_select_set_noflush (BMesh bm, BMEdge e, const bool select)

void	BM_face_select_set_noflush (BMesh bm, BMFace f, const bool select)

Detailed Description

Selection routines for bmesh structures. This is actually all old code ripped from editmesh_lib.c and slightly modified to work for bmesh's. This also means that it has some of the same problems.... something that that should be addressed eventually.

Definition in file bmesh_marking.cc.

Function Documentation

◆ _bm_elem_hide_set()

void _bm_elem_hide_set	(	BMesh *	bm,
		BMHeader *	head,
		const bool	hide )

Definition at line 1495 of file bmesh_marking.cc.

References bm, BM_EDGE, BM_edge_hide_set(), BM_edge_select_set(), BM_FACE, BM_face_hide_set(), BM_face_select_set(), BM_VERT, BM_vert_hide_set(), BM_vert_select_set(), BMESH_ASSERT, and BMHeader::htype.

◆ _bm_select_history_check()

bool _bm_select_history_check	(	BMesh *	bm,
		const BMHeader *	ele )

Definition at line 1055 of file bmesh_marking.cc.

References BLI_findptr(), bm, offsetof, and BMesh::selected.

◆ _bm_select_history_remove()

bool _bm_select_history_remove	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1060 of file bmesh_marking.cc.

References BLI_findptr(), BLI_freelinkN(), bm, offsetof, and BMesh::selected.

◆ _bm_select_history_store()

void _bm_select_history_store	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1083 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_notest.

◆ _bm_select_history_store_after()

void _bm_select_history_store_after	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele )

Definition at line 1103 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_after_notest.

◆ _bm_select_history_store_after_notest()

void _bm_select_history_store_after_notest	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele )

Definition at line 1097 of file bmesh_marking.cc.

References BLI_insertlinkafter(), bm, bm_select_history_create(), and BMesh::selected.

◆ _bm_select_history_store_head()

void _bm_select_history_store_head	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1090 of file bmesh_marking.cc.

References bm, BM_select_history_check, and BM_select_history_store_head_notest.

◆ _bm_select_history_store_head_notest()

void _bm_select_history_store_head_notest	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1077 of file bmesh_marking.cc.

References BLI_addhead(), bm, bm_select_history_create(), and BMesh::selected.

◆ _bm_select_history_store_notest()

void _bm_select_history_store_notest	(	BMesh *	bm,
		BMHeader *	ele )

Definition at line 1071 of file bmesh_marking.cc.

References BLI_addtail(), bm, bm_select_history_create(), and BMesh::selected.

◆ BM_edge_hide_set()

void BM_edge_hide_set	(	BMEdge *	e,
		const bool	hide )

Definition at line 1431 of file bmesh_marking.cc.

References BLI_assert, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, BMLoop::f, BMVert::head, BMHeader::htype, BMLoop::radial_next, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

◆ bm_edge_is_face_select_any_other()

static bool bm_edge_is_face_select_any_other ( BMLoop * l_first )

static

Definition at line 197 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_SELECT, BMLoop::f, and BMLoop::radial_next.

Referenced by BM_face_select_set().

◆ bm_edge_is_face_visible_any()

static bool bm_edge_is_face_visible_any ( const BMEdge * e )

static

Definition at line 226 of file bmesh_marking.cc.

References BM_elem_flag_test, BM_ELEM_HIDDEN, e, BMLoop::f, and BMLoop::radial_next.

Referenced by edge_flush_hide_set().

◆ BM_edge_select_set()

void BM_edge_select_set	(	BMesh *	bm,
		BMEdge *	e,
		bool	select )

Select Edge.

Changes selection state of a single edge in a mesh.

Definition at line 538 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), e, BMVert::head, BMHeader::htype, SCE_SELECT_VERTEX, select(), BMesh::selectmode, BMesh::totedgesel, and v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), BM_face_select_set(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_clean_ex(), BM_mesh_select_mode_set(), bm_vert_connect_select_history(), do_lasso_select_mesh__doSelectEdge_pass0(), do_lasso_select_mesh__doSelectEdge_pass1(), do_mesh_box_select__doSelectEdge_pass0(), do_mesh_box_select__doSelectEdge_pass1(), edbm_add_edge_face_exec__tricky_extend_sel(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_edges(), edbm_intersect_select(), edbm_polybuild_transform_at_cursor_invoke(), edbm_region_to_loop_exec(), edbm_rip_edge_invoke(), edbm_ripsel_deselect_helper(), edbm_select_linked_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), edbm_select_non_manifold_exec(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_sharp_edges_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), edgering_select(), edgetag_set_cb(), knife_make_cuts(), knife_make_face_cuts(), mesh_circle_doSelectEdge(), mouse_mesh_shortest_path_edge(), similar_edge_select_exec(), uv_hide_exec(), uvedit_edge_select_disable(), and uvedit_edge_select_enable().

◆ BM_edge_select_set_noflush()

void BM_edge_select_set_noflush	(	BMesh *	bm,
		BMEdge *	e,
		const bool	select )

Definition at line 657 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, BMVert::head, BMHeader::htype, select(), and BMesh::totedgesel.

Referenced by BM_face_select_set().

◆ BM_editselection_center()

void BM_editselection_center	(	BMEditSelection *	ese,
		float	r_center[3] )

Generic way to get data from an BMEditSelection type These functions were written to be used by the Modifier widget when in Rotate about active mode, but can be used anywhere.

Definition at line 944 of file bmesh_marking.cc.

References BM_EDGE, BM_FACE, BM_face_calc_center_median(), BM_VERT, BMVert::co, copy_v3_v3(), BMEditSelection::ele, BMEditSelection::htype, mid_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by BM_editselection_plane(), blender::ed::object::calc_active_center_for_editmode(), transform_convert_mesh_islands_calc(), and uv_map_transform_center().

◆ BM_editselection_normal()

void BM_editselection_normal	(	BMEditSelection *	ese,
		float	r_normal[3] )

Definition at line 960 of file bmesh_marking.cc.

References add_v3_v3v3(), BM_EDGE, BM_FACE, BM_VERT, BMVert::co, copy_v3_v3(), cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, BMFace::no, BMVert::no, normalize_v3(), sub_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by getTransformOrientation_ex(), and transform_convert_mesh_islands_calc().

◆ BM_editselection_plane()

void BM_editselection_plane	(	BMEditSelection *	ese,
		float	r_plane[3] )

Calculate a plane that is right angles to the edge/vert/faces normal also make the plane run along an axis that is related to the geometry, because this is used for the gizmos Y axis.

Definition at line 988 of file bmesh_marking.cc.

References BM_EDGE, BM_edge_is_boundary(), BM_editselection_center(), BM_FACE, BM_face_calc_tangent_auto(), BM_VERT, BMVert::co, cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, BMEdge::l, BMLoop::next, BMVert::no, normalize_v3(), BMEditSelection::prev, sub_v3_v3v3(), BMLoop::v, BMEdge::v1, and BMEdge::v2.

Referenced by getTransformOrientation_ex(), and transform_convert_mesh_islands_calc().

◆ BM_elem_select_set()

void BM_elem_select_set	(	BMesh *	bm,
		BMElem *	ele,
		bool	select )

Note: use BM_elem_flag_test(ele, BM_ELEM_SELECT) to test selection; by design, this will not touch the editselection history stuff

Definition at line 818 of file bmesh_marking.cc.

References BLI_assert, bm, BM_EDGE, BM_edge_select_set(), BM_FACE, BM_face_select_set(), BM_VERT, BM_vert_select_set(), BMElem::head, BMHeader::htype, and select().

Referenced by BM_elem_select_copy(), BM_mesh_elem_hflag_disable_test(), BM_mesh_elem_hflag_enable_test(), BMO_slot_buffer_hflag_disable(), BMO_slot_buffer_hflag_enable(), bpy_bm_elem_hflag_set(), bpy_bm_elem_select_set(), edbm_extrude_ex(), EDBM_mesh_reveal(), edbm_select_by_attribute_exec(), walker_deselect_nth(), and walker_select().

◆ BM_face_hide_set()

void BM_face_hide_set	(	BMFace *	f,
		const bool	hide )

Definition at line 1460 of file bmesh_marking.cc.

References BLI_assert, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, BMLoop::e, edge_flush_hide_set(), BMFace::head, BMHeader::htype, BMLoop::next, BMLoop::v, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

◆ BM_face_select_set()

void BM_face_select_set	(	BMesh *	bm,
		BMFace *	f,
		bool	select )

Select Face.

Changes selection state of a single face in a mesh.

Note: This allows a temporarily invalid state - where for eg an edge bay be de-selected, but an adjacent face remains selected.

Rely on BM_mesh_select_mode_flush to correct these cases.

Note: flushing based on mode, see #46494; use BM_edge_select_set_noflush, vertex flushing is handled last.

Definition at line 578 of file bmesh_marking.cc.

References BLI_assert, bm, bm_edge_is_face_select_any_other(), BM_edge_select_set(), BM_edge_select_set_noflush(), BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), BMLoop::e, BMFace::head, BMHeader::htype, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_VERTEX, select(), BMesh::selectmode, BMesh::totfacesel, and BMLoop::v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), bm_face_split_by_edges(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_set(), do_lasso_select_mesh__doSelectFace(), do_mesh_box_select__doSelectFace(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_faces(), EDBM_deselect_by_material(), edbm_extrude_discrete_faces(), edbm_loop_to_region_exec(), edbm_mod_weighted_strength_exec(), edbm_polybuild_transform_at_cursor_invoke(), edbm_select_face_by_sides_exec(), EDBM_select_interior_faces(), edbm_select_linked_exec(), edbm_select_linked_flat_faces_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_similar_region_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), facetag_set_cb(), mesh_circle_doSelectFace(), similar_face_select_exec(), uv_hide_exec(), uvedit_edge_select_disable(), uvedit_edge_select_enable(), uvedit_face_select_disable(), uvedit_face_select_enable(), uvedit_uv_select_disable(), and uvedit_uv_select_enable().

◆ BM_face_select_set_noflush()

void BM_face_select_set_noflush	(	BMesh *	bm,
		BMFace *	f,
		const bool	select )

Definition at line 679 of file bmesh_marking.cc.

References BLI_assert, bm, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BMFace::head, BMHeader::htype, select(), and BMesh::totfacesel.

◆ BM_mesh_active_edge_get()

BMEdge * BM_mesh_active_edge_get ( BMesh * bm )

Definition at line 905 of file bmesh_marking.cc.

References bm, BM_EDGE, BMEditSelection::ele, BMEditSelection::htype, ListBase::last, and BMesh::selected.

Referenced by BM_mesh_active_edge_index_get(), BM_mesh_region_match(), blender::draw::mesh_render_data_create(), and uv_shortest_path_pick_invoke().

◆ BM_mesh_active_edge_index_get()

int BM_mesh_active_edge_index_get ( BMesh * bm )

Definition at line 847 of file bmesh_marking.cc.

References bm, BM_elem_index_get, BM_mesh_active_edge_get(), and e.

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

◆ BM_mesh_active_elem_get()

BMElem * BM_mesh_active_elem_get ( BMesh * bm )

Definition at line 931 of file bmesh_marking.cc.

References bm, BMEditSelection::ele, ListBase::last, and BMesh::selected.

Referenced by BM_mesh_active_elem_index_get(), deselect_nth_active(), edbm_elem_active_elem_or_face_get(), edbm_preselect_or_active(), and blender::ed::mesh::set_attribute::mesh_set_attribute_invoke().

◆ BM_mesh_active_elem_index_get()

int BM_mesh_active_elem_index_get ( BMesh * bm )

Definition at line 859 of file bmesh_marking.cc.

References bm, BM_elem_index_get, BM_mesh_active_elem_get(), and e.

◆ BM_mesh_active_face_get()

BMFace * BM_mesh_active_face_get	(	BMesh *	bm,
		const bool	is_sloppy,
		const bool	is_selected )

◆ BM_mesh_active_face_index_get()

int BM_mesh_active_face_index_get	(	BMesh *	bm,
		bool	is_sloppy,
		bool	is_selected )

Definition at line 841 of file bmesh_marking.cc.

References bm, BM_elem_index_get, and BM_mesh_active_face_get().

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

◆ BM_mesh_active_face_set()

void BM_mesh_active_face_set	(	BMesh *	bm,
		BMFace *	f )

Definition at line 836 of file bmesh_marking.cc.

References BMesh::act_face, and bm.

Referenced by EDBM_select_pick(), mouse_mesh_loop(), mouse_mesh_shortest_path_face(), mouse_mesh_uv_shortest_path_face(), and uv_mouse_select_multi().

◆ BM_mesh_active_vert_get()

BMVert * BM_mesh_active_vert_get ( BMesh * bm )

Definition at line 918 of file bmesh_marking.cc.

References bm, BM_VERT, BMEditSelection::ele, BMEditSelection::htype, ListBase::last, and BMesh::selected.

Referenced by BM_mesh_active_vert_index_get(), ED_mesh_active_dvert_get_em(), edbm_fill_grid_prepare(), edbm_select_axis_exec(), getTransformOrientation_ex(), blender::draw::mesh_render_data_create(), and uv_shortest_path_pick_invoke().

◆ BM_mesh_active_vert_index_get()

int BM_mesh_active_vert_index_get ( BMesh * bm )

Definition at line 853 of file bmesh_marking.cc.

References bm, BM_elem_index_get, BM_mesh_active_vert_get(), and v.

Referenced by blender::ed::geometry::get_original_geometry_eval_copy().

◆ BM_mesh_deselect_flush()

void BM_mesh_deselect_flush ( BMesh * bm )

Mode independent de-selection flush (up/down).

Definition at line 442 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_ITER_MESH, BM_select_history_validate(), e, BMLoop::f, BMLoop::radial_next, and recount_totsels().

Referenced by bpy_bmesh_select_flush(), EDBM_deselect_flush(), and EDBM_selectmode_convert().

◆ BM_mesh_elem_hflag_count_disabled()

int BM_mesh_elem_hflag_count_disabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 810 of file bmesh_marking.cc.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

◆ BM_mesh_elem_hflag_count_enabled()

int BM_mesh_elem_hflag_count_enabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 802 of file bmesh_marking.cc.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

◆ BM_mesh_elem_hflag_disable_all()

void BM_mesh_elem_hflag_disable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 1367 of file bmesh_marking.cc.

References bm, and BM_mesh_elem_hflag_disable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_bisect_plane(), BM_mesh_calc_edge_groups_as_arrays(), BM_mesh_esubdivide(), BM_mesh_intersect(), BM_mesh_region_match(), BM_mesh_wireframe(), bmo_bevel_exec(), bmo_bisect_plane_exec(), bmo_edgenet_fill_exec(), bmo_face_attribute_fill_exec(), bmo_holes_fill_exec(), bmo_inset_individual_exec(), bmo_inset_region_exec(), bmo_offset_edgeloops_exec(), bmo_split_edges_exec(), bmo_subdivide_edgering_exec(), bmo_triangulate_exec(), bmo_wireframe_exec(), bridge_loop_pair(), build_hull(), cylinder_project_exec(), blender::ed::sculpt_paint::face_set::delete_geometry(), do_lasso_select_mesh_uv(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_bridge_tag_boundary_edges(), edbm_delete_edgeloop_exec(), edbm_delete_loose_exec(), EDBM_flag_disable_all(), edbm_intersect_select(), edbm_loop_to_region_exec(), edbm_offset_edgeloop_exec(), EDBM_op_call_and_selectf(), edbm_region_to_loop_exec(), edbm_select_linked_flat_faces_exec(), edbm_split_exec(), edbm_wireframe_exec(), geometry_extract_apply(), geometry_extract_tag_face_set(), geometry_extract_tag_masked_faces(), hull_merge_triangles(), knifeproject_exec(), mesh_separate_loose(), mesh_separate_material(), mesh_separate_selected(), mesh_separate_tagged(), mesh_symmetry_snap_exec(), multires_unsubdivide_prepare_original_bmesh_for_extract(), multires_unsubdivide_single_level(), multires_unsubdivide_to_basemesh(), skin_fix_hole_no_good_verts(), skin_smooth_hulls(), slice_paint_mask(), smart_uv_project_calculate_project_normals(), special_aftertrans_update__mesh(), sphere_project_exec(), blender::ed::sculpt_paint::symmetrize_exec(), unsubdivide_build_base_mesh_from_tags(), blender::ed::sculpt_paint::trim::update_normals(), uv_box_select_exec(), uv_circle_select_exec(), uv_select_edgering(), uv_select_faceloop(), uv_select_flush_from_tag_loop(), uv_select_more_less(), uv_select_overlap(), and blender::ed::object::vgroup_mirror().

◆ BM_mesh_elem_hflag_disable_test()

void BM_mesh_elem_hflag_disable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test )

Definition at line 1244 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_select_history_clear(), BM_VERT, BM_VERTS_OF_MESH, BMesh::totedgesel, BMesh::totfacesel, BMesh::totvertsel, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_disable_all().

◆ BM_mesh_elem_hflag_enable_all()

void BM_mesh_elem_hflag_enable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide )

Definition at line 1376 of file bmesh_marking.cc.

References bm, and BM_mesh_elem_hflag_enable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_calc_path_region_edge(), BM_mesh_calc_path_region_face(), BM_mesh_calc_path_uv_region_face(), BM_mesh_edgesplit(), BM_mesh_separate_faces(), bmo_inset_region_exec(), EDBM_flag_enable_all(), EDBM_mesh_knife(), slice_paint_mask(), unsubdivide_build_base_mesh_from_tags(), and blender::ed::sculpt_paint::trim::update_normals().

◆ BM_mesh_elem_hflag_enable_test()

void BM_mesh_elem_hflag_enable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test )

Definition at line 1313 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_VERT, BM_VERTS_OF_MESH, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_enable_all(), edbm_delete_edgeloop_exec(), edbm_edge_rotate_selected_exec(), edbm_remove_doubles_exec(), knifeproject_exec(), mesh_separate_selected(), and uv_reveal_exec().

◆ bm_mesh_flag_count()

static int bm_mesh_flag_count	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	test_for_enabled )

static

counts number of elements with flag enabled/disabled

Definition at line 756 of file bmesh_marking.cc.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_test, BM_elem_flag_test_bool, BM_ELEM_HIDDEN, BM_FACE, BM_FACES_OF_MESH, BM_ITER_MESH, BM_VERT, and BM_VERTS_OF_MESH.

Referenced by BM_mesh_elem_hflag_count_disabled(), and BM_mesh_elem_hflag_count_enabled().

◆ BM_mesh_select_flush()

void BM_mesh_select_flush ( BMesh * bm )

Mode independent selection flush (up/down).

Definition at line 474 of file bmesh_marking.cc.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, e, BMLoop::next, recount_totsels(), and BMLoop::v.

Referenced by BM_mesh_esubdivide(), bpy_bmesh_select_flush(), and EDBM_select_flush().

◆ BM_mesh_select_mode_clean()

void BM_mesh_select_mode_clean ( BMesh * bm )

Definition at line 302 of file bmesh_marking.cc.

References bm, BM_mesh_select_mode_clean_ex(), and BMesh::selectmode.

Referenced by EDBM_select_less().

◆ BM_mesh_select_mode_clean_ex()

void BM_mesh_select_mode_clean_ex	(	BMesh *	bm,
		short	selectmode )

Select Mode Clean.

Remove isolated selected elements when in a mode doesn't support them. eg: in edge-mode a selected vertex must be connected to a selected edge.

Note: this could be made a part of BM_mesh_select_mode_flush_ex

Definition at line 242 of file bmesh_marking.cc.

References bm, BM_edge_select_set(), BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, BM_vert_select_set(), BM_VERTS_OF_MESH, BMLoop::e, e, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_FACE, SCE_SELECT_VERTEX, BMesh::totedgesel, BMesh::totfacesel, BMesh::totvertsel, and v.

Referenced by BM_mesh_select_mode_clean(), and edbm_rip_invoke__edge().

◆ BM_mesh_select_mode_flush()

void BM_mesh_select_mode_flush ( BMesh * bm )

Definition at line 435 of file bmesh_marking.cc.

References bm, BM_mesh_select_mode_flush_ex(), BM_SELECT_LEN_FLUSH_RECALC_ALL, and BMesh::selectmode.

Referenced by BM_mesh_select_mode_set(), bmesh_edit_end(), bpy_bmesh_select_flush_mode(), edbm_rip_edge_invoke(), knifeproject_exec(), and uv_hide_exec().

◆ bm_mesh_select_mode_flush_edge_to_face()

static void bm_mesh_select_mode_flush_edge_to_face ( BMesh * bm )

static

Definition at line 394 of file bmesh_marking.cc.

References BLI_parallel_range_settings_defaults(), bm, BM_FACES_OF_MESH, bm_mesh_select_mode_flush_edge_to_face_iter_fn(), bm_mesh_select_mode_flush_reduce_fn(), BM_THREAD_LIMIT, SelectionFlushChunkData::delta_selection_len, BMesh::totface, and BMesh::totfacesel.

Referenced by BM_mesh_select_mode_flush_ex().

◆ bm_mesh_select_mode_flush_edge_to_face_iter_fn()

static void bm_mesh_select_mode_flush_edge_to_face_iter_fn	(	void *	,
		MempoolIterData *	iter,
		const TaskParallelTLS *__restrict	tls )

static

Definition at line 336 of file bmesh_marking.cc.

References BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, SelectionFlushChunkData::delta_selection_len, BMLoop::e, and BMLoop::next.

Referenced by bm_mesh_select_mode_flush_edge_to_face().

◆ BM_mesh_select_mode_flush_ex()

void BM_mesh_select_mode_flush_ex	(	BMesh *	bm,
		short	selectmode,
		eBMSelectionFlushFLags	flags )

Select Mode Flush.

Makes sure to flush selections 'upwards' (ie: all verts of an edge selects the edge and so on). This should only be called by system and not tool authors.

Definition at line 410 of file bmesh_marking.cc.

References BLI_assert, bm, bm_mesh_select_mode_flush_edge_to_face(), bm_mesh_select_mode_flush_vert_to_edge(), BM_select_history_validate(), BM_SELECT_LEN_FLUSH_RECALC_EDGE, BM_SELECT_LEN_FLUSH_RECALC_FACE, BM_SELECT_LEN_FLUSH_RECALC_VERT, recount_totedgesel(), recount_totfacesel(), recount_totsels_are_ok(), recount_totvertsel(), SCE_SELECT_EDGE, and SCE_SELECT_VERTEX.